Generated by kicad-footprint-generator · KiCad file format 20260206
LM5101BMAX
Texas Instruments · Gate Drivers · SOIC-8
LM5101BMAX from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive gate drive supply that should be locally decoupled to VSS with a low ESR/ESL capacitor placed as close to the IC as possible; recommended operating range is 9 V to 14 V and the absolute maximum is 18 V. |
| 2 | HB | power_in | High-side gate driver bootstrap supply, with the bootstrap capacitor positive terminal on HB and negative terminal on HS, recommended HB range VHS + 8 V to VHS + 14 V and HB-to-HS absolute maximum of 18 V. |
| 3 | HO | output | High-side gate driver output, to be connected to the high-side MOSFET gate by a short, low-inductance path, referenced to HS. |
| 4 | HS | passive | High-side MOSFET source connection, to be tied to the bootstrap capacitor negative terminal and the high-side MOSFET source; recommended range is -1 V to 100 V, with negative transients never more negative than VDD - 15 V. |
| 5 | HI | input | High-side driver control input with TTL thresholds on the LM5101B (VIL rising edge about 1.8 V typical, 1.3 V to 2.3 V over temperature), where unused inputs must be tied to ground and not left open. |
| 6 | LI | input | Low-side driver control input with TTL thresholds on the LM5101B (VIL rising edge about 1.8 V typical, 1.3 V to 2.3 V over temperature), where unused inputs must be tied to ground and not left open. |
| 7 | VSS | power_in | Ground return to which all signals are referenced; this is the gate driver ground pin on the 8-pin SOIC, which has no exposed pad. |
| 8 | LO | output | Low-side gate driver output, to be connected to the low-side MOSFET gate by a short, low-inductance path, referenced to VSS. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD to VSS | -0.3 | 18 | V | 5 | |||
| HB to HS | -0.3 | 18 | V | 5 | |||
| HS to VSS | -5 | 100 | V | 5 | |||
| LI or HI input | -0.3 | V | Max printed as VDD + 0.3 V | 5 | |||
| LO output | -0.3 | V | Max printed as VDD + 0.3 V | 5 | |||
| HB to VSS | 118 | V | 5 | ||||
| Junction temperature | 150 | °C | 5 | ||||
| Storage temperature | -55 | 150 | °C | 5 | |||
| VDD supply voltage | VDD | 9 | 14 | V | 5 | ||
| HS voltage | HS | -1 | 100 | V | 5 | ||
| HS slew rate | 50 | V/ns | 5 | ||||
| Junction temperature (operating) | -40 | 125 | °C | 5 | |||
| VDD quiescent current | IDD | 0.4 | mA | LI = HI = 0 V, TJ = -40°C to 125°C (LM5101A/B/C) | 6 | ||
| VDD operating current | IDDO | 3 | mA | f = 500 kHz, TJ = -40°C to 125°C | 6 | ||
| Total HB quiescent current | IHB | 0.2 | mA | LI = HI = 0 V, TJ = -40°C to 125°C | 6 | ||
| Total HB operating current | IHBO | 3 | mA | f = 500 kHz, TJ = -40°C to 125°C | 6 | ||
| HB to VSS current, quiescent | IHBS | 10 | µA | HS = HB = 100 V, TJ = -40°C to 125°C | 6 | ||
| Input voltage threshold, rising edge (LM5101A/B/C) | VIL | 1.3 | 2.3 | V | TJ = -40°C to 125°C | 6 | |
| Input pulldown resistance | RI | 100 | 400 | kΩ | TJ = -40°C to 125°C | 6 | |
| VDD rising threshold (UVLO) | VDDR | 6 | 7.4 | V | TJ = -40°C to 125°C | 7 | |
| HB rising threshold (UVLO) | VHBR | 5.7 | 7.1 | V | TJ = -40°C to 125°C | 7 | |
| Low-current forward voltage (bootstrap diode) | VDL | 0.85 | V | IVDD-HB = 100 µA, TJ = -40°C to 125°C | 7 | ||
| High-current forward voltage (bootstrap diode) | VDH | 1 | V | IVDD-HB = 100 mA, TJ = -40°C to 125°C | 7 | ||
| Dynamic resistance (bootstrap diode) | RD | 1.65 | Ω | IVDD-HB = 100 mA, TJ = -40°C to 125°C | 7 | ||
| Low-level output voltage (LM5101B) | VOL | 0.4 | V | IHO = ILO = 100 mA, TJ = -40°C to 125°C | 7 | ||
| High-level output voltage (LM5101B) | VOH | 0.6 | V | IHO = ILO = 100 mA, VOH = VDD, LO or HB, HO, TJ = -40°C to 125°C | 7 | ||
| LO turnoff propagation delay (LM5101B) | tLPHL | 22 | 56 | ns | LI falling to LO falling | 8 | |
| LO turnon propagation delay (LM5101B) | tLPLH | 26 | 56 | ns | LI rising to LO rising | 8 | |
| HO turnoff propagation delay (LM5101B) | tHPHL | 22 | 56 | ns | HI falling to HO falling | 8 | |
| LO turnon propagation delay (LM5101B, HI to HO row) | tHPLH | 26 | 56 | ns | HI rising to HO rising | 8 | |
| Delay matching: LO on and HO off (LM5101B) | tMON | 4 | 10 | ns | 8 | ||
| Delay matching: LO off and HO on (LM5101B) | tMOFF | 4 | 10 | ns | 8 | ||
| Thermal resistance, junction-to-ambient (SOIC 8-pin) | RθJA | 170 | °C/W | 4-layer board per footnote 2 | 6 |
CAD (KiCad official)
- Symbol:
LM5101BMAX - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
lm5101bmax-etched.step/lm5101bmax-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5101bmax.step/lm5101bmax.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (48 pp, sha256
391d008aa275b045, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).