main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm5085my: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm5085my: viewers · Ray
lm5085my-etched.fit.json lm5085my: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm5085my-etched.glb lm5085my: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm5085my-etched.step lm5085my: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm5085my.glb Publish 0.1.0 · Ray
lm5085my.kicad_mod Publish 0.1.0 · Ray
lm5085my.kicad_sym Publish 0.1.0 · Ray
lm5085my.lbr Publish 0.1.0 · Ray
lm5085my.step Publish 0.1.0 · Ray
package.json lm5085my: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json lm5085my: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/lm5085my · Ray

LM5085MY

Texas Instruments · DC-DC Converters · MSOP-8-EP

LM5085MY from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ADJ input The current limit threshold is set by an external resistor from VIN to ADJ in conjunction with the external sense resistor or the PFET's RDS(ON).
2 RT input An external resistor from VIN to RT sets the buck switch on-time and switching frequency; grounding this pin shuts down the controller.
3 FB input Voltage feedback from input to regulation and over-voltage comparators with regulation level of 1.25V.
4 GND power_in Ground reference for all internal circuitry.
5 ISEN input Connect to PFET drain when using RDS(ON) current sense or to PFET source and sense resistor when using external current sense.
6 PGATE output Gate driver output connected to the gate of the external PFET.
7 VCC power_out Output of negative voltage regulator relative to VIN biasing the PFET gate driver with low ESR capacitor required from VIN to VCC located as close as possible to the pins.
8 VIN power_in Operating input range from 4.5V to 75V requiring low ESR bypass capacitor located as close as possible to VIN and GND pins.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-8-EP
Category Power Management (PMIC)
Pins 9

CAD (KiCad official)

  • Symbol: LM5085MY
  • Footprint: Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm
  • 3D model: MSOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: lm5085my-etched.step / lm5085my-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm5085my.step / lm5085my.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (39 pp, sha256 5a34a0aa7ad4c733, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF