main
Ray Publish 0.1.1 2076283
{
  "slug": "lm5122qmhx",
  "version": "0.1.1",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, TSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "lm5122qmhx",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm5122qmhx.kicad_sym",
    "lm5122qmhx.kicad_mod",
    "lm5122qmhx.glb",
    "lm5122qmhx.step",
    "lm5122qmhx.lbr",
    "docs/hero.png",
    "docs/lm5122qmhx-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm5122qmhx-etched.step",
    "lm5122qmhx-hero.glb",
    "lm5122qmhx-hero.overlay.json"
  ],
  "component": {
    "mpn": "LM5122QMHX",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-20-EP",
    "pin_count": 21,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm5122-q1",
    "parts": {
      "symbol": "lm5122qmhx.kicad_sym",
      "footprint": "lm5122qmhx.kicad_mod",
      "model_3d": "lm5122qmhx-hero.glb",
      "model_3d_plain": "lm5122qmhx.glb",
      "model_3d_step": "lm5122qmhx-etched.step",
      "model_3d_step_plain": "lm5122qmhx.step",
      "lbr": "lm5122qmhx.lbr"
    },
    "distributor_links": {
      "lcsc": "C527477"
    },
    "distributor_check": {
      "checked_at": "2026-10-01T17:12:16Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SYNCOUT",
        "type": "output",
        "description": "Clock output providing 180° phase shift for multiphase operation that may be left floating when unused."
      },
      {
        "number": "2",
        "name": "OPT",
        "type": "input",
        "description": "Clock synchronization selection pin controlling master/slave configuration, must not be left floating."
      },
      {
        "number": "3",
        "name": "CSN",
        "type": "input",
        "description": "Inverting input of current sense amplifier connected to the negative side of the sense resistor."
      },
      {
        "number": "4",
        "name": "CSP",
        "type": "input",
        "description": "Non-inverting input of current sense amplifier connected to the positive side of the sense resistor."
      },
      {
        "number": "5",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply voltage input to internal VCC regulator accepting input voltages from 4.5V to 65V."
      },
      {
        "number": "6",
        "name": "UVLO",
        "type": "input",
        "description": "Undervoltage lockout programming pin with shutdown (below 0.4V), standby (0.4V to 1.2V), and startup (above 1.2V) threshold modes."
      },
      {
        "number": "7",
        "name": "SS",
        "type": "input",
        "description": "Soft-start programming pin with internal 10-μA current source controlling output voltage ramp rate during startup."
      },
      {
        "number": "8",
        "name": "SYNCIN/RT",
        "type": "input",
        "description": "Oscillator synchronization input and timing resistor pin for frequency programming and external clock synchronization up to 2 MHz."
      },
      {
        "number": "9",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground connection providing return path for internal voltage reference and analog circuits."
      },
      {
        "number": "10",
        "name": "FB",
        "type": "input",
        "description": "Feedback inverting input with 1.2V regulation threshold; sets output voltage via external resistor divider and enables slave mode if above 2.7V at power-on."
      },
      {
        "number": "11",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier output node for connection of Type 2 compensation network to feedback pin."
      },
      {
        "number": "12",
        "name": "SLOPE",
        "type": "input",
        "description": "Slope compensation programming pin with amplitude set by external resistor to AGND for prevention of sub-harmonic oscillation."
      },
      {
        "number": "13",
        "name": "MODE",
        "type": "input",
        "description": "Switching mode selection with internal pullup/pulldown resistors that enable forced PWM mode (above 1.2V) or diode-emulation mode (below 1.2V)."
      },
      {
        "number": "14",
        "name": "RES",
        "type": "output",
        "description": "Restart timer pin with external capacitor for hiccup-mode off-time and restart delay programming during overload conditions."
      },
      {
        "number": "15",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground connection pin for low-side gate driver that must connect directly to the low-side MOSFET source terminal."
      },
      {
        "number": "16",
        "name": "LO",
        "type": "output",
        "description": "Low-side N-channel MOSFET gate driver output with 3A peak source/sink current capability requiring short low-inductance connection to gate."
      },
      {
        "number": "17",
        "name": "VCC",
        "type": "power_in",
        "description": "Bias supply output from internal 7.6V regulator powering controller and drivers, decouple to PGND with low-ESR ceramic capacitor."
      },
      {
        "number": "18",
        "name": "SW",
        "type": "bidirectional",
        "description": "Boost converter switching node connecting bootstrap capacitor and both MOSFET switches via short low-inductance paths for noise minimization."
      },
      {
        "number": "19",
        "name": "HO",
        "type": "output",
        "description": "High-side N-channel MOSFET gate driver output with 3.2A peak source/sink current at 7.6V requiring short low-inductance connection to gate."
      },
      {
        "number": "20",
        "name": "BST",
        "type": "power_in",
        "description": "Bootstrap gate-drive supply pin charged by internal 200-μA pump that maintains high-side driver supply for 100% duty-cycle bypass operation."
      },
      {
        "number": "21",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 50,
        "cost_usd": 0.4014,
        "at": "2026-10-01T17:11:53"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm5122-q1",
        "pages": 50,
        "sha256": "89895d7bdb8309ba",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm5122qmhx.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.41,
          6.5,
          1.2
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "02d57259016aedd04138cffece0cfd0bc269c9cf2320ef7c013951b3581607c0",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm5122qmhx-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.41,
          6.5,
          1.2
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c66bd9144fd373ae148d2a7796252767ab721b46198fca619ab3c1154017172b",
        "checked": "2026-10-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "title": "LM5122QMHX",
  "brief": "Texas Instruments DC-DC Converters, TSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TSSOP-20-EP",
      "Category": "Power Management (PMIC)",
      "Pins": "21"
    }
  },
  "discovery_triggers": [
    "lm5122qmhx"
  ],
  "discovery_pitch": "LM5122QMHX (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "visibility": "public"
}