component
LM5085MY
Public Made by Adomby adom
Texas Instruments DC-DC Converters, MSOP-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM5085MY
Texas Instruments · DC-DC Converters · MSOP-8-EP
LM5085MY from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ | input | The current limit threshold is set by an external resistor from VIN to ADJ in conjunction with the external sense resistor or the PFET's RDS(ON). |
| 2 | RT | input | An external resistor from VIN to RT sets the buck switch on-time and switching frequency; grounding this pin shuts down the controller. |
| 3 | FB | input | Voltage feedback from input to regulation and over-voltage comparators with regulation level of 1.25V. |
| 4 | GND | power_in | Ground reference for all internal circuitry. |
| 5 | ISEN | input | Connect to PFET drain when using RDS(ON) current sense or to PFET source and sense resistor when using external current sense. |
| 6 | PGATE | output | Gate driver output connected to the gate of the external PFET. |
| 7 | VCC | power_out | Output of negative voltage regulator relative to VIN biasing the PFET gate driver with low ESR capacitor required from VIN to VCC located as close as possible to the pins. |
| 8 | VIN | power_in | Operating input range from 4.5V to 75V requiring low ESR bypass capacitor located as close as possible to VIN and GND pins. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8-EP |
| Category | Power Management (PMIC) |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
LM5085MY - Footprint:
Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm - 3D model: MSOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
lm5085my-etched.step/lm5085my-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5085my.step/lm5085my.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
5a34a0aa7ad4c733, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).