LM53601NQDSXRQ1

{
  "schema_version": 1,
  "type": "component",
  "slug": "lm53601nqdsxrq1",
  "title": "LM53601NQDSXRQ1",
  "brief": "Texas Instruments DC-DC Converters, WSON-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "lm53601nqdsxrq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "LM53601NQDSXRQ1",
    "manufacturer": "Texas Instruments",
    "package": "WSON-10-EP(3x3)",
    "pin_count": 11,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm53601-q1",
    "parts": {
      "symbol": "lm53601nqdsxrq1.kicad_sym",
      "footprint": "lm53601nqdsxrq1.kicad_mod",
      "model_3d": "lm53601nqdsxrq1-hero.glb",
      "model_3d_plain": "lm53601nqdsxrq1.glb",
      "model_3d_step": "lm53601nqdsxrq1-etched.step",
      "model_3d_step_plain": "lm53601nqdsxrq1.step",
      "lbr": "lm53601nqdsxrq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C2073087",
      "digikey": "LM53601NQDSXRQ1-ND",
      "mouser": "595-LM53601NQDSXRQ1"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T15:32:12Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LM53601NQDSXRQ1-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-LM53601NQDSXRQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SW",
        "type": "power_out",
        "description": "Regulator switch node, connected to the output inductor."
      },
      {
        "number": "2",
        "name": "BOOT",
        "type": "input",
        "description": "High-side gate driver upper supply rail; connect a 100-nF capacitor from SW to BOOT, charged by an internal diode while SW is low. Absolute maximum BOOT to SW is 3.6 V."
      },
      {
        "number": "3",
        "name": "VCC",
        "type": "power_out",
        "description": "Internal 3-V regulator output supplying the internal control circuits; connect a high-quality 1.0-µF capacitor from this pin to AGND for the fixed version."
      },
      {
        "number": "4",
        "name": "FB",
        "type": "input",
        "description": "Fixed version only: feedback for the output voltage and power source for the VCC regulator, connected to the output node with a 10-nF bypass capacitor placed immediately adjacent to the pin; FB to GND absolute maximum is 16 V for the 3.3-V and 5-V versions."
      },
      {
        "number": "5",
        "name": "AGND",
        "type": "power_in",
        "description": "Fixed version only: ground to which the input signals and FB are compared; GND to AGND is limited to ±0.3 V DC (1 µs or less for up to −1 V to 2 V)."
      },
      {
        "number": "6",
        "name": "RESET",
        "type": "output",
        "description": "Open-drain reset output that requires a current-limiting pull-up resistor to a suitable supply; high means regulator OK and low means regulator fault, and it goes low when EN is low; RESET to GND absolute maximum is 8 V and sink current is limited to 8 mA."
      },
      {
        "number": "7",
        "name": "EN",
        "type": "input",
        "description": "Enable input: high turns the regulator on and low turns it off; it can be connected to VIN but must not be left floating (EN to GND absolute maximum is 42 V)."
      },
      {
        "number": "8",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply to the regulator; input bypass capacitors connect directly between this pin and GND (VIN to GND absolute maximum is 42 V, recommended input range 3.8 V to 36 V after startup)."
      },
      {
        "number": "9",
        "name": "SYNC/MODE",
        "type": "input",
        "description": "Multifunction mode control tolerant of voltages up to VIN: a valid external clock forces PWM and synchronizes the switching on its rising edge, tied high gives forced PWM at the internal clock, and tied low gives AUTO mode with diode emulation at light load; it must not be left floating."
      },
      {
        "number": "10",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground, bypassed to VIN immediately adjacent to this pin."
      },
      {
        "number": "11",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MPN LM53601NQDSXRQ1 is listed in the device comparison as a 3.3 V output, wettable-flank part (p; The exposed pad is labeled 'DAP' in the datasheet pin table and has no numeric pin number; it is lis; Pin types are mapped to KiCad classes from the datasheet's P/I/O/G codes: GND/AGND/DAP as power_in, ",
          "exposed pad 11 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 10,
        "cost_usd": 0.085,
        "at": "2026-10-08T15:31:55"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm53601-q1",
        "pages": 51,
        "sha256": "d174c97c59a34282",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm53601nqdsxrq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3,
          2.98,
          1.02
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "1b436233b33ebba84da89538e97b0062d5b95e5ae0b484c46c569cb67274a3a5",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm53601nqdsxrq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3,
          2.98,
          1.02
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "9e153efde9354c48fd0ad91a6e1f20d744318c5f38ed7a76052bbddb42faef26",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "WSON-10-EP(3x3)",
      "Category": "Power Management (PMIC)",
      "Pins": "11"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lm53601nqdsxrq1"
  ],
  "discovery_pitch": "LM53601NQDSXRQ1 (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm53601nqdsxrq1.kicad_sym",
    "lm53601nqdsxrq1.kicad_mod",
    "lm53601nqdsxrq1.glb",
    "lm53601nqdsxrq1.step",
    "lm53601nqdsxrq1.lbr",
    "docs/hero.png",
    "docs/lm53601nqdsxrq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm53601nqdsxrq1-hero.glb",
    "lm53601nqdsxrq1-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}