LM63625DQPWPRQ1

@@ -71,7 +71,7 @@         "number": "4",         "name": "VCC",         "type": "power_out",-        "description": "Internal 5V LDO regulated output for control circuit supply; connect 1\u00b5F quality capacitor to PGND; output voltage 4.75V to 5.25V nominal; do not connect external loads."+        "description": "Internal 5V LDO regulated output for control circuit supply; connect 1µF quality capacitor to PGND; output voltage 4.75V to 5.25V nominal; do not connect external loads."       },       {         "number": "5",@@ -83,25 +83,25 @@         "number": "6",         "name": "VSEL",         "type": "input",-        "description": "Output voltage selection input; connect to VCC for 5V fixed output, connect to AGND for 3.3V fixed output, or connect 10k\u03a9 resistor to AGND for adjustable output 1V to 20V; cannot be left floating."+        "description": "Output voltage selection input; connect to VCC for 5V fixed output, connect to AGND for 3.3V fixed output, or connect 10kΩ resistor to AGND for adjustable output 1V to 20V; cannot be left floating."       },       {         "number": "7",         "name": "SYNC/MODE",         "type": "input",-        "description": "Mode selection and external synchronization clock input; connect to VCC for forced PWM mode, connect to AGND for automatic PFM/PWM mode, or apply external clock 250kHz to 2200kHz for synchronized operation; includes 100k\u03a9 internal pull-down."+        "description": "Mode selection and external synchronization clock input; connect to VCC for forced PWM mode, connect to AGND for automatic PFM/PWM mode, or apply external clock 250kHz to 2200kHz for synchronized operation; includes 100kΩ internal pull-down."       },       {         "number": "8",         "name": "RESET",         "type": "output",-        "description": "Open-drain power good flag output; pulled low when output voltage exceeds \u00b112% deviation, during soft-start, upon internal fault, or when EN input is low; connect through 10k\u03a9 to 100k\u03a9 current-limiting resistor to logic supply."+        "description": "Open-drain power good flag output; pulled low when output voltage exceeds ±12% deviation, during soft-start, upon internal fault, or when EN input is low; connect through 10kΩ to 100kΩ current-limiting resistor to logic supply."       },       {         "number": "9",         "name": "FB",         "type": "input",-        "description": "Feedback input to output voltage regulation loop; regulated to 1.0V internal reference in adjustable mode, 5.0V in 5V fixed mode, or 3.3V in 3.3V fixed mode; input bias current 0.1\u00b5A to 3.4\u00b5A depending on mode."+        "description": "Feedback input to output voltage regulation loop; regulated to 1.0V internal reference in adjustable mode, 5.0V in 5V fixed mode, or 3.3V in 3.3V fixed mode; input bias current 0.1µA to 3.4µA depending on mode."       },       {         "number": "10",@@ -113,13 +113,13 @@         "number": "11",         "name": "EN",         "type": "input",-        "description": "Precision enable input to regulator; voltage \u22651.425V enables soft-start and regulation, voltage \u22640.94V disables converter; cannot be left floating; can be directly connected to VIN or through external divider for custom UVLO threshold."+        "description": "Precision enable input to regulator; voltage ≥1.425V enables soft-start and regulation, voltage ≤0.94V disables converter; cannot be left floating; can be directly connected to VIN or through external divider for custom UVLO threshold."       },       {         "number": "12",         "name": "VIN",         "type": "power_in",-        "description": "Input power supply rail; accepts 3.5V to 36V input voltage; bypass with 4.7\u00b5F quality ceramic capacitor and 220nF capacitor placed within 1mm of VIN and PGND pins; quiescent input current 23\u00b5A typical."+        "description": "Input power supply rail; accepts 3.5V to 36V input voltage; bypass with 4.7µF quality ceramic capacitor and 220nF capacitor placed within 1mm of VIN and PGND pins; quiescent input current 23µA typical."       },       {         "number": "13",@@ -186,6 +186,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm63625dqpwprq1.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          5.0,+          1.1+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "7982746831c0bd23f4690608869ad67776faae5c762fb0376666126a3998921b",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm63625dqpwprq1-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          5.0,+          1.1+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "4eeeebfc8c9b3b0150315aba4166589db9eade84b704eca6be4c2161d02b1210",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}