main
Ray lm5088mhx-2: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 385c970
{
  "schema_version": 1,
  "type": "component",
  "slug": "lm5088mhx-2",
  "title": "LM5088MHX-2",
  "brief": "Texas Instruments DC-DC Converters, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "lm5088mhx-2",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "LM5088MHX-2",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-16-EP",
    "pin_count": 17,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm5088",
    "parts": {
      "symbol": "lm5088mhx-2.kicad_sym",
      "footprint": "lm5088mhx-2.kicad_mod",
      "model_3d": "lm5088mhx-2-etched.glb",
      "model_3d_plain": "lm5088mhx-2.glb",
      "model_3d_step": "lm5088mhx-2-etched.step",
      "model_3d_step_plain": "lm5088mhx-2.step",
      "lbr": "lm5088mhx-2.lbr"
    },
    "distributor_links": {
      "lcsc": "C115727"
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage for the IC; operating range is 4.5 V to 75 V absolute maximum 76 V."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Enable input with tri-level control: below 0.4 V shutdown, 0.4 V to 1.2 V standby mode, above 1.2 V operational, with 5-µA internal pull-up current."
      },
      {
        "number": "3",
        "name": "SS",
        "type": "input",
        "description": "Soft start input; internal 11-µA current source charges external capacitor, with 1.2 V reference and 120 mV clamp above FB voltage."
      },
      {
        "number": "4",
        "name": "RAMP",
        "type": "output",
        "description": "Ramp generator output; external 100 pF to 2000 pF capacitor connected to GND sets emulated current ramp slope for peak current mode control."
      },
      {
        "number": "5",
        "name": "RT/SYNC",
        "type": "input",
        "description": "Oscillator frequency set and synchronization input; internal resistor to GND programs switching frequency 50 kHz to 1 MHz, external sync pulse width less than 150 ns."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground return; signal and power ground reference for the controller."
      },
      {
        "number": "7",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier output; internal 60 dB gain amplifier with 3 MHz unity-gain bandwidth, loop compensation network connected between COMP and FB pins."
      },
      {
        "number": "8",
        "name": "FB",
        "type": "input",
        "description": "Feedback signal input to inverting input of error amplifier with 1.205 V regulation threshold and ±18 nA maximum input bias current."
      },
      {
        "number": "9",
        "name": "OUT",
        "type": "input",
        "description": "Output voltage sensing input; connect directly to regulated output voltage to provide VIN-VOUT feedback for ramp generator compensation."
      },
      {
        "number": "10",
        "name": "RES",
        "type": "output",
        "description": "Restart timer output for hiccup mode (LM5088-2 only); external capacitor sets restart delay with 50-µA charge and 25-µA discharge current sources, 1.2 V upper and 0.2 V lower thresholds."
      },
      {
        "number": "11",
        "name": "CSG",
        "type": "power_in",
        "description": "Current sense ground; low-side reference terminal for external current sense resistor connected between CS and CSG pins."
      },
      {
        "number": "12",
        "name": "CS",
        "type": "input",
        "description": "Current sense input measuring re-circulating diode current with internal sample-and-hold circuit and 120 mV cycle-by-cycle current limit threshold."
      },
      {
        "number": "13",
        "name": "SW",
        "type": "output",
        "description": "Switching node output; connect directly to source terminal of external MOSFET switch and free-wheeling diode anode."
      },
      {
        "number": "14",
        "name": "HG",
        "type": "output",
        "description": "High-side gate driver output; 1.5 A peak source and 2 A peak sink current with 12 ns rise and 6 ns fall time driving external MOSFET gate."
      },
      {
        "number": "15",
        "name": "BOOT",
        "type": "passive",
        "description": "Bootstrap capacitor connection; external 0.022 µF minimum ceramic capacitor required between BOOT and SW pins, charged from VCC via internal diode."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_out",
        "description": "Bias regulator output; 7.8 V typical regulation from VIN with 30 mA internal current limit, requires 0.1 µF to 10 µF ceramic decoupling capacitor."
      },
      {
        "number": "17",
        "name": "EP",
        "type": "passive",
        "description": "Exposed thermal pad; electrically isolated must be soldered to ground plane to reduce thermal resistance per thermal analysis recommendations."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 9 (OUT) description in datasheet states 'Connect this pin directly to the regulated output volta; Pin 10 identified as RES (Restart Version) per LM5088-2 variant; confirm part number suffix -2 match"
        ],
        "pages_sent": 45,
        "cost_usd": 0.4284,
        "at": "2026-09-23T13:12:51"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm5088",
        "pages": 45,
        "sha256": "7f168fca38f1dc8e",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm5088mhx-2.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7982746831c0bd23f4690608869ad67776faae5c762fb0376666126a3998921b",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm5088mhx-2-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "1b1ad55a0e79941408e28b3039b8fd2d03fd77459b5966feb9e85cbb13e4f07e",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "HTSSOP-16-EP",
      "Category": "Power Management (PMIC)",
      "Pins": "17"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lm5088mhx-2"
  ],
  "discovery_pitch": "LM5088MHX-2 (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm5088mhx-2.kicad_sym",
    "lm5088mhx-2.kicad_mod",
    "lm5088mhx-2.glb",
    "lm5088mhx-2.step",
    "lm5088mhx-2.lbr",
    "docs/hero.png",
    "docs/lm5088mhx-2-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-28T17:02:03.106Z"
}