main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm536015qdsxrq1: viewers · Ray
lm536015qdsxrq1-etched.fit.json lm536015qdsxrq1: one-pass backfill (re-etched) · Ray
lm536015qdsxrq1-etched.glb lm536015qdsxrq1: one-pass backfill (re-etched) · Ray
lm536015qdsxrq1-etched.step lm536015qdsxrq1: one-pass backfill (re-etched) · Ray
lm536015qdsxrq1-hero.glb lm536015qdsxrq1: one-pass backfill (re-etched) · Ray
lm536015qdsxrq1-hero.overlay.json lm536015qdsxrq1: one-pass backfill (re-etched) · Ray
lm536015qdsxrq1.glb Publish 0.1.0 · Ray
lm536015qdsxrq1.kicad_mod Publish 0.1.0 · Ray
lm536015qdsxrq1.kicad_sym Publish 0.1.0 · Ray
lm536015qdsxrq1.lbr Publish 0.1.0 · Ray
lm536015qdsxrq1.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md lm536015qdsxrq1: specified limits as data (metadata.characteristics, 57 rows from the datasheet) · Ray

LM536015QDSXRQ1

Texas Instruments · DC-DC Converters · WSON-10-EP(3x3)

LM536015QDSXRQ1 from Texas Instruments, in a WSON-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Regulator switch node connecting to output inductor, switching between VIN and GND with maximum voltage VIN+0.3V and minimum -0.3V.
2 BOOT input High side gate driver supply rail; connect 100-nF capacitor from SW pin to BOOT with internal diode charging when SW is low; voltage range -0.3V to 3.6V vs SW.
3 VCC power_out Internal 3V regulator output for control circuits; connect 1.0-μF high-quality capacitor to AGND (fixed version); voltage range -0.3V to 3.6V.
4 FB input Output voltage feedback input for fixed 5V version serving as both feedback and power source for VCC regulator; connect to 5V output node with 10-nF bypass capacitor; voltage range -0.3V to 16V.
5 AGND power_in Ground reference for input signals and FB feedback in fixed versions; voltage offset from GND must not exceed ±1V for durations greater than 1µs.
6 RESET output Open-drain reset output with high indicating regulator OK and low on fault or when EN is low; maximum sink current 8mA; voltage range -0.3V to 8V.
7 EN input Enable input; high enables regulator operation, low disables; can connect to VIN but must not float; tolerant to 42V transient for ≤100ms at ≤1% duty cycle.
8 VIN power_in Input power supply; operating range 3.8V to 36V with 42V maximum transient voltage for ≤100ms at ≤1% duty cycle; connect bypass capacitors directly to GND.
9 SYNC/MODE input Mode control input tolerant to 42V transients; accepts external clock for PWM synchronization at rising edge or internal clock for forced PWM (tied high) or AUTO mode with diode emulation (tied low); must not float.
10 GND power_in Ground return and bypass reference for VIN; bypass capacitors must be connected immediately adjacent to this pin.
11 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-10-EP(3x3)
Category Power Management (PMIC)
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range after startup 3.8 36 V after startup 5
Output voltage range, 5 V option 0 5.5 V 5 V option 5
Load current range, LM53601-Q1 0 1000 mA LM53601-Q1 5
Operating junction temperature TJ -40 150 °C 5
VIN to GND VIN -0.3 42 V 5
SW to GND SW -0.3 V 5
BOOT to SW BOOT -0.3 3.6 V 5
EN to GND EN -0.3 42 V 5
FB to GND, 5.0 V fixed version FB -0.3 16 V LM53601-Q1 - 5.0 V 5
RESET to GND RESET -0.3 8 V 5
RESET sink current 8 mA 5
SYNC/MODE to GND SYNC/MODE -0.3 42 V 5
VCC VCC -0.3 3.6 V 5
GND to AGND (fixed version only) GND -1 2 V Fixed version only 5
Storage temperature Tstg -40 150 °C 5
Initial output voltage accuracy, Tj=25°C VFB -1 1 % Vin= 3.8 V to 36 V, Tj=25°C, Open Loop 6
Initial output voltage accuracy VFB -1.5 1.5 % Vin= 3.8 V to 36 V, Open Loop 6
Bias current into FB pin (fixed version) IB 46 80 µA Vin= 13.5 V, Not switching Vbias= 5 V, Mode = 0 V 6
Minimum input voltage to operate (rising) Vin_UVLO 3.2 3.6 3.75 V Rising 6
Minimum input voltage hysteresis Vin_UVLO_hyst 0.2 0.3 0.35 V Hysteresis 6
RESET upper threshold voltage Vreset_OV 105 106.5 110 % Rising, % of Vout 6
RESET lower threshold voltage Vreset_UV 92 94 97 % Falling, % Vout 6
Switching frequency, without spread spectrum, PWM Fsw 1.89 2.1 2.4 MHz VIN = 13.5 V, Without spread spectrum, PWM operation 7
Sync frequency range FSYNC 1.9 2.1 2.3 MHz Output setting + 1 V < VIN < 18 V 7
Sync input duty cycle range DSYNC 25 75 % High state input < 5.5 V and > 2.3 V 7
SYNC/MODE input hysteresis 0.185 1 V 7
High side switch current limit, LM53601-Q1 IL_HS 1.5 1.83 2.1 A Duty cycle approaches 0% 7
Low side switch current limit, LM53601-Q1 IL_LS 1 1.2 1.43 A 7
Enable input threshold voltage, rising VEN 1.7 2 V Enable rising 7
Enable threshold hysteresis VEN_HYST 0.4 0.55 V 7
RESET output Rdson RRESET 50 120 Ω 8
Thermal shutdown rising threshold TSD 151 167 185 °C 8
Thermal shutdown falling threshold TSDF 140 157 °C 8
Output voltage, 5 V option, max recommended load Vout_5V 4.9 5 5.1 V VIN = 5.8 V to 36 V, IOUT = Maximum recommended load current 8
Output voltage, 5 V option, 100 µA to 100 mA, Auto mode Vout_5V 4.9 5.05 5.125 V VIN = 5.5 V to 36 V, IOUT=100 µA to 100 mA, typical value in Auto Mode 8
Minimum switch on time ton 50 80.5 ns VIN = 18 V, IOUT = 500 mA 9
Minimum switch off time toff 90 125 ns IOUT = 500 mA 9
Delay time to RESET high signal treset_act 4 6 8 ms 9
Soft-start time tSS 1.3 3 4.5 ms Time from first SW node pulse to Vref at 90%, VIN ≥4.2 V 9
Quiescent current measured at VIN pin (Tj=25°C) IQ 6.5 µA Vin= 13.5 V, Not switching Vbias= 5 V 6
Quiescent current measured at VIN pin (Tj=85°C) IQ 16 µA Vin= 13.5 V, Not switching Vbias= 5 V, Tj= 85°C 6
Shutdown quiescent current (Tj=25°C) ISD 1.8 µA EN = 0, VIN = 13.5 V, Tj = 25°C 6
Shutdown quiescent current (Tj=85°C) ISD 3 µA EN = 0, VIN = 13.5 V, Tj = 85°C 6
Minimum input voltage for proper RESET function Vreset_valid 1.5 V 50 µA pull-up to RESET pin, EN = 0 V, Tj = 25°C 6
RESET threshold difference from steady-state output voltage Vreset_guard 3.9 % Steady state output voltage and RESET threshold read at the same TJ, and VIN 6
Low level RESET output voltage VOL 0.4 V 50 µA pull-up to RESET pin, Vin = 1.5 V, EN = 0 V, Tj = 25°C 6
Switching frequency, 36 V input, 5 V fixed output device Fsw 1.5 MHz VIN = 36 V, 5-V fixed output device 7
Enable pin input current IEN 2.7 µA VIN = VEN = 13.5 V 7
Negative current limit, LM53601-Q1 IL_NEG -0.7 A LM53601-Q1, MODE/SYNC = High 7
High side MOSFET Rdson Rdson 220 mΩ High side MOSFET 7
Low side MOSFET Rdson Rdson 200 mΩ Low side MOSFET 7
SYNC/MODE input high threshold VSYNC/MODE 1.5 V SYNC/MODE input high (MODE=FPWM) 7
SYNC/MODE input low threshold VSYNC/MODE 0.4 V SYNC/MODE input low (MODE = AUTO with diode emulation) 7
Junction-to-ambient thermal resistance RθJA 46.2 °C/W 6
Junction-to-case (top) thermal resistance RθJC 31.5 °C/W 6
Junction-to-board thermal resistance RθJB 20.9 °C/W 6
Junction-to-case (bottom) thermal resistance RθJC(bot) 4.1 °C/W 6

CAD (KiCad official)

  • Symbol: LM536015QDSXRQ1
  • Footprint: Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.2x2mm
  • 3D model: WSON-10-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: lm536015qdsxrq1-etched.step / lm536015qdsxrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm536015qdsxrq1.step / lm536015qdsxrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (51 pp, sha256 d174c97c59a34282, retrieved 2026-10-03, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF