component
LM5088MHX-2
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
lm5088mhx-2: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+90−10
package.json+48−8@@ -59,13 +59,13 @@ "number": "2", "name": "EN", "type": "input",- "description": "Enable input with tri-level control: below 0.4 V shutdown, 0.4 V to 1.2 V standby mode, above 1.2 V operational, with 5-\u00b5A internal pull-up current."+ "description": "Enable input with tri-level control: below 0.4 V shutdown, 0.4 V to 1.2 V standby mode, above 1.2 V operational, with 5-µA internal pull-up current." }, { "number": "3", "name": "SS", "type": "input",- "description": "Soft start input; internal 11-\u00b5A current source charges external capacitor, with 1.2 V reference and 120 mV clamp above FB voltage."+ "description": "Soft start input; internal 11-µA current source charges external capacitor, with 1.2 V reference and 120 mV clamp above FB voltage." }, { "number": "4",@@ -95,7 +95,7 @@ "number": "8", "name": "FB", "type": "input",- "description": "Feedback signal input to inverting input of error amplifier with 1.205 V regulation threshold and \u00b118 nA maximum input bias current."+ "description": "Feedback signal input to inverting input of error amplifier with 1.205 V regulation threshold and ±18 nA maximum input bias current." }, { "number": "9",@@ -107,7 +107,7 @@ "number": "10", "name": "RES", "type": "output",- "description": "Restart timer output for hiccup mode (LM5088-2 only); external capacitor sets restart delay with 50-\u00b5A charge and 25-\u00b5A discharge current sources, 1.2 V upper and 0.2 V lower thresholds."+ "description": "Restart timer output for hiccup mode (LM5088-2 only); external capacitor sets restart delay with 50-µA charge and 25-µA discharge current sources, 1.2 V upper and 0.2 V lower thresholds." }, { "number": "11",@@ -137,13 +137,13 @@ "number": "15", "name": "BOOT", "type": "passive",- "description": "Bootstrap capacitor connection; external 0.022 \u00b5F minimum ceramic capacitor required between BOOT and SW pins, charged from VCC via internal diode."+ "description": "Bootstrap capacitor connection; external 0.022 µF minimum ceramic capacitor required between BOOT and SW pins, charged from VCC via internal diode." }, { "number": "16", "name": "VCC", "type": "power_out",- "description": "Bias regulator output; 7.8 V typical regulation from VIN with 30 mA internal current limit, requires 0.1 \u00b5F to 10 \u00b5F ceramic decoupling capacitor."+ "description": "Bias regulator output; 7.8 V typical regulation from VIN with 30 mA internal current limit, requires 0.1 µF to 10 µF ceramic decoupling capacitor." }, { "number": "17",@@ -186,6 +186,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "lm5088mhx-2.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5.0,+ 1.1+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "7982746831c0bd23f4690608869ad67776faae5c762fb0376666126a3998921b",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm5088mhx-2-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5.0,+ 1.1+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "1b1ad55a0e79941408e28b3039b8fd2d03fd77459b5966feb9e85cbb13e4f07e",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -171,7 +171,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "lm5088mhx-2.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5.0,+ 1.1+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "7982746831c0bd23f4690608869ad67776faae5c762fb0376666126a3998921b",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm5088mhx-2-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5.0,+ 1.1+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "1b1ad55a0e79941408e28b3039b8fd2d03fd77459b5966feb9e85cbb13e4f07e",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -219,4 +259,4 @@ "public": true }, "updated_at": "2026-09-28T17:02:03.106Z"-}+}