← Commit history

Initial commit: component/lm5163ddar

Ray ·c11ab43a30 ·
2 files changed +196
README.mdadded+46
@@ -0,0 +1,46 @@+# LM5163DDAR++**Texas Instruments** · DC-DC Converters · ESOP-8++LM5163DDAR from Texas Instruments, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Ground connection for internal circuits. |+| 2 | VIN | power_in | Regulator supply input pin to high-side power MOSFET and internal bias regulator; input voltage range 6 V to 100 V. |+| 3 | EN/UVLO | input | Precision enable and undervoltage lockout pin; converter in shutdown mode below 1.1 V, standby mode from 1.1 V to 1.5 V, and normal operation above 1.5 V. |+| 4 | RON | input | On-time programming pin; external resistor to GND sets buck switch on-time inversely proportional to input voltage. |+| 5 | FB | input | Feedback input to voltage regulation comparator maintained at internal reference voltage of 1.2 V. |+| 6 | PGOOD | output | Open-drain power good indicator output requiring external pullup resistor of 10 kΩ to 100 kΩ to indicate output voltage regulation status. |+| 7 | BST | power_in | Bootstrap gate-drive supply pin for high-side gate driver requiring 2.2 nF 50 V X7R ceramic capacitor connected between BST and SW. |+| 8 | SW | power_out | Switching node internally connected to source of high-side NMOS buck switch and drain of low-side NMOS synchronous rectifier; externally connected to power inductor. |+| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | ESOP-8 |+| Category | Power Management (PMIC) |+| Pins | 9 |++## CAD (KiCad official)++- Symbol: `LM5163DDAR`+- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm`+- 3D model: ESOP-8 (KiCad packages3D, STEP)+- 3D model files: `lm5163ddar-etched.step` / `lm5163ddar-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm5163ddar.step` / `lm5163ddar.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm5163) (39 pp, sha256 `4f75cb4abc02cdbe`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm5163ddar-datasheet.pdf)
page.jsonadded+150
@@ -0,0 +1,150 @@+{+  "slug": "lm5163ddar",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "lm5163ddar",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm5163ddar.kicad_sym",+    "lm5163ddar.kicad_mod",+    "lm5163ddar.glb",+    "lm5163ddar.step",+    "lm5163ddar.lbr",+    "docs/hero.png",+    "docs/lm5163ddar-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LM5163DDAR",+    "manufacturer": "Texas Instruments",+    "package": "ESOP-8",+    "pin_count": 9,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lm5163",+    "parts": {+      "symbol": "lm5163ddar.kicad_sym",+      "footprint": "lm5163ddar.kicad_mod",+      "model_3d": "lm5163ddar-etched.glb",+      "model_3d_plain": "lm5163ddar.glb",+      "model_3d_step": "lm5163ddar-etched.step",+      "model_3d_step_plain": "lm5163ddar.step",+      "lbr": "lm5163ddar.lbr"+    },+    "distributor_links": {+      "lcsc": "C2873264"+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Ground connection for internal circuits."+      },+      {+        "number": "2",+        "name": "VIN",+        "type": "power_in",+        "description": "Regulator supply input pin to high-side power MOSFET and internal bias regulator; input voltage range 6 V to 100 V."+      },+      {+        "number": "3",+        "name": "EN/UVLO",+        "type": "input",+        "description": "Precision enable and undervoltage lockout pin; converter in shutdown mode below 1.1 V, standby mode from 1.1 V to 1.5 V, and normal operation above 1.5 V."+      },+      {+        "number": "4",+        "name": "RON",+        "type": "input",+        "description": "On-time programming pin; external resistor to GND sets buck switch on-time inversely proportional to input voltage."+      },+      {+        "number": "5",+        "name": "FB",+        "type": "input",+        "description": "Feedback input to voltage regulation comparator maintained at internal reference voltage of 1.2 V."+      },+      {+        "number": "6",+        "name": "PGOOD",+        "type": "output",+        "description": "Open-drain power good indicator output requiring external pullup resistor of 10 kΩ to 100 kΩ to indicate output voltage regulation status."+      },+      {+        "number": "7",+        "name": "BST",+        "type": "power_in",+        "description": "Bootstrap gate-drive supply pin for high-side gate driver requiring 2.2 nF 50 V X7R ceramic capacitor connected between BST and SW."+      },+      {+        "number": "8",+        "name": "SW",+        "type": "power_out",+        "description": "Switching node internally connected to source of high-side NMOS buck switch and drain of low-side NMOS synchronous rectifier; externally connected to power inductor."+      },+      {+        "number": "9",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 9 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 39,+        "cost_usd": 0.3865,+        "at": "2026-09-23T10:17:59"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lm5163",+        "pages": 39,+        "sha256": "4f75cb4abc02cdbe",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 9,+        "described": 9,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file