main
History Download
Ray Publish 0.1.0 ab79ca6

LM5035CSQX

Texas Instruments · DC-DC Controllers · WQFN-24-EP(4x5)

LM5035CSQX from Texas Instruments, in a WQFN-24-EP(4x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connection, no electrical contact.
2 OVP input Line overvoltage protection input with a 1.25-V threshold, set by an external divider from the power source, with hysteresis from an internal 23-µA current source.
3 COMP bidirectional Input to the pulse width modulator from an external opto-coupler that sources current into an internal NPN current mirror; duty cycle is maximum at zero input current and 1 mA reduces it to zero.
4 RT input Oscillator frequency control and sync clock input, normally biased at 2 V, with an external resistor to AGND setting the frequency and an external clock higher than the free-running frequency able to synchronize it.
5 AGND power_in Analog ground, to be connected directly to power ground.
6 CS input Current sense input that terminates the output pulse (cycle-by-cycle current limit) when it exceeds 0.25 V, with an internal switch holding it low for 50 ns after HO or LO switches high.
7 SS input Soft-start input where an internal 110-µA current source charges an external capacitor, reduced to 1.2 µA during a current limit restart sequence.
8 DLY input Timing programming pin where an external resistor to ground sets the non-overlap time of HO to SR1 and LO to SR2.
9 RES input Restart timer pin that receives a 22-µA current into its capacitor on cycle-by-cycle current limit, and at 2.5 V the soft-start capacitor is discharged and released with a 1.2-µA pullup.
10 NC unconnected No connection, no electrical contact.
11 HB bidirectional Boost voltage supply for the HO driver, requiring an external diode from VCC and an external capacitor from HS to HB.
12 HS bidirectional Switch node connection common to the transformer and both power switches, providing the return path for the HO gate driver.
13 HO output High-side PWM gate driver output, capable of 2-A peak current.
14 LO output Low-side PWM gate driver output, capable of 2-A peak current.
15 PGND power_in Power ground, to be connected directly to analog ground.
16 VCC power_in Output of the high-voltage start-up regulator, regulated to 7.6 V, which shuts down if an auxiliary winding raises this pin above the setpoint.
17 SR2 output Synchronous rectifier driver output controlling the synchronous FET gate, capable of 0.5-A peak current.
18 SR1 output Synchronous rectifier driver output controlling the synchronous FET gate, capable of 0.5-A peak current.
19 REF power_out 5-V reference output with 20 mA maximum output current, locally decoupled with a 0.1-µF capacitor.
20 NC unconnected No connection, no electrical contact.
21 VIN power_in Input to the start-up regulator with an operating input range of 13 V to 100 V and transient capability to 105 V.
22 NC unconnected No connection, no electrical contact.
23 RAMP input Modulator ramp signal input where an external RC circuit from VIN sets the ramp slope, discharged each cycle by an internal FET.
24 UVLO input Line undervoltage lockout input that enables the VCC and REF regulators at 0.4 V and releases SS at 1.25 V, with hysteresis from an internal 23-µA current sink.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-24-EP(4x5)
Category Power Supply Chip
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN to GND -0.3 105 V 6
HS to GND -1 105 V 6
HB to GND -0.3 118 V 6
HB to HS -0.3 18 V 6
VCC to GND -0.3 16 V 6
RT, DLY to GND -0.3 5.5 V 6
COMP input current 10 mA 6
CS 1 V 6
All other inputs to GND -0.3 7 V 6
Junction temperature 150 °C 6
Storage temperature -65 150 °C 6
ESD HBM V(ESD) -1500 1500 V Human-body model per ANSI/ESDA/JEDEC JS-001 6
ESD CDM V(ESD) -250 250 V Charged-device model per JESD22-C101 6
VIN voltage VIN 13 105 V 6
External voltage applied to VCC VCC 8 15 V 6
Operating junction temperature TJ -40 125 °C 6
Junction-to-ambient thermal resistance RθJA 31.3 °C/W NHZ (WQFN) 24 pins 6
Junction-to-case (top) thermal resistance RθJC(top) 25 °C/W NHZ (WQFN) 24 pins 6
Junction-to-board thermal resistance RθJB 9.9 °C/W NHZ (WQFN) 24 pins 6
Junction-to-top characterization parameter ψJT 0.2 °C/W NHZ (WQFN) 24 pins 6
Junction-to-board characterization parameter ψJB 10.1 °C/W NHZ (WQFN) 24 pins 6
Junction-to-case (bottom) thermal resistance RθJC(bot) 1.6 °C/W NHZ (WQFN) 24 pins 6
VCC voltage VVCC 7.3 7.6 7.9 V IVCC = 10 mA, TJ = -40°C to 125°C (typ at 25°C) 7
VCC current limit IVCC(LIM) 58 mA VVCC = 7 V, TJ = -40°C to 125°C 7
VCC undervoltage threshold (VCC increasing), delta from regulation setpoint VVCCUV 0.1 0.2 V VIN = VCC; typ TJ = 25°C, max TJ = -40°C to 125°C 7
VCC undervoltage threshold (VCC decreasing) VVCCUV 5.5 6.2 6.9 V VCC, PGND; typ TJ = 25°C, limits TJ = -40°C to 125°C 7
Start-up regulator current IVIN 30 70 µA VIN = 90 V, UVLO = 0 V; typ TJ = 25°C, max TJ = -40°C to 125°C 7
Supply current into VCC from external source 4 6 mA Outputs and COMP open, VVCC = 10 V, Outputs Switching; typ TJ = 25°C, max TJ = -40°C to 125°C 7
REF voltage VREF 4.85 5 5.15 V IREF = 0 mA, TJ = -40°C to 125°C (typ at 25°C) 7
REF voltage regulation 25 50 mV IREF = 0 to 10 mA; typ TJ = 25°C, max TJ = -40°C to 125°C 7
REF current limit 15 20 mA REF = 4.5 V; typ TJ = 25°C, min TJ = -40°C to 125°C 7
Undervoltage threshold VUVLO 1.212 1.25 1.288 V TJ = -40°C to 125°C (typ at 25°C) 7
UVLO hysteresis current IUVLO 19 23 27 µA UVLO pin sinking, TJ = -40°C to 125°C (typ at 25°C) 7
Overvoltage threshold VOVP 1.212 1.25 1.288 V TJ = -40°C to 125°C (typ at 25°C) 7
OVP hysteresis current IOVP 19 23 27 µA OVP pin sourcing, TJ = -40°C to 125°C (typ at 25°C) 7
Current limit threshold VCS 0.288 0.25 0.272 V TJ = -40°C to 125°C (typ at 25°C); min/max as printed 7
CS sink impedance (clocked) 32 60 Ω Internal FET sink impedance; typ TJ = 25°C, max TJ = -40°C to 125°C 7
RES threshold VRES 2.4 2.5 2.6 V TJ = -40°C to 125°C (typ at 25°C) 8
RES charge source current 16 22 28 µA VRES = 1.5 V, TJ = -40°C to 125°C (typ at 25°C) 8
RES discharge sink current 8 12 16 µA VRES = 1 V, TJ = -40°C to 125°C (typ at 25°C) 8
SS charging current in normal operation ISS 80 110 140 µA VSS = 0, TJ = -40°C to 125°C (typ at 25°C) 8
SS charging current during hiccup mode restart ISS 0.6 1.2 1.8 µA VSS = 0, TJ = -40°C to 125°C (typ at 25°C) 8
Frequency 1 (at HO) FSW1 185 200 215 kHz RRT = 15 kΩ, TJ = -40°C to 125°C (typ at 25°C) 8
Frequency 1 (at HO), second row FSW1 180 220 kHz RRT = 15 kΩ, TJ = -40°C to 125°C 8
Frequency 2 (at HO) FSW2 430 500 570 kHz RRT = 5.49 kΩ, TJ = -40°C to 125°C (typ at 25°C) 8
Input sync threshold 2.5 3 3.4 V TJ = -40°C to 125°C (typ at 25°C) 8
SS to RAMP offset VPWM-OS 0.7 1 1.2 V TJ = -40°C to 125°C (typ at 25°C) 8
Output high voltage (HO, LO) 0.25 0.5 V IOUT = 50 mA, VHB - VHO, VVCC - VLO; typ TJ = 25°C, max TJ = -40°C to 125°C 8
Output low voltage (HO, LO) 0.2 0.5 V IOUT = 100 mA; typ TJ = 25°C, max TJ = -40°C to 125°C 8
RAMP comparator threshold 2.4 2.5 2.6 V COMP current = 0, TJ = -40°C to 125°C (typ at 25°C) 9
SR output high voltage 0.1 0.25 V IOUT = 5 mA, VREF - VSR1, VREF - VSR2; typ TJ = 25°C, max TJ = -40°C to 125°C 9
SR output low voltage 0.08 0.2 V IOUT = 10 mA (sink); typ TJ = 25°C, max TJ = -40°C to 125°C 9
T1 dead time T1 68 86 120 ns RDLY = 27.4 k, TJ = -40°C to 125°C (typ at 25°C) 9
T2 dead time T2 15 26 39 ns RDLY = 27.4 k, TJ = -40°C to 125°C (typ at 25°C) 9
Shutdown temperature TSD 165 °C 9
Thermal shutdown hysteresis 20 °C 9

CAD (KiCad official)

  • Symbol: LM5035CSQX
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm
  • 3D model: WQFN-24-EP(4x5) (KiCad packages3D, STEP)
  • 3D model files: lm5035csqx-etched.step / lm5035csqx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm5035csqx.step / lm5035csqx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (43 pp, sha256 7a684235714b154c, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF