Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

main

Generated by kicad-footprint-generator · KiCad file format 20260206

Name	Last commit message	Last updated
docs	Publish 0.1.0 · Ray	1d ago
viewers	lm5060qdgsrq1: viewers · Ray	1d ago
lm5060qdgsrq1-etched.glb	lm5060qdgsrq1: factory component page (tier=lcsc) · Ray	1d ago
lm5060qdgsrq1-etched.step	lm5060qdgsrq1: factory component page (tier=lcsc) · Ray	1d ago
lm5060qdgsrq1-hero.glb	lm5060qdgsrq1: hero GLB from the etched model (keeps the MPN mark) · Ray	19h ago
lm5060qdgsrq1-hero.overlay.json	Publish 0.1.0 · Ray	1d ago
lm5060qdgsrq1.glb	Publish 0.1.0 · Ray	1d ago
lm5060qdgsrq1.kicad_mod	Publish 0.1.0 · Ray	1d ago
lm5060qdgsrq1.kicad_sym	Publish 0.1.0 · Ray	1d ago
lm5060qdgsrq1.lbr	Publish 0.1.0 · Ray	1d ago
lm5060qdgsrq1.step	Publish 0.1.0 · Ray	1d ago
package.json	Publish 0.1.0 · Ray	1d ago
page.json	Set visibility: public · Ray	1d ago
README.md	Initial commit: component/lm5060qdgsrq1 · Ray	1d ago

LM5060QDGSRQ1

Texas Instruments · Surge Protection Devices (SPDs) · VSSOP-10-0.5mm

LM5060QDGSRQ1 from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	SENSE	input	Input voltage sense pin where a 16 µA typical constant current sink flows through an external resistor to set the threshold for VDS fault detection.
2	VIN	power_in	Supply voltage input with an operating range of 5.5 V to 65 V; the internal power-on-reset typically becomes active above 5.1 V, and a small ceramic bypass capacitor close to this pin is recommended.
3	OVP	input	Over-voltage comparator input that pulls GATE low when the pin exceeds the typical 2.0 V threshold without latching off, and normal operation resumes when it falls below typically 1.76 V.
4	UVLO	input	Under-voltage lockout comparator input that releases the GATE pull-down above typically 1.6 V, and includes a 5.5 µA typical current sink that holds it low when open.
5	EN	input	Enable input where a voltage below 0.8 V switches the device to low-current shutdown and a voltage above 2.0 V enables the internal bias and UVLO comparator, with a 6 µA typical sink holding it low when open.
6	GND	power_in	Circuit ground for the device.
7	TIMER	bidirectional	Timing capacitor pin that sets the VDS fault detection delay; when it exceeds the 2.0 V threshold the MOSFET is latched off, and the absolute maximum rating to GND is 7 V.
8	nPGD	output	Open-drain fault status output that indicates a VDS fault when high, with the datasheet recommending the low-state sink current be limited below 5 mA.
9	OUT	input	Output voltage sense pin connected to the external MOSFET source, used internally to detect VDS and VGS conditions.
10	GATE	output	Gate drive output for the external N-channel MOSFET, charged by a 24 µA typical constant current source and clamped by an internal zener typically 16.8 V above the OUT pin.

Key specifications

Parameter	Value
Manufacturer	Texas Instruments
Package	VSSOP-10-0.5mm
Category	Circuit Protection
Pins	10

CAD (KiCad official)

Symbol: LM5060QDGSRQ1
Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
3D model files: lm5060qdgsrq1-etched.step / lm5060qdgsrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm5060qdgsrq1.step / lm5060qdgsrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Texas Instruments datasheet (41 pp, sha256 38a3fbe1f0f97004, retrieved 2026-10-08, tier: lcsc)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF