main
Ray
Publish 0.1.0
af67a38
LM5106SDX
Texas Instruments · Gate Drive ICs · WSON-10-EP(4x4)
LM5106SDX from Texas Instruments, in a WSON-10-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive gate drive supply; decouple VDD to VSS with a low ESR/ESL capacitor placed as close to the IC as possible. |
| 2 | HB | power_in | High-side gate driver bootstrap rail; connect the positive terminal of the bootstrap capacitor to HB and its negative terminal to HS, placed as close to the IC as possible. |
| 3 | HO | output | High-side gate driver output; connect to the gate of the high-side N-MOS device through a short, low inductance path. |
| 4 | HS | power_in | High-side MOSFET source; connect to the negative terminal of the bootstrap capacitor and to the source of the high-side N-MOS device. |
| 5 | NC | unconnected | Not connected. |
| 6 | RDT | passive | Dead-time programming pin; a resistor from RDT to VSS programs the turnon delay of both the high- and low-side MOSFETs and should be placed close to the IC. |
| 7 | EN | input | Logic input for driver enable/disable with TTL compatible threshold and hysteresis; LO and HO are held in the low state when EN is low. |
| 8 | IN | input | Logic input for gate driver with TTL compatible threshold and hysteresis; the high-side MOSFET turns on and the low-side MOSFET turns off when IN is high. |
| 9 | VSS | power_in | Ground return; all signals are referenced to this ground. |
| 10 | LO | output | Low-side gate driver output; connect to the gate of the low-side N-MOS device with a short, low inductance path. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-10-EP(4x4) |
| Category | Power Supply Chip |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD to VSS voltage | -0.3 | 18 | V | 4 | |||
| HB to HS voltage | -0.3 | 18 | V | 4 | |||
| RDT to VSS voltage | -0.3 | 5 | V | 4 | |||
| HS to VSS voltage | 100 | V | 4 | ||||
| HB to VSS voltage | 118 | V | 4 | ||||
| Junction temperature | 150 | °C | 4 | ||||
| Storage temperature range | Tstg | -55 | 150 | °C | 4 | ||
| VDD supply voltage | VDD | 8 | 14 | V | 4 | ||
| HS voltage | HS | -1 | 100 | V | 4 | ||
| HS slew rate | 50 | V/ns | 4 | ||||
| Junction temperature operating | -40 | 125 | °C | 4 | |||
| VDD Quiescent Current | IDD | 0.34 | 0.6 | mA | IN = EN = 0 V | 5 | |
| VDD Operating Current | IDDO | 2.1 | 3.5 | mA | f = 500 kHz | 5 | |
| Total HB Quiescent Current | IHB | 0.06 | 0.2 | mA | IN = EN = 0 V | 5 | |
| Total HB Operating Current | IHBO | 1.5 | 3 | mA | f = 500 kHz | 5 | |
| HB to VSS Current, Quiescent | IHBS | 0.1 | 10 | µA | HS = HB = 100 V | 5 | |
| Low Level Input Voltage Threshold | VIL | 0.8 | 1.8 | V | 5 | ||
| High Level Input Voltage Threshold | VIH | 1.8 | 2.2 | V | 5 | ||
| Input Pulldown Resistance | Rpd | 100 | 200 | 500 | kΩ | Pin IN and EN | 5 |
| Nominal Voltage at RDT | VRDT | 2.7 | 3 | 3.3 | V | 5 | |
| RDT Pin Current Limit | IRDT | 0.75 | 1.5 | 2.25 | mA | RDT = 0 V | 5 |
| VDD Rising Threshold | VDDR | 6.2 | 6.9 | 7.6 | V | 5 | |
| HB Rising Threshold | VHBR | 5.9 | 6.6 | 7.3 | V | 5 | |
| Low-Level Output Voltage LO | VOLL | 0.21 | 0.4 | V | ILO = 100 mA | 5 | |
| High-Level Output Voltage LO | VOHL | 0.5 | 0.85 | V | ILO = -100 mA, VOHL = VDD, VLO | 5 | |
| Low-Level Output Voltage HO | VOLH | 0.21 | 0.4 | V | IHO = 100 mA | 5 | |
| High-Level Output Voltage HO | VOHH | 0.5 | 0.85 | V | IHO = -100 mA, VOHH = HB, HO | 5 | |
| Junction to Ambient thermal resistance | θJA | 40 | °C/W | See(2)(3) | 6 | ||
| Lower Turn-Off Propagation Delay | tLPHL | 32 | 32 | 56 | ns | 6 | |
| Upper Turn-Off Propagation Delay | tHPHL | 32 | 32 | 56 | ns | 6 | |
| Lower Turn-On Propagation Delay | tLPLH | 400 | 520 | 640 | ns | RDT = 100k | 6 |
| Upper Turn-On Propagation Delay | tHPLH | 450 | 570 | 690 | ns | RDT = 100k | 6 |
| Lower Turn-On Propagation Delay | tLPLH | 85 | 115 | 160 | ns | RDT = 10k | 6 |
| Upper Turn-On Propagation Delay | tHPLH | 85 | 115 | 160 | ns | RDT = 10k | 6 |
| Junction to Ambient thermal resistance (DPR) | RθJA | 37.9 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance (DPR) | RθJC(top) | 38.1 | °C/W | 5 | |||
| Junction-to-board thermal resistance (DPR) | RθJB | 14.9 | °C/W | 5 | |||
| Junction-to-case (bottom) thermal resistance (DPR) | RθJC(bot) | 4.4 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
LM5106SDX - Footprint:
Package_SON:WSON-10-1EP_4x4mm_P0.8mm_EP2.6x3mm - 3D model: WSON-10-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
lm5106sdx-etched.step/lm5106sdx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5106sdx.step/lm5106sdx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
1e623b370d6f5134, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM5106SDX
**Texas Instruments** · Gate Drive ICs · WSON-10-EP(4x4)
LM5106SDX from Texas Instruments, in a WSON-10-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive gate drive supply; decouple VDD to VSS with a low ESR/ESL capacitor placed as close to the IC as possible. |
| 2 | HB | power_in | High-side gate driver bootstrap rail; connect the positive terminal of the bootstrap capacitor to HB and its negative terminal to HS, placed as close to the IC as possible. |
| 3 | HO | output | High-side gate driver output; connect to the gate of the high-side N-MOS device through a short, low inductance path. |
| 4 | HS | power_in | High-side MOSFET source; connect to the negative terminal of the bootstrap capacitor and to the source of the high-side N-MOS device. |
| 5 | NC | unconnected | Not connected. |
| 6 | RDT | passive | Dead-time programming pin; a resistor from RDT to VSS programs the turnon delay of both the high- and low-side MOSFETs and should be placed close to the IC. |
| 7 | EN | input | Logic input for driver enable/disable with TTL compatible threshold and hysteresis; LO and HO are held in the low state when EN is low. |
| 8 | IN | input | Logic input for gate driver with TTL compatible threshold and hysteresis; the high-side MOSFET turns on and the low-side MOSFET turns off when IN is high. |
| 9 | VSS | power_in | Ground return; all signals are referenced to this ground. |
| 10 | LO | output | Low-side gate driver output; connect to the gate of the low-side N-MOS device with a short, low inductance path. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-10-EP(4x4) |
| Category | Power Supply Chip |
| Pins | 11 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD to VSS voltage | | -0.3 | | 18 | V | | 4 |
| HB to HS voltage | | -0.3 | | 18 | V | | 4 |
| RDT to VSS voltage | | -0.3 | | 5 | V | | 4 |
| HS to VSS voltage | | | | 100 | V | | 4 |
| HB to VSS voltage | | | | 118 | V | | 4 |
| Junction temperature | | | | 150 | °C | | 4 |
| Storage temperature range | Tstg | -55 | | 150 | °C | | 4 |
| VDD supply voltage | VDD | 8 | | 14 | V | | 4 |
| HS voltage | HS | -1 | | 100 | V | | 4 |
| HS slew rate | | | | 50 | V/ns | | 4 |
| Junction temperature operating | | -40 | | 125 | °C | | 4 |
| VDD Quiescent Current | IDD | | 0.34 | 0.6 | mA | IN = EN = 0 V | 5 |
| VDD Operating Current | IDDO | | 2.1 | 3.5 | mA | f = 500 kHz | 5 |
| Total HB Quiescent Current | IHB | | 0.06 | 0.2 | mA | IN = EN = 0 V | 5 |
| Total HB Operating Current | IHBO | | 1.5 | 3 | mA | f = 500 kHz | 5 |
| HB to VSS Current, Quiescent | IHBS | | 0.1 | 10 | µA | HS = HB = 100 V | 5 |
| Low Level Input Voltage Threshold | VIL | 0.8 | | 1.8 | V | | 5 |
| High Level Input Voltage Threshold | VIH | 1.8 | | 2.2 | V | | 5 |
| Input Pulldown Resistance | Rpd | 100 | 200 | 500 | kΩ | Pin IN and EN | 5 |
| Nominal Voltage at RDT | VRDT | 2.7 | 3 | 3.3 | V | | 5 |
| RDT Pin Current Limit | IRDT | 0.75 | 1.5 | 2.25 | mA | RDT = 0 V | 5 |
| VDD Rising Threshold | VDDR | 6.2 | 6.9 | 7.6 | V | | 5 |
| HB Rising Threshold | VHBR | 5.9 | 6.6 | 7.3 | V | | 5 |
| Low-Level Output Voltage LO | VOLL | | 0.21 | 0.4 | V | ILO = 100 mA | 5 |
| High-Level Output Voltage LO | VOHL | | 0.5 | 0.85 | V | ILO = -100 mA, VOHL = VDD, VLO | 5 |
| Low-Level Output Voltage HO | VOLH | | 0.21 | 0.4 | V | IHO = 100 mA | 5 |
| High-Level Output Voltage HO | VOHH | | 0.5 | 0.85 | V | IHO = -100 mA, VOHH = HB, HO | 5 |
| Junction to Ambient thermal resistance | θJA | | 40 | | °C/W | See(2)(3) | 6 |
| Lower Turn-Off Propagation Delay | tLPHL | 32 | 32 | 56 | ns | | 6 |
| Upper Turn-Off Propagation Delay | tHPHL | 32 | 32 | 56 | ns | | 6 |
| Lower Turn-On Propagation Delay | tLPLH | 400 | 520 | 640 | ns | RDT = 100k | 6 |
| Upper Turn-On Propagation Delay | tHPLH | 450 | 570 | 690 | ns | RDT = 100k | 6 |
| Lower Turn-On Propagation Delay | tLPLH | 85 | 115 | 160 | ns | RDT = 10k | 6 |
| Upper Turn-On Propagation Delay | tHPLH | 85 | 115 | 160 | ns | RDT = 10k | 6 |
| Junction to Ambient thermal resistance (DPR) | RθJA | | 37.9 | | °C/W | | 5 |
| Junction-to-case (top) thermal resistance (DPR) | RθJC(top) | | 38.1 | | °C/W | | 5 |
| Junction-to-board thermal resistance (DPR) | RθJB | | 14.9 | | °C/W | | 5 |
| Junction-to-case (bottom) thermal resistance (DPR) | RθJC(bot) | | 4.4 | | °C/W | | 5 |
## CAD (KiCad official)
- Symbol: `LM5106SDX`
- Footprint: `Package_SON:WSON-10-1EP_4x4mm_P0.8mm_EP2.6x3mm`
- 3D model: WSON-10-EP(4x4) (KiCad packages3D, STEP)
- 3D model files: `lm5106sdx-etched.step` / `lm5106sdx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm5106sdx.step` / `lm5106sdx.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm5106.pdf) (28 pp, sha256 `1e623b370d6f5134`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm5106sdx-datasheet.pdf)