main
History Download
Ray Publish 0.1.0 c08ea5b

LM5039MHX

Texas Instruments · DC-DC Controllers · HTSSOP-20-EP

LM5039MHX from Texas Instruments, in a HTSSOP-20-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RAMP input An external RC circuit from VIN sets the ramp slope, and the pin is discharged at the end of every cycle by an internal FET.
2 UVLO input An external voltage divider sets the shutdown and standby levels, with VCC and REF enabled at the 0.4V threshold and SS released at the 1.25V threshold.
3 ACL passive A capacitor from ACL to GND integrates the average current limit and terminates the PWM cycle as the ACL pin voltage rises.
4 COMP input An opto-coupler sources current into COMP, where zero input current gives maximum duty cycle and 1mA reduces the duty cycle to zero.
5 RT passive An external resistor between RT and AGND sets the free-running oscillator frequency, with RT normally regulated at 2V.
6 AGND power_in Analog ground, to be connected directly to power ground.
7 CS input The current sense input uses a 600mV fast peak cycle-by-cycle limit comparator and a 500mV average current limit comparator, with a 50ns blanking time.
8 SS passive An internal 110µA current source charges the external soft-start capacitor, which is reduced to 1.2µA during a current limit restart sequence.
9 DLY passive An external resistor to ground sets the non-overlap time between HO and SR1 and between LO and SR2.
10 RES passive A 22µA current charges the restart timer capacitor, and when it reaches 2.5V the soft-start capacitor is fully discharged.
11 HB power_in An external diode from VCC to HB and an external capacitor from HS to HB power the HO gate driver.
12 HS passive The switch node is the connection common to the transformer and both power switches, and provides the return path for the HO gate driver.
13 HO output The high side gate drive output is capable of sinking 2A peak current.
14 LO output The low side gate drive output is capable of sinking 2A peak current.
15 PGND power_in Power ground, to be connected directly to analog ground.
16 VCC power_out The high voltage start-up regulator output is regulated to 7.6V, and the start-up regulator shuts down when an auxiliary winding raises the voltage above the setpoint.
17 SR2 output The synchronous rectifier driver output is capable of 0.5A peak current.
18 SR1 output The synchronous rectifier driver output is capable of 0.5A peak current.
19 REF power_out The 5V reference output has a typical output current of 20mA and should be locally decoupled with a 0.1µF capacitor.
20 VIN power_in The input to the start-up regulator has an operating input range of 13V to 100V with transient capability to 105V.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-20-EP
Category Power Supply Chip
Pins 21

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN to GND -0.3 105 V 5
HS to GND -1 105 V 5
HB to GND -0.3 118 V 5
HB to HS -0.3 18 V 5
VCC to GND -0.3 16 V 5
CS, RT, DLY, SS to GND -0.3 5.5 V 5
All other inputs to GND -0.3 7 V 5
COMP Input Current 10 mA 5
ACL Input Current 500 µA 5
ESD Rating Human Body Model 2 kV Human body model 5
Storage Temperature Range -65 150 °C 5
Junction Temperature 150 °C 5
VIN Voltage VIN 13 105 V 5
External Voltage Applied to VCC VCC 8 15 V 5
Operating Junction Temperature TJ -40 125 °C 5
VCC voltage VVCC 7.3 7.6 7.9 V IVCC = 10mA 5
VCC current limit IVCC(LIM) 57 65 mA VVCC = 7V 5
VCC decreasing (under-voltage threshold) 5.5 6.2 6.9 V VCC, PGND 5
Startup regulator current IVIN 35 70 µA VIN = 90V, UVLO = 0V 5
Supply current into VCC from external source 4 6 mA Outputs & COMP open, VVCC = 10V, Outputs Switching 5
REF Voltage VREF 4.85 5 5.15 V IREF = 0mA 5
REF Voltage Regulation 25 50 mV IREF = 0 to 10mA 5
REF Current Limit 15 20 mA REF = 4.5V 5
Under-voltage threshold VUVLO 1.212 1.25 1.288 V 5
Hysteresis current IUVLO 19 23 27 µA UVLO pin sourcing 5
Current Limit Threshold for Peak cycle-by-cycle limiting VCS(th1) 0.57 0.6 0.63 V 6
Current Limit Threshold for Average current limiting VCS(th2) 0.475 0.5 0.525 V 6
CS sink impedance (clocked) 36 65 Ω Internal FET on resistance 6
Source Current 7.3 9.3 11.3 mA VCS > 0.525 6
RES Threshold VRES 2.4 2.5 2.6 V 6
Charge source current 16 22 28 µA VRES = 1.5V 6
Discharge sink current 8 12 16 µA VRES = 1V 6
Charging current in normal operation ISS 80 110 140 µA VSS = 0 6
Charging current during a hiccup mode restart 0.6 1.2 1.8 µA VSS = 0 6
Frequency 1 (at HO, half oscillator frequency) FSW1 180 200 220 kHz RRT = 25 kΩ 6
Frequency 2 (at HO, half oscillator frequency) FSW2 430 500 570 kHz RRT = 8.76 kΩ 6
Input Sync threshold 2.5 3 3.4 V 6
SS to RAMP offset VPWM-OS 0.7 1 1.2 V 6
Output high voltage 0.25 0.5 V IOUT = 50mA, VHB - VHO, VVCC - VLO 6
Output low voltage 0.2 0.5 V IOUT = 100 mA 6
RAMP comparator threshold 2 2.2 2.4 V COMP current = 0 7
Output high voltage (SR1, SR2) 0.1 0.25 V IOUT = 10mA, VVCC - VSR1, VVCC - VSR2 7
Output low voltage (SR1, SR2) 0.07 0.2 V IOUT = 20 mA (sink) 7
T1 Deadtime, SR2 falling to LO rising T1 65 88 118 ns RDLY = 27.4k 7
T2 Deadtime, LO falling to SR2 rising T2 20 29 42 ns RDLY = 27.4k 7
Junction to ambient, HTSSOP-20 package θJA 40 °C/W 0 LFPM Air Flow 7
Junction to Case (EP), HTSSOP-20 package θJC 4 °C/W 7

CAD (KiCad official)

  • Symbol: LM5039MHX
  • Footprint: Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm
  • 3D model: HTSSOP-20-EP (KiCad packages3D, STEP)
  • 3D model files: lm5039mhx-etched.step / lm5039mhx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm5039mhx.step / lm5039mhx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 a662d4b1f77df0cf, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF