main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm5085qmy: viewers · Ray
lm5085qmy-etched.glb Publish 0.1.0 · Ray
lm5085qmy-etched.step lm5085qmy: factory component page (tier=mfr) · Ray
lm5085qmy-hero.glb lm5085qmy: hero GLB from the etched model (keeps the MPN mark) · Ray
lm5085qmy-hero.overlay.json Publish 0.1.0 · Ray
lm5085qmy.glb Publish 0.1.0 · Ray
lm5085qmy.kicad_mod Publish 0.1.0 · Ray
lm5085qmy.kicad_sym Publish 0.1.0 · Ray
lm5085qmy.lbr Publish 0.1.0 · Ray
lm5085qmy.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 9 pins · Ray

LM5085QMY

Texas Instruments · DC-DC Controllers · MSOP-8-EP

LM5085QMY from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ADJ input The current limit threshold is set by an external resistor from VIN to ADJ in conjunction with the external sense resistor or the PFET's RDS(ON).
2 RT input An external resistor from VIN to RT sets the buck switch on-time and switching frequency, and grounding this pin shuts down the controller.
3 FB input Voltage feedback input to the regulation and over-voltage comparators, with a regulated output level of 1.25V.
4 GND power_in Ground reference for all internal circuitry.
5 ISEN input Current sense input for current limit detection, connected to the PFET drain for RDS(ON) sensing or to the PFET source and the sense resistor when using a sense resistor.
6 PGATE output Gate driver output connected to the gate of the external PFET, swinging between VIN (Q1 off) and the VCC pin voltage (Q1 on).
7 VCC power_out Output of the negative voltage regulator (relative to VIN) that biases the PFET gate driver, requiring a low ESR capacitor from VIN to VCC placed as close as possible to the pins.
8 VIN power_in Input supply voltage with an operating range from 4.5V to 75V, requiring a low ESR bypass capacitor located as close as possible to the VIN and GND pins.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-8-EP
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN Voltage VIN 4.5 75 V 4
Junction Temperature TJ -40 125 °C 4
VIN to GND VIN -0.3 76 V 3
ISEN to GND ISEN -3 V 3
ADJ to GND ADJ -0.3 V 3
RT, FB to GND RT, FB -0.3 7 V 3
VIN to VCC, VIN to PGATE VIN -0.3 10 V 3
Storage temperature Tstg -65 150 °C 3
Operating Current IIN 1.3 1.8 mA Non-Switching, FB = 1.4 V 4
Shutdown Current IQ 200 345 µA RT = 0 V 4
VIN - VCC regulator voltage VCC(reg) 6.9 7.7 8.5 V Vin = 9 V, FB = 1.4 V, ICC = 0 mA 4
VCC Current Limit VCC(CL) 20 40 mA FB = 1.4 V 4
ADJ Pin Current Source IADJ 32 40 48 µA VADJ = 46.5 V 5
Current Limit Comparator Offset VCL OFFSET -9 0 9 mV VADJ = 46.5 V, VADJ - VISEN 5
On-Time 1 tON-1 3.5 5 7.15 µs VIN = 4.5 V, RT = 100kΩ 5
On-Time 2 tON-2 276 360 435 ns VIN = 48 V, RT = 100kΩ 5
On-Time 3 tON-3 177 235 285 ns VIN = 75 V, RT = 100kΩ 5
Minimum On-Time in Current Limit tON-4 55 140 235 ns VIN = 48 V, 25 mV Overdrive at ISEN 5
Off-Time (Current Limit) tOFF(CL1) 5.35 7.9 10.84 µs VIN = 12 V, VFB = 0 V 5
Off-Time (Current Limit) tOFF(CL2) 1.42 1.9 3.03 µs VIN = 12 V, VFB = 1 V 5
Off-Time (Current Limit) tOFF(CL3) 16 24 32.4 µs VIN = 48 V, VFB = 0 V 5
Off-Time (Current Limit) tOFF(CL4) 3.89 5.7 8.67 µs VIN = 48 V, VFB = 1 V 5
FB Regulation Threshold VREF 1.225 1.25 1.275 V 5
Soft-Start Time tSS 1.4 2.5 4.3 ms 5
Junction-to-ambient thermal resistance (DGN) θJA 54.1 °C/W DGN (HVSSOP) package column 4
Junction-to-case (top) thermal resistance (DGN) θJC(top) 49.1 °C/W DGN (HVSSOP) package column 4
Junction-to-board thermal resistance (DGN) θJB 26.7 °C/W DGN (HVSSOP) package column 4
Junction-to-top characterization parameter (DGN) ψJT 1.3 °C/W DGN (HVSSOP) package column 4
Junction-to-board characterization parameter (DGN) ψJB 26.5 °C/W DGN (HVSSOP) package column 4
Junction-to-case (bottom) thermal resistance (DGN) θJC(bot) 3.6 °C/W DGN (HVSSOP) package column 4

CAD (KiCad official)

  • Symbol: LM5085QMY
  • Footprint: Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm
  • 3D model: MSOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: lm5085qmy-etched.step / lm5085qmy-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm5085qmy.step / lm5085qmy.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 443decee9a8d8c1a, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF