component
LM53601AQDSXTQ1
Public Made by Adomby adom
Texas Instruments DC-DC Converters, WSON-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 2h ago |
| viewers | 2h ago |
| lm53601aqdsxtq1-etched.glb | 2h ago |
| lm53601aqdsxtq1-etched.step | 2h ago |
| lm53601aqdsxtq1-hero.glb | 2h ago |
| lm53601aqdsxtq1-hero.overlay.json | 2h ago |
| lm53601aqdsxtq1.glb | 2h ago |
| lm53601aqdsxtq1.kicad_mod | 2h ago |
| lm53601aqdsxtq1.kicad_sym | 2h ago |
| lm53601aqdsxtq1.lbr | 2h ago |
| lm53601aqdsxtq1.step | 2h ago |
| package.json | 2h ago |
| page.json | 2h ago |
| README.md | 2h ago |
LM53601AQDSXTQ1
Texas Instruments · DC-DC Converters · WSON-10-EP(3x3)
LM53601AQDSXTQ1 from Texas Instruments, in a WSON-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Regulator switch node. Connect to output inductor. |
| 2 | BOOT | power_in | High side gate driver upper supply rail; connect 100-nF capacitor from SW to BOOT with internal diode charging capacitor while SW is low. |
| 3 | VCC | power_out | Internal 3-V regulator output used as supply to internal control circuits; connect high quality 1.0-μF capacitor from this pin to GND for adjustable versions. |
| 4 | FB | input | Feedback input for adjustable version only; connect to output through voltage divider which determines output voltage set point. |
| 5 | BIAS | power_in | Power source for VCC regulator in adjustable version; connect to output node and place 10-nF bypass capacitor immediately adjacent to this pin. |
| 6 | RESET | output | Open drain reset output; high indicates regulator OK, low indicates regulator fault; connect through current limiting pull up resistor to suitable voltage supply. |
| 7 | EN | input | Enable input to regulator; high enables operation, low disables; can be connected to VIN but do not float. |
| 8 | VIN | power_in | Input supply to regulator with range 3.8V to 36V after startup; connect input bypass capacitors directly between this pin and GND. |
| 9 | SYNC/MODE | input | Multifunction mode control input tolerant to input voltage; external clock synchronization or tied high selects forced PWM mode, tied low selects AUTO mode with diode emulation. |
| 10 | GND | power_in | Ground connection; bypass to VIN immediately adjacent to this pin. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-10-EP(3x3) |
| Category | Power Management (PMIC) |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
LM53601AQDSXTQ1 - Footprint:
Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.2x2mm - 3D model: WSON-10-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
lm53601aqdsxtq1-etched.step/lm53601aqdsxtq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm53601aqdsxtq1.step/lm53601aqdsxtq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (51 pp, sha256
d174c97c59a34282, retrieved 2026-10-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).