component
LM5085MYX
Public Made by Adomby adom
Texas Instruments DC-DC Converters, MSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/lm5085myx
040ece3
LM5085MYX
Texas Instruments · DC-DC Converters · MSOP-8-EP
LM5085MYX from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ | input | Current limit threshold set by external resistor from VIN to ADJ in conjunction with external sense resistor or PFET's RDS(ON). |
| 2 | RT | input | External resistor from VIN to RT sets buck switch on-time and switching frequency; grounding this pin shuts down the controller. |
| 3 | FB | input | Voltage feedback to regulation and over-voltage comparators with 1.25V regulation threshold. |
| 4 | GND | power_in | Ground reference for all internal circuitry. |
| 5 | ISEN | input | Current sense input connected to PFET drain for RDS(ON) sense or to PFET source and sense resistor for external current sense. |
| 6 | PGATE | output | Gate driver output connected to external PFET gate. |
| 7 | VCC | power_out | Negative voltage regulator output relative to VIN that biases PFET gate driver; requires low ESR capacitor from VIN to VCC located close to pins. |
| 8 | VIN | power_in | Input supply voltage with operating range 4.5V to 75V; requires low ESR bypass capacitor located close to VIN and GND pins. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8-EP |
| Category | Power Management (PMIC) |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
LM5085MYX - Footprint:
Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm - 3D model: MSOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
lm5085myx-etched.step/lm5085myx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5085myx.step/lm5085myx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
5a34a0aa7ad4c733, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM5085MYX
**Texas Instruments** · DC-DC Converters · MSOP-8-EP
LM5085MYX from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ | input | Current limit threshold set by external resistor from VIN to ADJ in conjunction with external sense resistor or PFET's RDS(ON). |
| 2 | RT | input | External resistor from VIN to RT sets buck switch on-time and switching frequency; grounding this pin shuts down the controller. |
| 3 | FB | input | Voltage feedback to regulation and over-voltage comparators with 1.25V regulation threshold. |
| 4 | GND | power_in | Ground reference for all internal circuitry. |
| 5 | ISEN | input | Current sense input connected to PFET drain for RDS(ON) sense or to PFET source and sense resistor for external current sense. |
| 6 | PGATE | output | Gate driver output connected to external PFET gate. |
| 7 | VCC | power_out | Negative voltage regulator output relative to VIN that biases PFET gate driver; requires low ESR capacitor from VIN to VCC located close to pins. |
| 8 | VIN | power_in | Input supply voltage with operating range 4.5V to 75V; requires low ESR bypass capacitor located close to VIN and GND pins. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8-EP |
| Category | Power Management (PMIC) |
| Pins | 9 |
## CAD (KiCad official)
- Symbol: `LM5085MYX`
- Footprint: `Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm`
- 3D model: MSOP-8-EP (KiCad packages3D, STEP)
- 3D model files: `lm5085myx-etched.step` / `lm5085myx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm5085myx.step` / `lm5085myx.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm5085) (39 pp, sha256 `5a34a0aa7ad4c733`, retrieved 2026-09-22, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm5085myx-datasheet.pdf)