main
Ray
Publish 0.1.1
962856a
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276
{
"schema_version": 1,
"type": "component",
"slug": "lm53603ampwpr",
"title": "LM53603AMPWPR",
"brief": "Texas Instruments DC-DC Converters, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.1",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"power supply chip",
"lm53603ampwpr",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "LM53603AMPWPR",
"manufacturer": "Texas Instruments",
"package": "HTSSOP-16-EP",
"pin_count": 17,
"category": "Power Supply Chip",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.ti.com/cn/lit/gpn/lm53602",
"parts": {
"symbol": "lm53603ampwpr.kicad_sym",
"footprint": "lm53603ampwpr.kicad_mod",
"model_3d": "lm53603ampwpr-hero.glb",
"model_3d_plain": "lm53603ampwpr.glb",
"model_3d_step": "lm53603ampwpr-etched.step",
"model_3d_step_plain": "lm53603ampwpr.step",
"lbr": "lm53603ampwpr.lbr"
},
"distributor_links": {
"lcsc": "C2071524",
"digikey": "296-48587-2-ND",
"mouser": "595-LM53603AMPWPR"
},
"distributor_check": {
"checked_at": "2026-10-01T00:39:31Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-48587-2-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-LM53603AMPWPR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "SW",
"type": "output",
"description": "Regulator switch node driven by internal high-side and low-side switches connected to power inductor; connect pins 1 and 2 directly together at the PCB."
},
{
"number": "2",
"name": "SW",
"type": "output",
"description": "Regulator switch node driven by internal high-side and low-side switches connected to power inductor; connect pins 1 and 2 directly together at the PCB."
},
{
"number": "3",
"name": "CBOOT",
"type": "power_out",
"description": "Bootstrap supply output for gate drivers with voltage rating -0.3 to 3.6 V; connect a 470-nF capacitor from this pin to SW."
},
{
"number": "4",
"name": "VCC",
"type": "power_out",
"description": "Internal 3.15-V regulator output used as supply to internal control circuits with nominal voltage 3.15 V (VBIAS = 3.3 V); do not connect to external loads."
},
{
"number": "5",
"name": "BIAS",
"type": "power_in",
"description": "Input to internal voltage regulator connected to output voltage point with voltage rating -0.3 to 16 V; do not ground."
},
{
"number": "6",
"name": "SYNC",
"type": "input",
"description": "Synchronization input to regulator used to synchronize switching frequency to system clock with frequency range 1.9 to 2.3 MHz; connect to GND when not used."
},
{
"number": "7",
"name": "FPWM",
"type": "input",
"description": "Mode control input to regulator with logic levels VIH ≥ 1.5 V for forced PWM mode and VIL ≤ 0.4 V for automatic PFM/PWM mode; do not float."
},
{
"number": "8",
"name": "RESET",
"type": "tri_state",
"description": "Open-drain reset output indicating power OK (high) or fault (low) with upper threshold 105% to 110% and lower threshold 92% to 96.5% of nominal output voltage."
},
{
"number": "9",
"name": "FB",
"type": "input",
"description": "Feedback input to regulator connected to output voltage sense point for fixed outputs or feedback divider tap point for adjustable option with bias current 10 nA; do not float or ground."
},
{
"number": "10",
"name": "AGND",
"type": "power_in",
"description": "Analog ground for regulator and system with respect to which all electrical parameters are measured; connect to EP and PGND on PCB."
},
{
"number": "11",
"name": "EN",
"type": "input",
"description": "Enable input to regulator (high = ON, low = OFF) with rising threshold 1.7 to 2 V and falling shutdown voltage 0.8 V; can be connected directly to VIN."
},
{
"number": "12",
"name": "VIN",
"type": "power_in",
"description": "Input supply to regulator with recommended range 3.9 to 36 V and absolute maximum -0.3 to 40 V; connect pins 12 and 13 directly together at the PCB."
},
{
"number": "13",
"name": "VIN",
"type": "power_in",
"description": "Input supply to regulator with recommended range 3.9 to 36 V and absolute maximum -0.3 to 40 V; connect pins 12 and 13 directly together at the PCB."
},
{
"number": "14",
"name": "N/C",
"type": "unconnected",
"description": "No connection to device."
},
{
"number": "15",
"name": "PGND",
"type": "power_in",
"description": "Power ground to internal low-side MOSFET connected to AGND and system ground; connect pins 15 and 16 directly together at the PCB."
},
{
"number": "16",
"name": "PGND",
"type": "power_in",
"description": "Power ground to internal low-side MOSFET connected to AGND and system ground; connect pins 15 and 16 directly together at the PCB."
},
{
"number": "17",
"name": "EP",
"type": "power_in",
"description": "Exposed die attach paddle connected to ground plane for adequate heat sinking and noise reduction."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [],
"pages_sent": 10,
"cost_usd": 0.16,
"at": "2026-10-01T00:39:15"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/lm53602",
"pages": 40,
"sha256": "590d70f52aa0f37f",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 17,
"described": 17,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lm53603ampwpr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
5,
1.1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "7982746831c0bd23f4690608869ad67776faae5c762fb0376666126a3998921b",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lm53603ampwpr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
5,
1.1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "26e36a09313cab2c08632abfe2bc7d9052a5acc8d0a6c854b2ad83aca911eb3a",
"checked": "2026-11-17",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "HTSSOP-16-EP",
"Category": "Power Supply Chip",
"Pins": "17"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"lm53603ampwpr"
],
"discovery_pitch": "LM53603AMPWPR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lm53603ampwpr.kicad_sym",
"lm53603ampwpr.kicad_mod",
"lm53603ampwpr.glb",
"lm53603ampwpr.step",
"lm53603ampwpr.lbr",
"docs/hero.png",
"docs/lm53603ampwpr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lm53603ampwpr-etched.step",
"lm53603ampwpr-hero.glb",
"lm53603ampwpr-hero.overlay.json"
],
"visibility": "public",
"description": "Texas Instruments DC-DC Converters, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"org": "adom"
}