main
History Download
Ray Initial commit: component/lm5160qpwpq1 9af78fa

LM5160QPWPQ1

Texas Instruments · DC-DC Converters · HTSSOP-14-EP

LM5160QPWPQ1 from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AGND power_in Analog ground connection for internal control circuits.
2 PGND power_in Power ground connection for internal synchronous rectifier FET.
3 VIN power_in Input supply connection with operating range of 4.5 V to 65 V.
4 EN/UVLO input Precision enable input with integrated undervoltage lockout (UVLO) comparator for input voltage monitoring.
5 RON input On-time programming input; external resistor to VIN sets switch on-time inversely proportional to input voltage.
6 SS input Soft-start input; connect external capacitor to AGND to control output rise time and limit startup overshoot.
7 NC unconnected No connection.
8 FPWM input Forced PWM logic input; connect to AGND for discontinuous conduction mode (DCM) at light loads or to VCC for continuous conduction mode (CCM) at all loads.
9 FB input Feedback input for internal voltage regulation comparator.
10 VCC power_out Internal high-voltage start-up regulator output, nominal 7.5 V, for internal circuits and gate drivers.
11 BST output Bootstrap capacitor connection; connect capacitor between BST and SW to bias gate driver of high-side buck MOSFET.
12 SW output Switch node; source connection of high-side buck MOSFET and drain connection of low-side synchronous rectifier MOSFET.
13 SW output Switch node; source connection of high-side buck MOSFET and drain connection of low-side synchronous rectifier MOSFET.
14 NC unconnected No connection.
15 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-14-EP
Category Power Management (PMIC)
Pins 15

CAD (KiCad official)

  • Symbol: LM5160QPWPQ1
  • Footprint: Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm
  • 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
  • 3D model files: lm5160qpwpq1-etched.step / lm5160qpwpq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm5160qpwpq1.step / lm5160qpwpq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 0ad03ac3b5621647, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF