Generated by kicad-footprint-generator · KiCad file format 20260206
LM5039MHX
Texas Instruments · DC-DC Controllers · HTSSOP-20-EP
LM5039MHX from Texas Instruments, in a HTSSOP-20-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RAMP | input | An external RC circuit from VIN sets the ramp slope, and the pin is discharged at the end of every cycle by an internal FET. |
| 2 | UVLO | input | An external voltage divider sets the shutdown and standby levels, with VCC and REF enabled at the 0.4V threshold and SS released at the 1.25V threshold. |
| 3 | ACL | passive | A capacitor from ACL to GND integrates the average current limit and terminates the PWM cycle as the ACL pin voltage rises. |
| 4 | COMP | input | An opto-coupler sources current into COMP, where zero input current gives maximum duty cycle and 1mA reduces the duty cycle to zero. |
| 5 | RT | passive | An external resistor between RT and AGND sets the free-running oscillator frequency, with RT normally regulated at 2V. |
| 6 | AGND | power_in | Analog ground, to be connected directly to power ground. |
| 7 | CS | input | The current sense input uses a 600mV fast peak cycle-by-cycle limit comparator and a 500mV average current limit comparator, with a 50ns blanking time. |
| 8 | SS | passive | An internal 110µA current source charges the external soft-start capacitor, which is reduced to 1.2µA during a current limit restart sequence. |
| 9 | DLY | passive | An external resistor to ground sets the non-overlap time between HO and SR1 and between LO and SR2. |
| 10 | RES | passive | A 22µA current charges the restart timer capacitor, and when it reaches 2.5V the soft-start capacitor is fully discharged. |
| 11 | HB | power_in | An external diode from VCC to HB and an external capacitor from HS to HB power the HO gate driver. |
| 12 | HS | passive | The switch node is the connection common to the transformer and both power switches, and provides the return path for the HO gate driver. |
| 13 | HO | output | The high side gate drive output is capable of sinking 2A peak current. |
| 14 | LO | output | The low side gate drive output is capable of sinking 2A peak current. |
| 15 | PGND | power_in | Power ground, to be connected directly to analog ground. |
| 16 | VCC | power_out | The high voltage start-up regulator output is regulated to 7.6V, and the start-up regulator shuts down when an auxiliary winding raises the voltage above the setpoint. |
| 17 | SR2 | output | The synchronous rectifier driver output is capable of 0.5A peak current. |
| 18 | SR1 | output | The synchronous rectifier driver output is capable of 0.5A peak current. |
| 19 | REF | power_out | The 5V reference output has a typical output current of 20mA and should be locally decoupled with a 0.1µF capacitor. |
| 20 | VIN | power_in | The input to the start-up regulator has an operating input range of 13V to 100V with transient capability to 105V. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-20-EP |
| Category | Power Supply Chip |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN to GND | -0.3 | 105 | V | 5 | |||
| HS to GND | -1 | 105 | V | 5 | |||
| HB to GND | -0.3 | 118 | V | 5 | |||
| HB to HS | -0.3 | 18 | V | 5 | |||
| VCC to GND | -0.3 | 16 | V | 5 | |||
| CS, RT, DLY, SS to GND | -0.3 | 5.5 | V | 5 | |||
| All other inputs to GND | -0.3 | 7 | V | 5 | |||
| COMP Input Current | 10 | mA | 5 | ||||
| ACL Input Current | 500 | µA | 5 | ||||
| ESD Rating Human Body Model | 2 | kV | Human body model | 5 | |||
| Storage Temperature Range | -65 | 150 | °C | 5 | |||
| Junction Temperature | 150 | °C | 5 | ||||
| VIN Voltage | VIN | 13 | 105 | V | 5 | ||
| External Voltage Applied to VCC | VCC | 8 | 15 | V | 5 | ||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 5 | ||
| VCC voltage | VVCC | 7.3 | 7.6 | 7.9 | V | IVCC = 10mA | 5 |
| VCC current limit | IVCC(LIM) | 57 | 65 | mA | VVCC = 7V | 5 | |
| VCC decreasing (under-voltage threshold) | 5.5 | 6.2 | 6.9 | V | VCC, PGND | 5 | |
| Startup regulator current | IVIN | 35 | 70 | µA | VIN = 90V, UVLO = 0V | 5 | |
| Supply current into VCC from external source | 4 | 6 | mA | Outputs & COMP open, VVCC = 10V, Outputs Switching | 5 | ||
| REF Voltage | VREF | 4.85 | 5 | 5.15 | V | IREF = 0mA | 5 |
| REF Voltage Regulation | 25 | 50 | mV | IREF = 0 to 10mA | 5 | ||
| REF Current Limit | 15 | 20 | mA | REF = 4.5V | 5 | ||
| Under-voltage threshold | VUVLO | 1.212 | 1.25 | 1.288 | V | 5 | |
| Hysteresis current | IUVLO | 19 | 23 | 27 | µA | UVLO pin sourcing | 5 |
| Current Limit Threshold for Peak cycle-by-cycle limiting | VCS(th1) | 0.57 | 0.6 | 0.63 | V | 6 | |
| Current Limit Threshold for Average current limiting | VCS(th2) | 0.475 | 0.5 | 0.525 | V | 6 | |
| CS sink impedance (clocked) | 36 | 65 | Ω | Internal FET on resistance | 6 | ||
| Source Current | 7.3 | 9.3 | 11.3 | mA | VCS > 0.525 | 6 | |
| RES Threshold | VRES | 2.4 | 2.5 | 2.6 | V | 6 | |
| Charge source current | 16 | 22 | 28 | µA | VRES = 1.5V | 6 | |
| Discharge sink current | 8 | 12 | 16 | µA | VRES = 1V | 6 | |
| Charging current in normal operation | ISS | 80 | 110 | 140 | µA | VSS = 0 | 6 |
| Charging current during a hiccup mode restart | 0.6 | 1.2 | 1.8 | µA | VSS = 0 | 6 | |
| Frequency 1 (at HO, half oscillator frequency) | FSW1 | 180 | 200 | 220 | kHz | RRT = 25 kΩ | 6 |
| Frequency 2 (at HO, half oscillator frequency) | FSW2 | 430 | 500 | 570 | kHz | RRT = 8.76 kΩ | 6 |
| Input Sync threshold | 2.5 | 3 | 3.4 | V | 6 | ||
| SS to RAMP offset | VPWM-OS | 0.7 | 1 | 1.2 | V | 6 | |
| Output high voltage | 0.25 | 0.5 | V | IOUT = 50mA, VHB - VHO, VVCC - VLO | 6 | ||
| Output low voltage | 0.2 | 0.5 | V | IOUT = 100 mA | 6 | ||
| RAMP comparator threshold | 2 | 2.2 | 2.4 | V | COMP current = 0 | 7 | |
| Output high voltage (SR1, SR2) | 0.1 | 0.25 | V | IOUT = 10mA, VVCC - VSR1, VVCC - VSR2 | 7 | ||
| Output low voltage (SR1, SR2) | 0.07 | 0.2 | V | IOUT = 20 mA (sink) | 7 | ||
| T1 Deadtime, SR2 falling to LO rising | T1 | 65 | 88 | 118 | ns | RDLY = 27.4k | 7 |
| T2 Deadtime, LO falling to SR2 rising | T2 | 20 | 29 | 42 | ns | RDLY = 27.4k | 7 |
| Junction to ambient, HTSSOP-20 package | θJA | 40 | °C/W | 0 LFPM Air Flow | 7 | ||
| Junction to Case (EP), HTSSOP-20 package | θJC | 4 | °C/W | 7 |
CAD (KiCad official)
- Symbol:
LM5039MHX - Footprint:
Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm - 3D model: HTSSOP-20-EP (KiCad packages3D, STEP)
- 3D model files:
lm5039mhx-etched.step/lm5039mhx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5039mhx.step/lm5039mhx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
a662d4b1f77df0cf, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).