LM5060Q1MMX

{
  "schema_version": 1,
  "type": "component",
  "slug": "lm5060q1mmx",
  "title": "LM5060Q1MMX",
  "brief": "Texas Instruments Global Sourcing Parts, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "global sourcing parts",
    "lm5060q1mmx",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "LM5060Q1MMX",
    "manufacturer": "Texas Instruments",
    "package": "VSSOP-10-0.5mm",
    "pin_count": 10,
    "category": "Global Sourcing Parts",
    "subcategory": "Global Sourcing Parts",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm5060",
    "parts": {
      "symbol": "lm5060q1mmx.kicad_sym",
      "footprint": "lm5060q1mmx.kicad_mod",
      "model_3d": "lm5060q1mmx-hero.glb",
      "model_3d_plain": "lm5060q1mmx.glb",
      "model_3d_step": "lm5060q1mmx-etched.step",
      "model_3d_step_plain": "lm5060q1mmx.step",
      "lbr": "lm5060q1mmx.lbr"
    },
    "distributor_links": {
      "lcsc": "C206490"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T23:06:56Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SENSE",
        "type": "input",
        "description": "Input voltage sense pin where a 16 µA typical constant current sink flows through an external resistor to set the VDS fault detection threshold."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply voltage input with an operating range of 5.5 V to 65 V, where the internal power-on-reset typically becomes active above 5.1 V and a small ceramic bypass capacitor close to the pin is recommended."
      },
      {
        "number": "3",
        "name": "OVP",
        "type": "input",
        "description": "Over-voltage protection comparator input set by an external resistor divider; GATE is pulled low when OVP exceeds the typical 2.0 V threshold without latching off, and operation resumes when OVP falls below typically 1.76 V."
      },
      {
        "number": "4",
        "name": "UVLO",
        "type": "input",
        "description": "Under-voltage lockout comparator input set by a resistor divider from input supply to ground; above typically 1.6 V it releases the GATE pull-down, and a 5.5 µA typical sink holds it low when open."
      },
      {
        "number": "5",
        "name": "EN",
        "type": "input",
        "description": "Enable input where a voltage below 0.8 V switches the device to low-current shutdown and above 2.0 V enables the internal bias and UVLO comparator, with a 6 µA typical sink holding it low when open."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Circuit ground."
      },
      {
        "number": "7",
        "name": "TIMER",
        "type": "bidirectional",
        "description": "Timing capacitor pin that sets the VDS fault detection delay; when the TIMER pin exceeds the 2.0 V threshold the MOSFET is latched off until EN, UVLO or VIN is toggled low and then high."
      },
      {
        "number": "8",
        "name": "nPGD",
        "type": "output",
        "description": "Open-drain fault status output that is active when the OUT pin voltage exceeds the SENSE pin voltage, with low indicating no fault per the pin table."
      },
      {
        "number": "9",
        "name": "OUT",
        "type": "input",
        "description": "Output voltage sense connected to the external MOSFET source, used internally to detect VDS and VGS conditions."
      },
      {
        "number": "10",
        "name": "GATE",
        "type": "output",
        "description": "Gate drive output for the external N-channel MOSFET, charged by a 24 µA typical charge-pump source and clamped by an internal zener at typically 16.8 V above OUT, with an optional capacitor to GND to slow dV/dt."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package match confirmed: the addendum lists LM5060Q1MMX/NOPB as VSSOP (DGS), 10 pins, 3500-unit larg; nPGD polarity conflict in the datasheet: the pin table says low = no fault and the indicator is acti; Pin types are mapped from the datasheet's I/O/P legend: TIMER I/O is mapped to bidirectional, OUT an"
        ],
        "pages_sent": 11,
        "cost_usd": 0.0627,
        "at": "2026-10-11T23:06:40"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm5060",
        "pages": 41,
        "sha256": "38a3fbe1f0f97004",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm5060q1mmx.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm5060q1mmx-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f13afe6738b5c69123a16743291f5e11b8f42d2d23ca263889f0e9cf441907f7",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "VSSOP-10-0.5mm",
      "Category": "Global Sourcing Parts",
      "Pins": "10"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lm5060q1mmx"
  ],
  "discovery_pitch": "LM5060Q1MMX (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm5060q1mmx.kicad_sym",
    "lm5060q1mmx.kicad_mod",
    "lm5060q1mmx.glb",
    "lm5060q1mmx.step",
    "lm5060q1mmx.lbr",
    "docs/hero.png",
    "docs/lm5060q1mmx-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm5060q1mmx-hero.glb",
    "lm5060q1mmx-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}