main
Ray
Publish 0.1.0
2d3d900
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318
{
"slug": "lm5045sq",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments AC-DC Controllers & Regulators, WQFN-28-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power supply chip",
"lm5045sq",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lm5045sq.kicad_sym",
"lm5045sq.kicad_mod",
"lm5045sq.glb",
"lm5045sq.step",
"lm5045sq.lbr",
"docs/hero.png",
"docs/lm5045sq-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lm5045sq-hero.glb",
"lm5045sq-hero.overlay.json",
"lm5045sq-etched.glb"
],
"component": {
"mpn": "LM5045SQ",
"manufacturer": "Texas Instruments",
"package": "WQFN-28-EP(5x5)",
"pin_count": 29,
"category": "Power Supply Chip",
"subcategory": "AC-DC Controllers & Regulators",
"datasheet": "https://www.ti.com/cn/lit/gpn/lm5045",
"parts": {
"symbol": "lm5045sq.kicad_sym",
"footprint": "lm5045sq.kicad_mod",
"model_3d": "lm5045sq-hero.glb",
"model_3d_plain": "lm5045sq-etched.glb",
"model_3d_step": "lm5045sq-etched.step",
"model_3d_step_plain": "lm5045sq.step",
"lbr": "lm5045sq.lbr"
},
"distributor_links": {
"lcsc": "C2861770"
},
"distributor_check": {
"checked_at": "2026-10-26T19:08:39Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "SLOPE",
"type": "output",
"description": "Provides a 0 to 100µA ramp current source for slope compensation in current-mode control; must be grounded if slope compensation is not needed."
},
{
"number": "2",
"name": "COMP",
"type": "input",
"description": "PWM input where an external optocoupler sinks current into an internal NPN current mirror; maximum duty cycle at zero input current and zero duty cycle at 1mA."
},
{
"number": "3",
"name": "REF",
"type": "power_out",
"description": "5V reference output with 15mA maximum output current; decouple locally with a 0.1µF capacitor."
},
{
"number": "4",
"name": "RT/SYNC",
"type": "input",
"description": "Oscillator frequency set by a resistor to AGND; synchronization by AC-coupled pulses that raise the pin at least 1.5V above the 2V nominal bias level."
},
{
"number": "5",
"name": "AGND",
"type": "power_in",
"description": "Analog ground, connected directly to the power ground."
},
{
"number": "6",
"name": "RD1",
"type": "passive",
"description": "Synchronous rectifier leading-edge delay: resistor to AGND sets the delay from the falling edge of SR1/SR2 to the rising edge of HO2/LO1 or HO1/LO2."
},
{
"number": "7",
"name": "RD2",
"type": "passive",
"description": "Synchronous rectifier trailing-edge delay: resistor to AGND sets the delay from the falling edge of HO1/LO2 or HO2/LO1 to the rising edge of SR2 or SR1."
},
{
"number": "8",
"name": "RES",
"type": "passive",
"description": "Restart timer: 30µA flows into the RES capacitor on each cycle-by-cycle current limit and at 1.0V the SS capacitor is discharged to disable outputs, then 8 ramps between 2V and 4V occur before restart."
},
{
"number": "9",
"name": "SS",
"type": "passive",
"description": "Soft-start input charged by an internal 20µA source; pulling it below 200mV stops PWM pulses on HO1, HO2, LO1, LO2 and turns the synchronous rectifier FETs off."
},
{
"number": "10",
"name": "SSSR",
"type": "passive",
"description": "Secondary-side soft-start: external capacitor with an internal 20µA source sets the synchronous rectifier soft-start ramp, enabled when SS > 2V and ICOMP < 800µA."
},
{
"number": "11",
"name": "SSOFF",
"type": "input",
"description": "Soft-stop disable: connected to AGND gives soft stop on VIN UVLO and hiccup current limit; connected to REF gives hard stop on any fault."
},
{
"number": "12",
"name": "HS2",
"type": "passive",
"description": "Switch node connection: common connection of the high-side FET source, low-side FET drain and transformer primary; absolute maximum -5V to 105V to GND."
},
{
"number": "13",
"name": "HO2",
"type": "output",
"description": "High-side PWM output driving the upper bridge MOSFET with 1.5A peak source and 2A peak sink current."
},
{
"number": "14",
"name": "BST2",
"type": "passive",
"description": "Gate-drive bootstrap: capacitor to HS2 supplies the high-side HO2 driver, with an external diode from VCC charging it when HS2 is low."
},
{
"number": "15",
"name": "SR2",
"type": "output",
"description": "Synchronous rectifier gate control output with 100mA peak source and 400mA peak sink current."
},
{
"number": "16",
"name": "LO2",
"type": "output",
"description": "Low-side PWM gate driver output with 1.5A peak source and 2A peak sink current."
},
{
"number": "17",
"name": "VCC",
"type": "power_out",
"description": "Startup regulator output regulated to 9.5V initially, falling to 7.7V once SSSR reaches 1V; recommended external voltage range 10V to 14V, with the startup regulator shutting off if an auxiliary winding raises it above the setpoint."
},
{
"number": "18",
"name": "PGND",
"type": "power_in",
"description": "Power ground, connected directly to the analog ground."
},
{
"number": "19",
"name": "LO1",
"type": "output",
"description": "Low-side PWM gate driver output with 1.5A peak source and 2A peak sink current."
},
{
"number": "20",
"name": "SR1",
"type": "output",
"description": "Synchronous rectifier gate control output with 100mA peak source and 400mA peak sink current."
},
{
"number": "21",
"name": "BST1",
"type": "passive",
"description": "Gate-drive bootstrap: capacitor to HS1 supplies the high-side HO1 driver, with an external diode from VCC charging it when HS1 is low."
},
{
"number": "22",
"name": "HO1",
"type": "output",
"description": "High-side PWM output driving the upper bridge MOSFET with 1.5A peak source and 2A peak sink current."
},
{
"number": "23",
"name": "HS1",
"type": "passive",
"description": "Switch node connection: common connection of the high-side FET source, low-side FET drain and transformer primary; absolute maximum -5V to 105V to GND."
},
{
"number": "24",
"name": "VIN",
"type": "power_in",
"description": "Input supply to the startup regulator with operating range 14V to 100V; can be bypassed by biasing VCC externally."
},
{
"number": "25",
"name": "UVLO",
"type": "input",
"description": "Line undervoltage lockout: VCC and REF regulators enable at the 0.4V threshold and the controller enters run mode at the 1.25V threshold, with 20µA hysteresis current sink."
},
{
"number": "26",
"name": "OVP/OTP",
"type": "input",
"description": "Overvoltage protection input with 1.25V threshold and 20µA hysteresis current; can also be used with an NTC thermistor divider for over-temperature shutdown."
},
{
"number": "27",
"name": "RAMP",
"type": "input",
"description": "PWM comparator modulation ramp input, either a primary current signal (current mode) or proportional to input voltage (feed-forward voltage mode), reset to GND each cycle."
},
{
"number": "28",
"name": "CS",
"type": "input",
"description": "Current sense input that terminates the PWM pulse when above 750mV (cycle-by-cycle limit), with an internal switch holding CS low for 40ns after output turn-on for leading-edge blanking."
},
{
"number": "29",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The package hint says WQFN-28-EP, and the package drawing (Figure 4-2) shows a center pad. The datas; The datasheet's I/O column in Table 4-1 is inconsistent with the pin functions (for example AGND, PG; The datasheet names pin 26 'OVP/OTP' in the pin table but 'OVP' elsewhere. Pin 4 is 'RT/SYNC' in the"
],
"pages_sent": 37,
"cost_usd": 0.3517,
"at": "2026-10-26T19:08:23"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/lm5045",
"pages": 47,
"sha256": "47e7c49a68c6bd8e",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 29,
"described": 29,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lm5045sq.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.92
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "e9d6d740f505b03e5aa0ac826330f9e269344b84656d051f50eb07ac162749eb",
"checked": "2026-10-26",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lm5045sq-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.92
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "e7305c05de9741d01fa2c676a00f31a4842c3af6d8c52a32375b7091b22175ea",
"checked": "2026-10-26",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}