← Commit history

Initial commit: component/lm5160qpwpq1

Ray ·9af78fa2e2 ·
2 files changed +239
README.mdadded+52
@@ -0,0 +1,52 @@+# LM5160QPWPQ1++**Texas Instruments** · DC-DC Converters · HTSSOP-14-EP++LM5160QPWPQ1 from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AGND | power_in | Analog ground connection for internal control circuits. |+| 2 | PGND | power_in | Power ground connection for internal synchronous rectifier FET. |+| 3 | VIN | power_in | Input supply connection with operating range of 4.5 V to 65 V. |+| 4 | EN/UVLO | input | Precision enable input with integrated undervoltage lockout (UVLO) comparator for input voltage monitoring. |+| 5 | RON | input | On-time programming input; external resistor to VIN sets switch on-time inversely proportional to input voltage. |+| 6 | SS | input | Soft-start input; connect external capacitor to AGND to control output rise time and limit startup overshoot. |+| 7 | NC | unconnected | No connection. |+| 8 | FPWM | input | Forced PWM logic input; connect to AGND for discontinuous conduction mode (DCM) at light loads or to VCC for continuous conduction mode (CCM) at all loads. |+| 9 | FB | input | Feedback input for internal voltage regulation comparator. |+| 10 | VCC | power_out | Internal high-voltage start-up regulator output, nominal 7.5 V, for internal circuits and gate drivers. |+| 11 | BST | output | Bootstrap capacitor connection; connect capacitor between BST and SW to bias gate driver of high-side buck MOSFET. |+| 12 | SW | output | Switch node; source connection of high-side buck MOSFET and drain connection of low-side synchronous rectifier MOSFET. |+| 13 | SW | output | Switch node; source connection of high-side buck MOSFET and drain connection of low-side synchronous rectifier MOSFET. |+| 14 | NC | unconnected | No connection. |+| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-14-EP |+| Category | Power Management (PMIC) |+| Pins | 15 |++## CAD (KiCad official)++- Symbol: `LM5160QPWPQ1`+- Footprint: `Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)+- 3D model files: `lm5160qpwpq1-etched.step` / `lm5160qpwpq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm5160qpwpq1.step` / `lm5160qpwpq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm5160-q1) (38 pp, sha256 `0ad03ac3b5621647`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm5160qpwpq1-datasheet.pdf)
page.jsonadded+187
@@ -0,0 +1,187 @@+{+  "slug": "lm5160qpwpq1",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "lm5160qpwpq1",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm5160qpwpq1.kicad_sym",+    "lm5160qpwpq1.kicad_mod",+    "lm5160qpwpq1.glb",+    "lm5160qpwpq1.step",+    "lm5160qpwpq1.lbr",+    "docs/hero.png",+    "docs/lm5160qpwpq1-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LM5160QPWPQ1",+    "manufacturer": "Texas Instruments",+    "package": "HTSSOP-14-EP",+    "pin_count": 15,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lm5160-q1",+    "parts": {+      "symbol": "lm5160qpwpq1.kicad_sym",+      "footprint": "lm5160qpwpq1.kicad_mod",+      "model_3d": "lm5160qpwpq1-etched.glb",+      "model_3d_plain": "lm5160qpwpq1.glb",+      "model_3d_step": "lm5160qpwpq1-etched.step",+      "model_3d_step_plain": "lm5160qpwpq1.step",+      "lbr": "lm5160qpwpq1.lbr"+    },+    "distributor_links": {+      "lcsc": "C2868362"+    },+    "pins": [+      {+        "number": "1",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground connection for internal control circuits."+      },+      {+        "number": "2",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground connection for internal synchronous rectifier FET."+      },+      {+        "number": "3",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply connection with operating range of 4.5 V to 65 V."+      },+      {+        "number": "4",+        "name": "EN/UVLO",+        "type": "input",+        "description": "Precision enable input with integrated undervoltage lockout (UVLO) comparator for input voltage monitoring."+      },+      {+        "number": "5",+        "name": "RON",+        "type": "input",+        "description": "On-time programming input; external resistor to VIN sets switch on-time inversely proportional to input voltage."+      },+      {+        "number": "6",+        "name": "SS",+        "type": "input",+        "description": "Soft-start input; connect external capacitor to AGND to control output rise time and limit startup overshoot."+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection."+      },+      {+        "number": "8",+        "name": "FPWM",+        "type": "input",+        "description": "Forced PWM logic input; connect to AGND for discontinuous conduction mode (DCM) at light loads or to VCC for continuous conduction mode (CCM) at all loads."+      },+      {+        "number": "9",+        "name": "FB",+        "type": "input",+        "description": "Feedback input for internal voltage regulation comparator."+      },+      {+        "number": "10",+        "name": "VCC",+        "type": "power_out",+        "description": "Internal high-voltage start-up regulator output, nominal 7.5 V, for internal circuits and gate drivers."+      },+      {+        "number": "11",+        "name": "BST",+        "type": "output",+        "description": "Bootstrap capacitor connection; connect capacitor between BST and SW to bias gate driver of high-side buck MOSFET."+      },+      {+        "number": "12",+        "name": "SW",+        "type": "output",+        "description": "Switch node; source connection of high-side buck MOSFET and drain connection of low-side synchronous rectifier MOSFET."+      },+      {+        "number": "13",+        "name": "SW",+        "type": "output",+        "description": "Switch node; source connection of high-side buck MOSFET and drain connection of low-side synchronous rectifier MOSFET."+      },+      {+        "number": "14",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection."+      },+      {+        "number": "15",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: BST and SW pins are actively driven power nodes with complex switching behavior; classification as '",+          "exposed pad 15 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 38,+        "cost_usd": 0.4488,+        "at": "2026-09-24T04:27:19"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lm5160-q1",+        "pages": 38,+        "sha256": "0ad03ac3b5621647",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 15,+        "described": 15,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file