main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm5106sdx: viewers · Ray
lm5106sdx-etched.glb Publish 0.1.0 · Ray
lm5106sdx-etched.step lm5106sdx: factory component page (tier=mfr) · Ray
lm5106sdx-hero.glb lm5106sdx: hero GLB from the etched model (keeps the MPN mark) · Ray
lm5106sdx-hero.overlay.json Publish 0.1.0 · Ray
lm5106sdx.glb Publish 0.1.0 · Ray
lm5106sdx.kicad_mod Publish 0.1.0 · Ray
lm5106sdx.kicad_sym Publish 0.1.0 · Ray
lm5106sdx.lbr Publish 0.1.0 · Ray
lm5106sdx.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 11 pins · Ray

LM5106SDX

Texas Instruments · Gate Drive ICs · WSON-10-EP(4x4)

LM5106SDX from Texas Instruments, in a WSON-10-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive gate drive supply; decouple VDD to VSS with a low ESR/ESL capacitor placed as close to the IC as possible.
2 HB power_in High-side gate driver bootstrap rail; connect the positive terminal of the bootstrap capacitor to HB and its negative terminal to HS, placed as close to the IC as possible.
3 HO output High-side gate driver output; connect to the gate of the high-side N-MOS device through a short, low inductance path.
4 HS power_in High-side MOSFET source; connect to the negative terminal of the bootstrap capacitor and to the source of the high-side N-MOS device.
5 NC unconnected Not connected.
6 RDT passive Dead-time programming pin; a resistor from RDT to VSS programs the turnon delay of both the high- and low-side MOSFETs and should be placed close to the IC.
7 EN input Logic input for driver enable/disable with TTL compatible threshold and hysteresis; LO and HO are held in the low state when EN is low.
8 IN input Logic input for gate driver with TTL compatible threshold and hysteresis; the high-side MOSFET turns on and the low-side MOSFET turns off when IN is high.
9 VSS power_in Ground return; all signals are referenced to this ground.
10 LO output Low-side gate driver output; connect to the gate of the low-side N-MOS device with a short, low inductance path.
11 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-10-EP(4x4)
Category Power Supply Chip
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD to VSS voltage -0.3 18 V 4
HB to HS voltage -0.3 18 V 4
RDT to VSS voltage -0.3 5 V 4
HS to VSS voltage 100 V 4
HB to VSS voltage 118 V 4
Junction temperature 150 °C 4
Storage temperature range Tstg -55 150 °C 4
VDD supply voltage VDD 8 14 V 4
HS voltage HS -1 100 V 4
HS slew rate 50 V/ns 4
Junction temperature operating -40 125 °C 4
VDD Quiescent Current IDD 0.34 0.6 mA IN = EN = 0 V 5
VDD Operating Current IDDO 2.1 3.5 mA f = 500 kHz 5
Total HB Quiescent Current IHB 0.06 0.2 mA IN = EN = 0 V 5
Total HB Operating Current IHBO 1.5 3 mA f = 500 kHz 5
HB to VSS Current, Quiescent IHBS 0.1 10 µA HS = HB = 100 V 5
Low Level Input Voltage Threshold VIL 0.8 1.8 V 5
High Level Input Voltage Threshold VIH 1.8 2.2 V 5
Input Pulldown Resistance Rpd 100 200 500 kΩ Pin IN and EN 5
Nominal Voltage at RDT VRDT 2.7 3 3.3 V 5
RDT Pin Current Limit IRDT 0.75 1.5 2.25 mA RDT = 0 V 5
VDD Rising Threshold VDDR 6.2 6.9 7.6 V 5
HB Rising Threshold VHBR 5.9 6.6 7.3 V 5
Low-Level Output Voltage LO VOLL 0.21 0.4 V ILO = 100 mA 5
High-Level Output Voltage LO VOHL 0.5 0.85 V ILO = -100 mA, VOHL = VDD, VLO 5
Low-Level Output Voltage HO VOLH 0.21 0.4 V IHO = 100 mA 5
High-Level Output Voltage HO VOHH 0.5 0.85 V IHO = -100 mA, VOHH = HB, HO 5
Junction to Ambient thermal resistance θJA 40 °C/W See(2)(3) 6
Lower Turn-Off Propagation Delay tLPHL 32 32 56 ns 6
Upper Turn-Off Propagation Delay tHPHL 32 32 56 ns 6
Lower Turn-On Propagation Delay tLPLH 400 520 640 ns RDT = 100k 6
Upper Turn-On Propagation Delay tHPLH 450 570 690 ns RDT = 100k 6
Lower Turn-On Propagation Delay tLPLH 85 115 160 ns RDT = 10k 6
Upper Turn-On Propagation Delay tHPLH 85 115 160 ns RDT = 10k 6
Junction to Ambient thermal resistance (DPR) RθJA 37.9 °C/W 5
Junction-to-case (top) thermal resistance (DPR) RθJC(top) 38.1 °C/W 5
Junction-to-board thermal resistance (DPR) RθJB 14.9 °C/W 5
Junction-to-case (bottom) thermal resistance (DPR) RθJC(bot) 4.4 °C/W 5

CAD (KiCad official)

  • Symbol: LM5106SDX
  • Footprint: Package_SON:WSON-10-1EP_4x4mm_P0.8mm_EP2.6x3mm
  • 3D model: WSON-10-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: lm5106sdx-etched.step / lm5106sdx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm5106sdx.step / lm5106sdx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (28 pp, sha256 1e623b370d6f5134, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF