main
Ray Publish 0.1.0 fbc1607
{
  "slug": "lm5101bmax",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Gate Drivers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "motor driver ics",
    "lm5101bmax",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm5101bmax.kicad_sym",
    "lm5101bmax.kicad_mod",
    "lm5101bmax.glb",
    "lm5101bmax.step",
    "lm5101bmax.lbr",
    "docs/hero.png",
    "docs/lm5101bmax-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm5101bmax-hero.glb",
    "lm5101bmax-hero.overlay.json",
    "lm5101bmax-etched.glb"
  ],
  "component": {
    "mpn": "LM5101BMAX",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Motor Driver ICs",
    "subcategory": "Gate Drivers",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lm5101b.pdf",
    "parts": {
      "symbol": "lm5101bmax.kicad_sym",
      "footprint": "lm5101bmax.kicad_mod",
      "model_3d": "lm5101bmax-hero.glb",
      "model_3d_plain": "lm5101bmax-etched.glb",
      "model_3d_step": "lm5101bmax-etched.step",
      "model_3d_step_plain": "lm5101bmax.step",
      "lbr": "lm5101bmax.lbr"
    },
    "distributor_links": {
      "lcsc": "C2677266",
      "mouser": "926-LM5101BMAX"
    },
    "distributor_check": {
      "checked_at": "2026-11-10T08:41:18Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 975 calls left today"
      },
      "mouser": {
        "pn": "926-LM5101BMAX",
        "status": "found",
        "lifecycle": "Obsolete"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive gate drive supply that should be locally decoupled to VSS with a low ESR/ESL capacitor placed as close to the IC as possible; recommended operating range is 9 V to 14 V and the absolute maximum is 18 V."
      },
      {
        "number": "2",
        "name": "HB",
        "type": "power_in",
        "description": "High-side gate driver bootstrap supply, with the bootstrap capacitor positive terminal on HB and negative terminal on HS, recommended HB range VHS + 8 V to VHS + 14 V and HB-to-HS absolute maximum of 18 V."
      },
      {
        "number": "3",
        "name": "HO",
        "type": "output",
        "description": "High-side gate driver output, to be connected to the high-side MOSFET gate by a short, low-inductance path, referenced to HS."
      },
      {
        "number": "4",
        "name": "HS",
        "type": "passive",
        "description": "High-side MOSFET source connection, to be tied to the bootstrap capacitor negative terminal and the high-side MOSFET source; recommended range is -1 V to 100 V, with negative transients never more negative than VDD - 15 V."
      },
      {
        "number": "5",
        "name": "HI",
        "type": "input",
        "description": "High-side driver control input with TTL thresholds on the LM5101B (VIL rising edge about 1.8 V typical, 1.3 V to 2.3 V over temperature), where unused inputs must be tied to ground and not left open."
      },
      {
        "number": "6",
        "name": "LI",
        "type": "input",
        "description": "Low-side driver control input with TTL thresholds on the LM5101B (VIL rising edge about 1.8 V typical, 1.3 V to 2.3 V over temperature), where unused inputs must be tied to ground and not left open."
      },
      {
        "number": "7",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground return to which all signals are referenced; this is the gate driver ground pin on the 8-pin SOIC, which has no exposed pad."
      },
      {
        "number": "8",
        "name": "LO",
        "type": "output",
        "description": "Low-side gate driver output, to be connected to the low-side MOSFET gate by a short, low-inductance path, referenced to VSS."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet pin table lists HS I/O as '—' (no direction given). Type 'passive' is an engineering j; The datasheet pin table labels HB as 'I'. Type 'power_in' is used because HB is the bootstrap supply; Pin numbers and functions are identical to the 8-pin SOIC pinout shown on page 3 and in the pin tabl"
        ],
        "pages_sent": 48,
        "cost_usd": 0.1876,
        "at": "2026-11-10T08:41:05"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lm5101b.pdf",
        "pages": 48,
        "sha256": "391d008aa275b045",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm5101bmax.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm5101bmax-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a5d34fc69df25eee620de29c947d1fb58c6c5dbe8c0f60e235590e3e3f569389",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}