main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm5156hqpwprq1: viewers · Ray
lm5156hqpwprq1-etched.glb Publish 0.1.0 · Ray
lm5156hqpwprq1-etched.step lm5156hqpwprq1: factory component page (tier=lcsc) · Ray
lm5156hqpwprq1-hero.glb lm5156hqpwprq1: hero GLB from the etched model (keeps the MPN mark) · Ray
lm5156hqpwprq1-hero.overlay.json Publish 0.1.0 · Ray
lm5156hqpwprq1.glb Publish 0.1.0 · Ray
lm5156hqpwprq1.kicad_mod Publish 0.1.0 · Ray
lm5156hqpwprq1.kicad_sym Publish 0.1.0 · Ray
lm5156hqpwprq1.lbr Publish 0.1.0 · Ray
lm5156hqpwprq1.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

LM5156HQPWPRQ1

Texas Instruments · DC-DC Converters · HTSSOP-14

LM5156HQPWPRQ1 from Texas Instruments, in a HTSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BIAS power_in Supply voltage input to the VCC regulator; connect a bypass capacitor from this pin to PGND (absolute maximum 65 V).
2 NC unconnected No electrical contact.
3 VCC power_out Output of the internal VCC regulator and supply input of the MOSFET driver; connect a ceramic bypass capacitor from this pin to PGND.
4 GATE output N-channel MOSFET gate drive output; connect directly to the MOSFET gate through a short, low inductance path.
5 PGND power_in Power ground pin; connect directly to the ground connection of the sense resistor through a low inductance wide and short path.
6 AGND power_in Analog ground pin; connect directly to the analog ground plane through a wide and short path.
7 CS input Current sense input; connect to the positive side of the current sense resistor through a short path.
8 COMP output Output of the internal transconductance error amplifier; connect the loop compensation components between this pin and the ground plane.
9 DITHOFF input Spread spectrum selection pin; connecting to VCC disables internal spread spectrum, connecting to AGND enables it.
10 FB input Inverting input of the error amplifier; connect a voltage divider from the output to set output voltage, with the low-side resistor to AGND.
11 SS input Soft-start time programming pin; an external capacitor and internal current source set the reference ramp rate, with the capacitor ground connected to AGND.
12 RT input Switching frequency setting pin; frequency is programmed by a single resistor between RT and AGND.
13 PGOOD output Open-drain power-good indicator that goes low if FB is below the undervoltage threshold; connect a pullup resistor to the system rail, or leave floating if unused.
14 EN/UVLO/SYNC input Undervoltage lockout programming pin via a resistor divider from the supply, also accepts a negative pulse for external clock synchronization; must not be left floating, connect to BIAS if not used.
15 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-14
Category Power Supply Chip
Pins 15

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
BIAS to AGND -0.3 65 V 4
UVLO to AGND -0.3 V max = VBIAS+0.3 4
SS to AGND -0.3 3.8 V 4
RT to AGND -0.3 3.8 V 4
FB to AGND -0.3 4 V 4
CS to AGND (DC) -0.3 0.3 V 4
CS to AGND (50ns transient) -1 V 50ns transient 4
PGND to AGND -0.3 0.3 V 4
DITHOFF to AGND -0.3 18 V 4
VCC to AGND -0.3 18 V 18 V or VBIAS + 0.3 V whichever is lower 4
GATE to AGND (50ns transient) -1 V 50ns transient 4
PGOOD to AGND -0.3 18 V 4
COMP to AGND -0.3 V 4
Junction temperature TJ -40 150 °C 4
Storage temperature Tstg -55 150 °C 4
ESD HBM V(ESD) -2000 2000 V HBM, AEC Q100-002 4
ESD CDM all pins V(ESD) -500 500 V CDM, AEC Q100-011, all pins 4
ESD CDM corner pins V(ESD) -750 750 V CDM, corner pins 4
Bias input VBIAS 2.97 60 V 2.97 V to 16 V when VCC connected to BIAS; 3.5 V to 60 V with internal VCC regulator 5
VCC voltage VVCC 2.97 16 V 5
DITHOFF input VDITHOFF 0 16 V 5
UVLO input VUVLO 0 60 V 5
FB input VFB 0 4 V 5
Typical switching frequency fSW 100 2200 kHz 5
Synchronization pulse frequency fSYNC 100 2200 kHz 5
Operating junction temperature TJ -40 150 °C 5
Junction-to-ambient thermal resistance (LM5156HEVM-FLY) RθJA 54.7 °C/W PWP 14 pins, LM5156HEVM-FLY 5
Junction-to-ambient thermal resistance RθJA 44.1 °C/W PWP 14 pins 5
Junction-to-case (top) thermal resistance RθJC(top) 49.1 °C/W 5
Junction-to-board thermal resistance RθJB 20.7 °C/W 5
Junction-to-case (bottom) thermal resistance RθJC(bot) 7.9 °C/W 5
BIAS shutdown current ISHUTDOWN(BIAS) 2.6 5 µA VBIAS = 12 V, VUVLO = 0 V 5
BIAS operating current IOPERATING(BIAS) 490 580 µA VBIAS = 12 V, VUVLO = 2.0 V, VFB = VREF, RT = 220 kΩ 5
VCC regulation VVCC-REG 6.5 6.85 7 V VBIAS = 8 V, No load 5
VCC regulation (loaded) VVCC-REG 6.5 V VBIAS = 8 V, IVCC = 35 mA 5
VCC UVLO threshold VVCC-UVLO(RISING) 2.75 2.85 2.95 V VCC rising 5
VCC UVLO hysteresis 0.063 V VCC falling 5
VCC sourcing current limit IVCC-CL 35 110 mA VBIAS = 10 V, VVCC = 0 V 5
Enable threshold rising VEN(RISING) 0.4 0.52 0.7 V EN rising 5
Enable threshold falling VEN(FALLING) 0.33 0.49 0.63 V EN falling 6
Enable hysteresis VEN(HYS) 0.03 V EN falling 6
UVLO/SYNC threshold rising VUVLO(RISING) 1.425 1.5 1.575 V UVLO rising 6
UVLO/SYNC threshold falling VUVLO(FALLING) 1.37 1.45 1.52 V UVLO falling 6
UVLO/SYNC threshold hysteresis VUVLO(HYS) 0.05 V UVLO falling 6
UVLO hysteresis current IUVLO 4 5 6 µA VUVLO = 1.6 V 6
Clock dithering threshold rising VDITHOFF(RISING) 1.1 1.7 2.1 V DITHOFF rising, VBIAS = 4 V 6
Clock dithering threshold falling VDITHOFF(FALLING) 0.6 1.2 1.8 V DITHOFF falling, VBIAS = 4 V 6
Clock dithering threshold hysteresis VDITHOFF(HYS) 0.5 V DITHOFF falling, VBIAS = 4 V 6
Soft-start current ISS 9 10 11 µA 6
SS pull-down switch rDS(on) rDS(on) 55 Ω 6
Switching frequency 1 fsw1 85 100 115 kHz RT = 220 kΩ, VBIAS = 4 V 6
Switching frequency 2 fsw2 1980 2200 2420 kHz RT = 9.09 kΩ, VBIAS = 4 V 6
Minimum on-time tON(MIN) 50 ns RT = 9.09 kΩ 6
Maximum duty cycle limit 1 DMAX1 80 85 90 % RT = 9.09 kΩ, VBIAS = 4 V 6
Maximum duty cycle limit 2 DMAX2 90 93 96 % RT = 220 kΩ, VBIAS = 4 V 6
Peak slope compensation current ISLOPE 22.5 30 37.5 µA RT = 220 kΩ 6
Current Limit threshold (CS-PGND) VCLTH 93 100 107 mV 6
FB reference VREF 0.99 1 1.01 V 6
Transconductance Gm 2 mA/V 6
COMP sourcing current 180 µA VCOMP = 1.2V 6
COMP clamp voltage rising 2.5 2.8 V COMP rising (VUVLO = 2.0 V) 6
COMP clamp voltage falling 1 1.15 V COMP falling 6
Over-voltage threshold rising VOVTH 107 110 113 % FB rising (in reference to VREF) 6
Over-voltage threshold falling VOVTH 105 % FB falling (in reference to VREF) 6
PGOOD pull-down switch rDS(on) rDS(on) 90 Ω 1 mA sinking 6
Under-voltage threshold falling VUVTH 87 90 93 % FB falling (in reference to VREF) 6
Under-voltage threshold rising VUVTH 95 % FB rising (in reference to VREF) 6
MOSFET driver high-state voltage drop 0.25 V 100 mA sinking 6
MOSFET driver low-state voltage drop 0.15 V 100 mA sourcing 6
Thermal shutdown threshold TTSD 175 °C Temperature rising 7
Thermal shutdown hysteresis 15 °C 7

CAD (KiCad official)

  • Symbol: LM5156HQPWPRQ1
  • Footprint: Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm
  • 3D model: HTSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: lm5156hqpwprq1-etched.step / lm5156hqpwprq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm5156hqpwprq1.step / lm5156hqpwprq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (49 pp, sha256 d21a344bfaf35f47, retrieved 2026-10-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF