main
Ray
Publish 0.1.0
af0a4ec
LM5085QMY
Texas Instruments · DC-DC Controllers · MSOP-8-EP
LM5085QMY from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ | input | The current limit threshold is set by an external resistor from VIN to ADJ in conjunction with the external sense resistor or the PFET's RDS(ON). |
| 2 | RT | input | An external resistor from VIN to RT sets the buck switch on-time and switching frequency, and grounding this pin shuts down the controller. |
| 3 | FB | input | Voltage feedback input to the regulation and over-voltage comparators, with a regulated output level of 1.25V. |
| 4 | GND | power_in | Ground reference for all internal circuitry. |
| 5 | ISEN | input | Current sense input for current limit detection, connected to the PFET drain for RDS(ON) sensing or to the PFET source and the sense resistor when using a sense resistor. |
| 6 | PGATE | output | Gate driver output connected to the gate of the external PFET, swinging between VIN (Q1 off) and the VCC pin voltage (Q1 on). |
| 7 | VCC | power_out | Output of the negative voltage regulator (relative to VIN) that biases the PFET gate driver, requiring a low ESR capacitor from VIN to VCC placed as close as possible to the pins. |
| 8 | VIN | power_in | Input supply voltage with an operating range from 4.5V to 75V, requiring a low ESR bypass capacitor located as close as possible to the VIN and GND pins. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8-EP |
| Category | Power Supply Chip |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Voltage | VIN | 4.5 | 75 | V | 4 | ||
| Junction Temperature | TJ | -40 | 125 | °C | 4 | ||
| VIN to GND | VIN | -0.3 | 76 | V | 3 | ||
| ISEN to GND | ISEN | -3 | V | 3 | |||
| ADJ to GND | ADJ | -0.3 | V | 3 | |||
| RT, FB to GND | RT, FB | -0.3 | 7 | V | 3 | ||
| VIN to VCC, VIN to PGATE | VIN | -0.3 | 10 | V | 3 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Operating Current | IIN | 1.3 | 1.8 | mA | Non-Switching, FB = 1.4 V | 4 | |
| Shutdown Current | IQ | 200 | 345 | µA | RT = 0 V | 4 | |
| VIN - VCC regulator voltage | VCC(reg) | 6.9 | 7.7 | 8.5 | V | Vin = 9 V, FB = 1.4 V, ICC = 0 mA | 4 |
| VCC Current Limit | VCC(CL) | 20 | 40 | mA | FB = 1.4 V | 4 | |
| ADJ Pin Current Source | IADJ | 32 | 40 | 48 | µA | VADJ = 46.5 V | 5 |
| Current Limit Comparator Offset | VCL OFFSET | -9 | 0 | 9 | mV | VADJ = 46.5 V, VADJ - VISEN | 5 |
| On-Time 1 | tON-1 | 3.5 | 5 | 7.15 | µs | VIN = 4.5 V, RT = 100kΩ | 5 |
| On-Time 2 | tON-2 | 276 | 360 | 435 | ns | VIN = 48 V, RT = 100kΩ | 5 |
| On-Time 3 | tON-3 | 177 | 235 | 285 | ns | VIN = 75 V, RT = 100kΩ | 5 |
| Minimum On-Time in Current Limit | tON-4 | 55 | 140 | 235 | ns | VIN = 48 V, 25 mV Overdrive at ISEN | 5 |
| Off-Time (Current Limit) | tOFF(CL1) | 5.35 | 7.9 | 10.84 | µs | VIN = 12 V, VFB = 0 V | 5 |
| Off-Time (Current Limit) | tOFF(CL2) | 1.42 | 1.9 | 3.03 | µs | VIN = 12 V, VFB = 1 V | 5 |
| Off-Time (Current Limit) | tOFF(CL3) | 16 | 24 | 32.4 | µs | VIN = 48 V, VFB = 0 V | 5 |
| Off-Time (Current Limit) | tOFF(CL4) | 3.89 | 5.7 | 8.67 | µs | VIN = 48 V, VFB = 1 V | 5 |
| FB Regulation Threshold | VREF | 1.225 | 1.25 | 1.275 | V | 5 | |
| Soft-Start Time | tSS | 1.4 | 2.5 | 4.3 | ms | 5 | |
| Junction-to-ambient thermal resistance (DGN) | θJA | 54.1 | °C/W | DGN (HVSSOP) package column | 4 | ||
| Junction-to-case (top) thermal resistance (DGN) | θJC(top) | 49.1 | °C/W | DGN (HVSSOP) package column | 4 | ||
| Junction-to-board thermal resistance (DGN) | θJB | 26.7 | °C/W | DGN (HVSSOP) package column | 4 | ||
| Junction-to-top characterization parameter (DGN) | ψJT | 1.3 | °C/W | DGN (HVSSOP) package column | 4 | ||
| Junction-to-board characterization parameter (DGN) | ψJB | 26.5 | °C/W | DGN (HVSSOP) package column | 4 | ||
| Junction-to-case (bottom) thermal resistance (DGN) | θJC(bot) | 3.6 | °C/W | DGN (HVSSOP) package column | 4 |
CAD (KiCad official)
- Symbol:
LM5085QMY - Footprint:
Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm - 3D model: MSOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
lm5085qmy-etched.step/lm5085qmy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5085qmy.step/lm5085qmy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
443decee9a8d8c1a, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM5085QMY
**Texas Instruments** · DC-DC Controllers · MSOP-8-EP
LM5085QMY from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ | input | The current limit threshold is set by an external resistor from VIN to ADJ in conjunction with the external sense resistor or the PFET's RDS(ON). |
| 2 | RT | input | An external resistor from VIN to RT sets the buck switch on-time and switching frequency, and grounding this pin shuts down the controller. |
| 3 | FB | input | Voltage feedback input to the regulation and over-voltage comparators, with a regulated output level of 1.25V. |
| 4 | GND | power_in | Ground reference for all internal circuitry. |
| 5 | ISEN | input | Current sense input for current limit detection, connected to the PFET drain for RDS(ON) sensing or to the PFET source and the sense resistor when using a sense resistor. |
| 6 | PGATE | output | Gate driver output connected to the gate of the external PFET, swinging between VIN (Q1 off) and the VCC pin voltage (Q1 on). |
| 7 | VCC | power_out | Output of the negative voltage regulator (relative to VIN) that biases the PFET gate driver, requiring a low ESR capacitor from VIN to VCC placed as close as possible to the pins. |
| 8 | VIN | power_in | Input supply voltage with an operating range from 4.5V to 75V, requiring a low ESR bypass capacitor located as close as possible to the VIN and GND pins. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8-EP |
| Category | Power Supply Chip |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Voltage | VIN | 4.5 | | 75 | V | | 4 |
| Junction Temperature | TJ | -40 | | 125 | °C | | 4 |
| VIN to GND | VIN | -0.3 | | 76 | V | | 3 |
| ISEN to GND | ISEN | -3 | | | V | | 3 |
| ADJ to GND | ADJ | -0.3 | | | V | | 3 |
| RT, FB to GND | RT, FB | -0.3 | | 7 | V | | 3 |
| VIN to VCC, VIN to PGATE | VIN | -0.3 | | 10 | V | | 3 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 3 |
| Operating Current | IIN | | 1.3 | 1.8 | mA | Non-Switching, FB = 1.4 V | 4 |
| Shutdown Current | IQ | | 200 | 345 | µA | RT = 0 V | 4 |
| VIN - VCC regulator voltage | VCC(reg) | 6.9 | 7.7 | 8.5 | V | Vin = 9 V, FB = 1.4 V, ICC = 0 mA | 4 |
| VCC Current Limit | VCC(CL) | 20 | | 40 | mA | FB = 1.4 V | 4 |
| ADJ Pin Current Source | IADJ | 32 | 40 | 48 | µA | VADJ = 46.5 V | 5 |
| Current Limit Comparator Offset | VCL OFFSET | -9 | 0 | 9 | mV | VADJ = 46.5 V, VADJ - VISEN | 5 |
| On-Time 1 | tON-1 | 3.5 | 5 | 7.15 | µs | VIN = 4.5 V, RT = 100kΩ | 5 |
| On-Time 2 | tON-2 | 276 | 360 | 435 | ns | VIN = 48 V, RT = 100kΩ | 5 |
| On-Time 3 | tON-3 | 177 | 235 | 285 | ns | VIN = 75 V, RT = 100kΩ | 5 |
| Minimum On-Time in Current Limit | tON-4 | 55 | 140 | 235 | ns | VIN = 48 V, 25 mV Overdrive at ISEN | 5 |
| Off-Time (Current Limit) | tOFF(CL1) | 5.35 | 7.9 | 10.84 | µs | VIN = 12 V, VFB = 0 V | 5 |
| Off-Time (Current Limit) | tOFF(CL2) | 1.42 | 1.9 | 3.03 | µs | VIN = 12 V, VFB = 1 V | 5 |
| Off-Time (Current Limit) | tOFF(CL3) | 16 | 24 | 32.4 | µs | VIN = 48 V, VFB = 0 V | 5 |
| Off-Time (Current Limit) | tOFF(CL4) | 3.89 | 5.7 | 8.67 | µs | VIN = 48 V, VFB = 1 V | 5 |
| FB Regulation Threshold | VREF | 1.225 | 1.25 | 1.275 | V | | 5 |
| Soft-Start Time | tSS | 1.4 | 2.5 | 4.3 | ms | | 5 |
| Junction-to-ambient thermal resistance (DGN) | θJA | | 54.1 | | °C/W | DGN (HVSSOP) package column | 4 |
| Junction-to-case (top) thermal resistance (DGN) | θJC(top) | | 49.1 | | °C/W | DGN (HVSSOP) package column | 4 |
| Junction-to-board thermal resistance (DGN) | θJB | | 26.7 | | °C/W | DGN (HVSSOP) package column | 4 |
| Junction-to-top characterization parameter (DGN) | ψJT | | 1.3 | | °C/W | DGN (HVSSOP) package column | 4 |
| Junction-to-board characterization parameter (DGN) | ψJB | | 26.5 | | °C/W | DGN (HVSSOP) package column | 4 |
| Junction-to-case (bottom) thermal resistance (DGN) | θJC(bot) | | 3.6 | | °C/W | DGN (HVSSOP) package column | 4 |
## CAD (KiCad official)
- Symbol: `LM5085QMY`
- Footprint: `Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm`
- 3D model: MSOP-8-EP (KiCad packages3D, STEP)
- 3D model files: `lm5085qmy-etched.step` / `lm5085qmy-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm5085qmy.step` / `lm5085qmy.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm5085qmy.pdf) (37 pp, sha256 `443decee9a8d8c1a`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm5085qmy-datasheet.pdf)