main
Ray
Publish 0.1.0
65b023f
LM5156HQPWPRQ1
Texas Instruments · DC-DC Converters · HTSSOP-14
LM5156HQPWPRQ1 from Texas Instruments, in a HTSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BIAS | power_in | Supply voltage input to the VCC regulator; connect a bypass capacitor from this pin to PGND (absolute maximum 65 V). |
| 2 | NC | unconnected | No electrical contact. |
| 3 | VCC | power_out | Output of the internal VCC regulator and supply input of the MOSFET driver; connect a ceramic bypass capacitor from this pin to PGND. |
| 4 | GATE | output | N-channel MOSFET gate drive output; connect directly to the MOSFET gate through a short, low inductance path. |
| 5 | PGND | power_in | Power ground pin; connect directly to the ground connection of the sense resistor through a low inductance wide and short path. |
| 6 | AGND | power_in | Analog ground pin; connect directly to the analog ground plane through a wide and short path. |
| 7 | CS | input | Current sense input; connect to the positive side of the current sense resistor through a short path. |
| 8 | COMP | output | Output of the internal transconductance error amplifier; connect the loop compensation components between this pin and the ground plane. |
| 9 | DITHOFF | input | Spread spectrum selection pin; connecting to VCC disables internal spread spectrum, connecting to AGND enables it. |
| 10 | FB | input | Inverting input of the error amplifier; connect a voltage divider from the output to set output voltage, with the low-side resistor to AGND. |
| 11 | SS | input | Soft-start time programming pin; an external capacitor and internal current source set the reference ramp rate, with the capacitor ground connected to AGND. |
| 12 | RT | input | Switching frequency setting pin; frequency is programmed by a single resistor between RT and AGND. |
| 13 | PGOOD | output | Open-drain power-good indicator that goes low if FB is below the undervoltage threshold; connect a pullup resistor to the system rail, or leave floating if unused. |
| 14 | EN/UVLO/SYNC | input | Undervoltage lockout programming pin via a resistor divider from the supply, also accepts a negative pulse for external clock synchronization; must not be left floating, connect to BIAS if not used. |
| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-14 |
| Category | Power Supply Chip |
| Pins | 15 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| BIAS to AGND | -0.3 | 65 | V | 4 | |||
| UVLO to AGND | -0.3 | V | max = VBIAS+0.3 | 4 | |||
| SS to AGND | -0.3 | 3.8 | V | 4 | |||
| RT to AGND | -0.3 | 3.8 | V | 4 | |||
| FB to AGND | -0.3 | 4 | V | 4 | |||
| CS to AGND (DC) | -0.3 | 0.3 | V | 4 | |||
| CS to AGND (50ns transient) | -1 | V | 50ns transient | 4 | |||
| PGND to AGND | -0.3 | 0.3 | V | 4 | |||
| DITHOFF to AGND | -0.3 | 18 | V | 4 | |||
| VCC to AGND | -0.3 | 18 | V | 18 V or VBIAS + 0.3 V whichever is lower | 4 | ||
| GATE to AGND (50ns transient) | -1 | V | 50ns transient | 4 | |||
| PGOOD to AGND | -0.3 | 18 | V | 4 | |||
| COMP to AGND | -0.3 | V | 4 | ||||
| Junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | HBM, AEC Q100-002 | 4 | |
| ESD CDM all pins | V(ESD) | -500 | 500 | V | CDM, AEC Q100-011, all pins | 4 | |
| ESD CDM corner pins | V(ESD) | -750 | 750 | V | CDM, corner pins | 4 | |
| Bias input | VBIAS | 2.97 | 60 | V | 2.97 V to 16 V when VCC connected to BIAS; 3.5 V to 60 V with internal VCC regulator | 5 | |
| VCC voltage | VVCC | 2.97 | 16 | V | 5 | ||
| DITHOFF input | VDITHOFF | 0 | 16 | V | 5 | ||
| UVLO input | VUVLO | 0 | 60 | V | 5 | ||
| FB input | VFB | 0 | 4 | V | 5 | ||
| Typical switching frequency | fSW | 100 | 2200 | kHz | 5 | ||
| Synchronization pulse frequency | fSYNC | 100 | 2200 | kHz | 5 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 5 | ||
| Junction-to-ambient thermal resistance (LM5156HEVM-FLY) | RθJA | 54.7 | °C/W | PWP 14 pins, LM5156HEVM-FLY | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 44.1 | °C/W | PWP 14 pins | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 49.1 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 20.7 | °C/W | 5 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 7.9 | °C/W | 5 | |||
| BIAS shutdown current | ISHUTDOWN(BIAS) | 2.6 | 5 | µA | VBIAS = 12 V, VUVLO = 0 V | 5 | |
| BIAS operating current | IOPERATING(BIAS) | 490 | 580 | µA | VBIAS = 12 V, VUVLO = 2.0 V, VFB = VREF, RT = 220 kΩ | 5 | |
| VCC regulation | VVCC-REG | 6.5 | 6.85 | 7 | V | VBIAS = 8 V, No load | 5 |
| VCC regulation (loaded) | VVCC-REG | 6.5 | V | VBIAS = 8 V, IVCC = 35 mA | 5 | ||
| VCC UVLO threshold | VVCC-UVLO(RISING) | 2.75 | 2.85 | 2.95 | V | VCC rising | 5 |
| VCC UVLO hysteresis | 0.063 | V | VCC falling | 5 | |||
| VCC sourcing current limit | IVCC-CL | 35 | 110 | mA | VBIAS = 10 V, VVCC = 0 V | 5 | |
| Enable threshold rising | VEN(RISING) | 0.4 | 0.52 | 0.7 | V | EN rising | 5 |
| Enable threshold falling | VEN(FALLING) | 0.33 | 0.49 | 0.63 | V | EN falling | 6 |
| Enable hysteresis | VEN(HYS) | 0.03 | V | EN falling | 6 | ||
| UVLO/SYNC threshold rising | VUVLO(RISING) | 1.425 | 1.5 | 1.575 | V | UVLO rising | 6 |
| UVLO/SYNC threshold falling | VUVLO(FALLING) | 1.37 | 1.45 | 1.52 | V | UVLO falling | 6 |
| UVLO/SYNC threshold hysteresis | VUVLO(HYS) | 0.05 | V | UVLO falling | 6 | ||
| UVLO hysteresis current | IUVLO | 4 | 5 | 6 | µA | VUVLO = 1.6 V | 6 |
| Clock dithering threshold rising | VDITHOFF(RISING) | 1.1 | 1.7 | 2.1 | V | DITHOFF rising, VBIAS = 4 V | 6 |
| Clock dithering threshold falling | VDITHOFF(FALLING) | 0.6 | 1.2 | 1.8 | V | DITHOFF falling, VBIAS = 4 V | 6 |
| Clock dithering threshold hysteresis | VDITHOFF(HYS) | 0.5 | V | DITHOFF falling, VBIAS = 4 V | 6 | ||
| Soft-start current | ISS | 9 | 10 | 11 | µA | 6 | |
| SS pull-down switch rDS(on) | rDS(on) | 55 | Ω | 6 | |||
| Switching frequency 1 | fsw1 | 85 | 100 | 115 | kHz | RT = 220 kΩ, VBIAS = 4 V | 6 |
| Switching frequency 2 | fsw2 | 1980 | 2200 | 2420 | kHz | RT = 9.09 kΩ, VBIAS = 4 V | 6 |
| Minimum on-time | tON(MIN) | 50 | ns | RT = 9.09 kΩ | 6 | ||
| Maximum duty cycle limit 1 | DMAX1 | 80 | 85 | 90 | % | RT = 9.09 kΩ, VBIAS = 4 V | 6 |
| Maximum duty cycle limit 2 | DMAX2 | 90 | 93 | 96 | % | RT = 220 kΩ, VBIAS = 4 V | 6 |
| Peak slope compensation current | ISLOPE | 22.5 | 30 | 37.5 | µA | RT = 220 kΩ | 6 |
| Current Limit threshold (CS-PGND) | VCLTH | 93 | 100 | 107 | mV | 6 | |
| FB reference | VREF | 0.99 | 1 | 1.01 | V | 6 | |
| Transconductance | Gm | 2 | mA/V | 6 | |||
| COMP sourcing current | 180 | µA | VCOMP = 1.2V | 6 | |||
| COMP clamp voltage rising | 2.5 | 2.8 | V | COMP rising (VUVLO = 2.0 V) | 6 | ||
| COMP clamp voltage falling | 1 | 1.15 | V | COMP falling | 6 | ||
| Over-voltage threshold rising | VOVTH | 107 | 110 | 113 | % | FB rising (in reference to VREF) | 6 |
| Over-voltage threshold falling | VOVTH | 105 | % | FB falling (in reference to VREF) | 6 | ||
| PGOOD pull-down switch rDS(on) | rDS(on) | 90 | Ω | 1 mA sinking | 6 | ||
| Under-voltage threshold falling | VUVTH | 87 | 90 | 93 | % | FB falling (in reference to VREF) | 6 |
| Under-voltage threshold rising | VUVTH | 95 | % | FB rising (in reference to VREF) | 6 | ||
| MOSFET driver high-state voltage drop | 0.25 | V | 100 mA sinking | 6 | |||
| MOSFET driver low-state voltage drop | 0.15 | V | 100 mA sourcing | 6 | |||
| Thermal shutdown threshold | TTSD | 175 | °C | Temperature rising | 7 | ||
| Thermal shutdown hysteresis | 15 | °C | 7 |
CAD (KiCad official)
- Symbol:
LM5156HQPWPRQ1 - Footprint:
Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm - 3D model: HTSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
lm5156hqpwprq1-etched.step/lm5156hqpwprq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5156hqpwprq1.step/lm5156hqpwprq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (49 pp, sha256
d21a344bfaf35f47, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM5156HQPWPRQ1
**Texas Instruments** · DC-DC Converters · HTSSOP-14
LM5156HQPWPRQ1 from Texas Instruments, in a HTSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BIAS | power_in | Supply voltage input to the VCC regulator; connect a bypass capacitor from this pin to PGND (absolute maximum 65 V). |
| 2 | NC | unconnected | No electrical contact. |
| 3 | VCC | power_out | Output of the internal VCC regulator and supply input of the MOSFET driver; connect a ceramic bypass capacitor from this pin to PGND. |
| 4 | GATE | output | N-channel MOSFET gate drive output; connect directly to the MOSFET gate through a short, low inductance path. |
| 5 | PGND | power_in | Power ground pin; connect directly to the ground connection of the sense resistor through a low inductance wide and short path. |
| 6 | AGND | power_in | Analog ground pin; connect directly to the analog ground plane through a wide and short path. |
| 7 | CS | input | Current sense input; connect to the positive side of the current sense resistor through a short path. |
| 8 | COMP | output | Output of the internal transconductance error amplifier; connect the loop compensation components between this pin and the ground plane. |
| 9 | DITHOFF | input | Spread spectrum selection pin; connecting to VCC disables internal spread spectrum, connecting to AGND enables it. |
| 10 | FB | input | Inverting input of the error amplifier; connect a voltage divider from the output to set output voltage, with the low-side resistor to AGND. |
| 11 | SS | input | Soft-start time programming pin; an external capacitor and internal current source set the reference ramp rate, with the capacitor ground connected to AGND. |
| 12 | RT | input | Switching frequency setting pin; frequency is programmed by a single resistor between RT and AGND. |
| 13 | PGOOD | output | Open-drain power-good indicator that goes low if FB is below the undervoltage threshold; connect a pullup resistor to the system rail, or leave floating if unused. |
| 14 | EN/UVLO/SYNC | input | Undervoltage lockout programming pin via a resistor divider from the supply, also accepts a negative pulse for external clock synchronization; must not be left floating, connect to BIAS if not used. |
| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-14 |
| Category | Power Supply Chip |
| Pins | 15 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| BIAS to AGND | | -0.3 | | 65 | V | | 4 |
| UVLO to AGND | | -0.3 | | | V | max = VBIAS+0.3 | 4 |
| SS to AGND | | -0.3 | | 3.8 | V | | 4 |
| RT to AGND | | -0.3 | | 3.8 | V | | 4 |
| FB to AGND | | -0.3 | | 4 | V | | 4 |
| CS to AGND (DC) | | -0.3 | | 0.3 | V | | 4 |
| CS to AGND (50ns transient) | | -1 | | | V | 50ns transient | 4 |
| PGND to AGND | | -0.3 | | 0.3 | V | | 4 |
| DITHOFF to AGND | | -0.3 | | 18 | V | | 4 |
| VCC to AGND | | -0.3 | | 18 | V | 18 V or VBIAS + 0.3 V whichever is lower | 4 |
| GATE to AGND (50ns transient) | | -1 | | | V | 50ns transient | 4 |
| PGOOD to AGND | | -0.3 | | 18 | V | | 4 |
| COMP to AGND | | -0.3 | | | V | | 4 |
| Junction temperature | TJ | -40 | | 150 | °C | | 4 |
| Storage temperature | Tstg | -55 | | 150 | °C | | 4 |
| ESD HBM | V(ESD) | -2000 | | 2000 | V | HBM, AEC Q100-002 | 4 |
| ESD CDM all pins | V(ESD) | -500 | | 500 | V | CDM, AEC Q100-011, all pins | 4 |
| ESD CDM corner pins | V(ESD) | -750 | | 750 | V | CDM, corner pins | 4 |
| Bias input | VBIAS | 2.97 | | 60 | V | 2.97 V to 16 V when VCC connected to BIAS; 3.5 V to 60 V with internal VCC regulator | 5 |
| VCC voltage | VVCC | 2.97 | | 16 | V | | 5 |
| DITHOFF input | VDITHOFF | 0 | | 16 | V | | 5 |
| UVLO input | VUVLO | 0 | | 60 | V | | 5 |
| FB input | VFB | 0 | | 4 | V | | 5 |
| Typical switching frequency | fSW | 100 | | 2200 | kHz | | 5 |
| Synchronization pulse frequency | fSYNC | 100 | | 2200 | kHz | | 5 |
| Operating junction temperature | TJ | -40 | | 150 | °C | | 5 |
| Junction-to-ambient thermal resistance (LM5156HEVM-FLY) | RθJA | | 54.7 | | °C/W | PWP 14 pins, LM5156HEVM-FLY | 5 |
| Junction-to-ambient thermal resistance | RθJA | | 44.1 | | °C/W | PWP 14 pins | 5 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 49.1 | | °C/W | | 5 |
| Junction-to-board thermal resistance | RθJB | | 20.7 | | °C/W | | 5 |
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | | 7.9 | | °C/W | | 5 |
| BIAS shutdown current | ISHUTDOWN(BIAS) | | 2.6 | 5 | µA | VBIAS = 12 V, VUVLO = 0 V | 5 |
| BIAS operating current | IOPERATING(BIAS) | | 490 | 580 | µA | VBIAS = 12 V, VUVLO = 2.0 V, VFB = VREF, RT = 220 kΩ | 5 |
| VCC regulation | VVCC-REG | 6.5 | 6.85 | 7 | V | VBIAS = 8 V, No load | 5 |
| VCC regulation (loaded) | VVCC-REG | 6.5 | | | V | VBIAS = 8 V, IVCC = 35 mA | 5 |
| VCC UVLO threshold | VVCC-UVLO(RISING) | 2.75 | 2.85 | 2.95 | V | VCC rising | 5 |
| VCC UVLO hysteresis | | | 0.063 | | V | VCC falling | 5 |
| VCC sourcing current limit | IVCC-CL | 35 | 110 | | mA | VBIAS = 10 V, VVCC = 0 V | 5 |
| Enable threshold rising | VEN(RISING) | 0.4 | 0.52 | 0.7 | V | EN rising | 5 |
| Enable threshold falling | VEN(FALLING) | 0.33 | 0.49 | 0.63 | V | EN falling | 6 |
| Enable hysteresis | VEN(HYS) | | 0.03 | | V | EN falling | 6 |
| UVLO/SYNC threshold rising | VUVLO(RISING) | 1.425 | 1.5 | 1.575 | V | UVLO rising | 6 |
| UVLO/SYNC threshold falling | VUVLO(FALLING) | 1.37 | 1.45 | 1.52 | V | UVLO falling | 6 |
| UVLO/SYNC threshold hysteresis | VUVLO(HYS) | | 0.05 | | V | UVLO falling | 6 |
| UVLO hysteresis current | IUVLO | 4 | 5 | 6 | µA | VUVLO = 1.6 V | 6 |
| Clock dithering threshold rising | VDITHOFF(RISING) | 1.1 | 1.7 | 2.1 | V | DITHOFF rising, VBIAS = 4 V | 6 |
| Clock dithering threshold falling | VDITHOFF(FALLING) | 0.6 | 1.2 | 1.8 | V | DITHOFF falling, VBIAS = 4 V | 6 |
| Clock dithering threshold hysteresis | VDITHOFF(HYS) | | 0.5 | | V | DITHOFF falling, VBIAS = 4 V | 6 |
| Soft-start current | ISS | 9 | 10 | 11 | µA | | 6 |
| SS pull-down switch rDS(on) | rDS(on) | | 55 | | Ω | | 6 |
| Switching frequency 1 | fsw1 | 85 | 100 | 115 | kHz | RT = 220 kΩ, VBIAS = 4 V | 6 |
| Switching frequency 2 | fsw2 | 1980 | 2200 | 2420 | kHz | RT = 9.09 kΩ, VBIAS = 4 V | 6 |
| Minimum on-time | tON(MIN) | | 50 | | ns | RT = 9.09 kΩ | 6 |
| Maximum duty cycle limit 1 | DMAX1 | 80 | 85 | 90 | % | RT = 9.09 kΩ, VBIAS = 4 V | 6 |
| Maximum duty cycle limit 2 | DMAX2 | 90 | 93 | 96 | % | RT = 220 kΩ, VBIAS = 4 V | 6 |
| Peak slope compensation current | ISLOPE | 22.5 | 30 | 37.5 | µA | RT = 220 kΩ | 6 |
| Current Limit threshold (CS-PGND) | VCLTH | 93 | 100 | 107 | mV | | 6 |
| FB reference | VREF | 0.99 | 1 | 1.01 | V | | 6 |
| Transconductance | Gm | | 2 | | mA/V | | 6 |
| COMP sourcing current | | | 180 | | µA | VCOMP = 1.2V | 6 |
| COMP clamp voltage rising | | 2.5 | | 2.8 | V | COMP rising (VUVLO = 2.0 V) | 6 |
| COMP clamp voltage falling | | | 1 | 1.15 | V | COMP falling | 6 |
| Over-voltage threshold rising | VOVTH | 107 | 110 | 113 | % | FB rising (in reference to VREF) | 6 |
| Over-voltage threshold falling | VOVTH | | 105 | | % | FB falling (in reference to VREF) | 6 |
| PGOOD pull-down switch rDS(on) | rDS(on) | | | 90 | Ω | 1 mA sinking | 6 |
| Under-voltage threshold falling | VUVTH | 87 | 90 | 93 | % | FB falling (in reference to VREF) | 6 |
| Under-voltage threshold rising | VUVTH | | 95 | | % | FB rising (in reference to VREF) | 6 |
| MOSFET driver high-state voltage drop | | | | 0.25 | V | 100 mA sinking | 6 |
| MOSFET driver low-state voltage drop | | | | 0.15 | V | 100 mA sourcing | 6 |
| Thermal shutdown threshold | TTSD | | 175 | | °C | Temperature rising | 7 |
| Thermal shutdown hysteresis | | | 15 | | °C | | 7 |
## CAD (KiCad official)
- Symbol: `LM5156HQPWPRQ1`
- Footprint: `Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm`
- 3D model: HTSSOP-14 (KiCad packages3D, STEP)
- 3D model files: `lm5156hqpwprq1-etched.step` / `lm5156hqpwprq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm5156hqpwprq1.step` / `lm5156hqpwprq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm5156h-q1) (49 pp, sha256 `d21a344bfaf35f47`, retrieved 2026-10-27, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm5156hqpwprq1-datasheet.pdf)