main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm5085myx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm5085myx: viewers · Ray
lm5085myx-etched.fit.json lm5085myx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm5085myx-etched.glb lm5085myx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm5085myx-etched.step lm5085myx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm5085myx.glb Publish 0.1.0 · Ray
lm5085myx.kicad_mod Publish 0.1.0 · Ray
lm5085myx.kicad_sym Publish 0.1.0 · Ray
lm5085myx.lbr Publish 0.1.0 · Ray
lm5085myx.step Publish 0.1.0 · Ray
package.json lm5085myx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json lm5085myx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/lm5085myx · Ray

LM5085MYX

Texas Instruments · DC-DC Converters · MSOP-8-EP

LM5085MYX from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ADJ input Current limit threshold set by external resistor from VIN to ADJ in conjunction with external sense resistor or PFET's RDS(ON).
2 RT input External resistor from VIN to RT sets buck switch on-time and switching frequency; grounding this pin shuts down the controller.
3 FB input Voltage feedback to regulation and over-voltage comparators with 1.25V regulation threshold.
4 GND power_in Ground reference for all internal circuitry.
5 ISEN input Current sense input connected to PFET drain for RDS(ON) sense or to PFET source and sense resistor for external current sense.
6 PGATE output Gate driver output connected to external PFET gate.
7 VCC power_out Negative voltage regulator output relative to VIN that biases PFET gate driver; requires low ESR capacitor from VIN to VCC located close to pins.
8 VIN power_in Input supply voltage with operating range 4.5V to 75V; requires low ESR bypass capacitor located close to VIN and GND pins.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-8-EP
Category Power Management (PMIC)
Pins 9

CAD (KiCad official)

  • Symbol: LM5085MYX
  • Footprint: Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm
  • 3D model: MSOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: lm5085myx-etched.step / lm5085myx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm5085myx.step / lm5085myx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (39 pp, sha256 5a34a0aa7ad4c733, retrieved 2026-09-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF