Generated by kicad-footprint-generator · KiCad file format 20260206
LM5163DDAR
Texas Instruments · DC-DC Converters · ESOP-8
LM5163DDAR from Texas Instruments, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground connection for internal circuits. |
| 2 | VIN | power_in | Regulator supply input pin to high-side power MOSFET and internal bias regulator; input voltage range 6 V to 100 V. |
| 3 | EN/UVLO | input | Precision enable and undervoltage lockout pin; converter in shutdown mode below 1.1 V, standby mode from 1.1 V to 1.5 V, and normal operation above 1.5 V. |
| 4 | RON | input | On-time programming pin; external resistor to GND sets buck switch on-time inversely proportional to input voltage. |
| 5 | FB | input | Feedback input to voltage regulation comparator maintained at internal reference voltage of 1.2 V. |
| 6 | PGOOD | output | Open-drain power good indicator output requiring external pullup resistor of 10 kΩ to 100 kΩ to indicate output voltage regulation status. |
| 7 | BST | power_in | Bootstrap gate-drive supply pin for high-side gate driver requiring 2.2 nF 50 V X7R ceramic capacitor connected between BST and SW. |
| 8 | SW | power_out | Switching node internally connected to source of high-side NMOS buck switch and drain of low-side NMOS synchronous rectifier; externally connected to power inductor. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | ESOP-8 |
| Category | Power Management (PMIC) |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN to GND | -0.3 | 100 | V | 4 | |||
| EN to GND | -0.3 | 100 | V | 4 | |||
| FB to GND | -0.3 | 5.5 | V | 4 | |||
| RON to GND | -0.3 | 5.5 | V | 4 | |||
| External BST to SW capacitance | 1.5 | 2.5 | nF | 4 | |||
| BST to GND | -0.3 | 105.5 | V | 4 | |||
| BST to SW | -0.3 | 5.5 | V | 4 | |||
| SW to GND | -1.5 | 100 | V | 4 | |||
| SW to GND (20-ns transient) | -3 | V | 20-ns transient | 4 | |||
| PGOOD to GND | -0.3 | 14 | V | 4 | |||
| Operating junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| VIN input voltage | VIN | 6 | 100 | V | 4 | ||
| Switch node voltage | VSW | 100 | V | 4 | |||
| Enable voltage | VEN/UVLO | 100 | V | 4 | |||
| Load current | ILOAD | 0.5 | 0.6 | A | 4 | ||
| Switching frequency | FSW | 1000 | kHz | 4 | |||
| External BST to SW capacitance | CBST | 2.2 | nF | 4 | |||
| Programmable on-time | tON | 50 | 10000 | ns | 4 | ||
| VIN active current | IQ-ACTIVE | 600 | 880 | µA | VEN = 2.5 V | 5 | |
| VIN shutdown current | IQ-SHUTDOWN | 3 | 15 | µA | VEN = 0 V | 5 | |
| VIN sleep current | IQ-SLEEP1 | 10.5 | 25 | µA | VEN = 2.5 V, VFB = 1.5 V | 5 | |
| Enable threshold rising | VEN-RISING | 1.45 | 1.5 | 1.55 | V | VEN/UVLO rising | 5 |
| Enable threshold falling | VEN-FALLING | 1.35 | 1.4 | 1.44 | V | VEN/UVLO falling | 5 |
| FB regulation voltage | VREF | 1.181 | 1.2 | 1.218 | V | VFB falling | 5 |
| FB upper threshold for PGOOD high to low | VPG-UTH | 1.105 | 1.14 | 1.175 | V | VFB rising | 5 |
| FB lower threshold for PGOOD high to low | VPG-LTH | 1.055 | 1.08 | 1.1 | V | VFB falling | 5 |
| Gate drive UVLO | VBST-UV | 2.7 | 3.4 | V | VBST rising | 5 | |
| Internal soft-start time | tSS | 1.75 | 3 | 4.75 | ms | 6 | |
| Peak current limit threshold (HS) | IPEAK1 | 0.63 | 0.75 | 0.87 | A | 6 | |
| Peak current limit threshold (LS) | IPEAK2 | 0.63 | 0.75 | 0.87 | A | 6 | |
| Valley current limit threshold | IVALLEY | 0.5 | 0.6 | 0.72 | A | 6 | |
| Junction-to-ambient thermal resistance | RθJA | 43.4 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 59.5 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 16.1 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ΨJT | 4 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ΨJB | 16.3 | °C/W | 5 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 3.9 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
LM5163DDAR - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm5163ddar-etched.step/lm5163ddar-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5163ddar.step/lm5163ddar.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
4f75cb4abc02cdbe, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).