main
Ray
Publish 0.1.0
830af20
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319
{
"slug": "lm5046sq",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments AC-DC Controllers & Regulators, WQFN-28-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power supply chip",
"lm5046sq",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lm5046sq.kicad_sym",
"lm5046sq.kicad_mod",
"lm5046sq.glb",
"lm5046sq.step",
"lm5046sq.lbr",
"docs/hero.png",
"docs/lm5046sq-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lm5046sq-hero.glb",
"lm5046sq-hero.overlay.json",
"lm5046sq-etched.glb"
],
"component": {
"mpn": "LM5046SQ",
"manufacturer": "Texas Instruments",
"package": "WQFN-28-EP(5x5)",
"pin_count": 29,
"category": "Power Supply Chip",
"subcategory": "AC-DC Controllers & Regulators",
"datasheet": "https://www.ti.com/cn/lit/gpn/lm5046",
"parts": {
"symbol": "lm5046sq.kicad_sym",
"footprint": "lm5046sq.kicad_mod",
"model_3d": "lm5046sq-hero.glb",
"model_3d_plain": "lm5046sq-etched.glb",
"model_3d_step": "lm5046sq-etched.step",
"model_3d_step_plain": "lm5046sq.step",
"lbr": "lm5046sq.lbr"
},
"distributor_links": {
"lcsc": "C2870964"
},
"distributor_check": {
"checked_at": "2026-10-28T17:00:29Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "SLOPE",
"type": "output",
"description": "Ramping current source from 0 to 100 µA for slope compensation in current mode control; tie to ground if slope compensation is not required."
},
{
"number": "2",
"name": "COMP",
"type": "input",
"description": "Opto-coupler input to the PWM: zero input current gives maximum duty cycle and 1 mA reduces the duty cycle to zero."
},
{
"number": "3",
"name": "REF",
"type": "output",
"description": "5 V reference output with a maximum output current of 15 mA, locally decoupled with a 0.1 µF capacitor."
},
{
"number": "4",
"name": "RT/SYNC",
"type": "input",
"description": "Resistor between RT and AGND sets the oscillator frequency; synchronization requires an AC-coupled pulse raising the pin at least 1.5 V above the 2 V nominal bias level."
},
{
"number": "5",
"name": "AGND",
"type": "power_in",
"description": "Analog ground, to be connected directly to the power ground."
},
{
"number": "6",
"name": "RD1",
"type": "input",
"description": "Resistor between RD1 and AGND sets the delay from the falling edge of HO1/SR1 or LO1/SR2 to the rising edge of LO1 or HO1 respectively."
},
{
"number": "7",
"name": "RD2",
"type": "input",
"description": "Resistor between RD2 and AGND sets the delay from the falling edge of LO2 or HO2 to the rising edge of HO2 or LO2 respectively."
},
{
"number": "8",
"name": "RES",
"type": "input",
"description": "Restart timer: when CS exceeds the 750 mV limit, 30 µA is sourced into the RES capacitor, and at 1.0 V the SS capacitor is discharged to disable the outputs."
},
{
"number": "9",
"name": "SS",
"type": "input",
"description": "Soft-start pin charged by an internal 20 µA source; pulling it below 200 mV stops PWM pulses at HO1,2 and LO1,2 and turns off the synchronous rectifiers."
},
{
"number": "10",
"name": "SSSR",
"type": "input",
"description": "Sets the synchronous rectifier soft-start ramp with an external capacitor and internal 20 µA source, enabled after the first output pulse when SS > 2 V and Icomp < 800 µA."
},
{
"number": "11",
"name": "SSOFF",
"type": "input",
"description": "Connect to AGND for soft-stop on VIN UVLO and hiccup-mode current limit, or to REF for a hard stop on any fault."
},
{
"number": "12",
"name": "HS2",
"type": "output",
"description": "Switch node common to the high-side FET source, low-side FET drain and transformer primary winding."
},
{
"number": "13",
"name": "HO2",
"type": "output",
"description": "High-side PWM output driving the upper bridge MOSFET with 1.5 A peak source and 2 A peak sink current."
},
{
"number": "14",
"name": "BST2",
"type": "power_out",
"description": "Bootstrap capacitor between BST2 and HS2 provides bias for the high-side HO2 driver; BST1/BST2 to HS1/HS2 must not exceed 16 V."
},
{
"number": "15",
"name": "SR2",
"type": "output",
"description": "Synchronous rectifier gate control output capable of 100 mA peak source and 400 mA peak sink."
},
{
"number": "16",
"name": "LO2",
"type": "output",
"description": "Low-side PWM gate driver output with 1.5 A peak source and 2 A peak sink current."
},
{
"number": "17",
"name": "VCC",
"type": "power_out",
"description": "Start-up regulator output initially regulated to 9.5 V and reduced to 7.7 V once SSSR reaches 1 V; external bias of 10 V to 14 V is recommended, absolute maximum 16 V."
},
{
"number": "18",
"name": "PGND",
"type": "power_in",
"description": "Power ground, to be connected directly to analog ground."
},
{
"number": "19",
"name": "LO1",
"type": "output",
"description": "Low-side PWM gate driver output with 1.5 A peak source and 2 A peak sink current."
},
{
"number": "20",
"name": "SR1",
"type": "output",
"description": "Synchronous rectifier gate control output capable of 100 mA peak source and 400 mA peak sink."
},
{
"number": "21",
"name": "BST1",
"type": "power_out",
"description": "Bootstrap capacitor between BST1 and HS1 provides bias for the high-side HO1 driver; an external diode from VCC charges it when HS1 is low."
},
{
"number": "22",
"name": "HO1",
"type": "output",
"description": "High-side PWM output driving the upper bridge MOSFET with 1.5 A peak source and 2 A peak sink current."
},
{
"number": "23",
"name": "HS1",
"type": "output",
"description": "Switch node common to the high-side FET source, low-side FET drain and transformer primary winding."
},
{
"number": "24",
"name": "VIN",
"type": "power_in",
"description": "Input to the start-up regulator with an operating range of 14 V to 100 V; outside this range VCC can be biased directly by an external regulator."
},
{
"number": "25",
"name": "UVLO",
"type": "input",
"description": "External divider sets the shutdown and standby levels; VCC and REF enable at 0.4 V, SS releases at 1.25 V, with 20 µA hysteresis."
},
{
"number": "26",
"name": "OVP",
"type": "input",
"description": "External divider sets the overvoltage shutdown level with a 1.25 V threshold and 20 µA hysteresis; an NTC divider may be used for temperature shutdown."
},
{
"number": "27",
"name": "RAMP",
"type": "input",
"description": "Modulation ramp for the PWM comparator (current mode or feed-forward voltage mode), reset to GND at the end of every cycle."
},
{
"number": "28",
"name": "CS",
"type": "input",
"description": "Current sense input: when CS exceeds 750 mV the PWM pulse is terminated for cycle-by-cycle current limit, and an internal switch holds CS low for 40 ns after either output switches high."
},
{
"number": "29",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pin-to-number assignment for the WQFN package is taken from the 'WQFN NO.' column of the Pin Functio; Paired pins (HS1,2 / HO1,2 / BST1,2 / LO1,LO2) list WQFN numbers as a combined row without per-pin m; Datasheet lists VCC as type I, but it is the start-up regulator output (9.5 V / 7.7 V). Typed as pow",
"exposed pad 29 added from the footprint"
],
"pages_sent": 9,
"cost_usd": 0.0749,
"at": "2026-10-28T17:00:15"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/lm5046",
"pages": 49,
"sha256": "8dc1fece0dbb9db8",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 29,
"described": 29,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lm5046sq.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.92
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "e9d6d740f505b03e5aa0ac826330f9e269344b84656d051f50eb07ac162749eb",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lm5046sq-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.92
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "b675cde50008ac7b926d2bf58710baa7f1886182c27d0af2312962434bae94d4",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}