Generated by kicad-footprint-generator · KiCad file format 20260206
LM5035CSQX
Texas Instruments · DC-DC Controllers · WQFN-24-EP(4x5)
LM5035CSQX from Texas Instruments, in a WQFN-24-EP(4x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection, no electrical contact. |
| 2 | OVP | input | Line overvoltage protection input with a 1.25-V threshold, set by an external divider from the power source, with hysteresis from an internal 23-µA current source. |
| 3 | COMP | bidirectional | Input to the pulse width modulator from an external opto-coupler that sources current into an internal NPN current mirror; duty cycle is maximum at zero input current and 1 mA reduces it to zero. |
| 4 | RT | input | Oscillator frequency control and sync clock input, normally biased at 2 V, with an external resistor to AGND setting the frequency and an external clock higher than the free-running frequency able to synchronize it. |
| 5 | AGND | power_in | Analog ground, to be connected directly to power ground. |
| 6 | CS | input | Current sense input that terminates the output pulse (cycle-by-cycle current limit) when it exceeds 0.25 V, with an internal switch holding it low for 50 ns after HO or LO switches high. |
| 7 | SS | input | Soft-start input where an internal 110-µA current source charges an external capacitor, reduced to 1.2 µA during a current limit restart sequence. |
| 8 | DLY | input | Timing programming pin where an external resistor to ground sets the non-overlap time of HO to SR1 and LO to SR2. |
| 9 | RES | input | Restart timer pin that receives a 22-µA current into its capacitor on cycle-by-cycle current limit, and at 2.5 V the soft-start capacitor is discharged and released with a 1.2-µA pullup. |
| 10 | NC | unconnected | No connection, no electrical contact. |
| 11 | HB | bidirectional | Boost voltage supply for the HO driver, requiring an external diode from VCC and an external capacitor from HS to HB. |
| 12 | HS | bidirectional | Switch node connection common to the transformer and both power switches, providing the return path for the HO gate driver. |
| 13 | HO | output | High-side PWM gate driver output, capable of 2-A peak current. |
| 14 | LO | output | Low-side PWM gate driver output, capable of 2-A peak current. |
| 15 | PGND | power_in | Power ground, to be connected directly to analog ground. |
| 16 | VCC | power_in | Output of the high-voltage start-up regulator, regulated to 7.6 V, which shuts down if an auxiliary winding raises this pin above the setpoint. |
| 17 | SR2 | output | Synchronous rectifier driver output controlling the synchronous FET gate, capable of 0.5-A peak current. |
| 18 | SR1 | output | Synchronous rectifier driver output controlling the synchronous FET gate, capable of 0.5-A peak current. |
| 19 | REF | power_out | 5-V reference output with 20 mA maximum output current, locally decoupled with a 0.1-µF capacitor. |
| 20 | NC | unconnected | No connection, no electrical contact. |
| 21 | VIN | power_in | Input to the start-up regulator with an operating input range of 13 V to 100 V and transient capability to 105 V. |
| 22 | NC | unconnected | No connection, no electrical contact. |
| 23 | RAMP | input | Modulator ramp signal input where an external RC circuit from VIN sets the ramp slope, discharged each cycle by an internal FET. |
| 24 | UVLO | input | Line undervoltage lockout input that enables the VCC and REF regulators at 0.4 V and releases SS at 1.25 V, with hysteresis from an internal 23-µA current sink. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-24-EP(4x5) |
| Category | Power Supply Chip |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN to GND | -0.3 | 105 | V | 6 | |||
| HS to GND | -1 | 105 | V | 6 | |||
| HB to GND | -0.3 | 118 | V | 6 | |||
| HB to HS | -0.3 | 18 | V | 6 | |||
| VCC to GND | -0.3 | 16 | V | 6 | |||
| RT, DLY to GND | -0.3 | 5.5 | V | 6 | |||
| COMP input current | 10 | mA | 6 | ||||
| CS | 1 | V | 6 | ||||
| All other inputs to GND | -0.3 | 7 | V | 6 | |||
| Junction temperature | 150 | °C | 6 | ||||
| Storage temperature | -65 | 150 | °C | 6 | |||
| ESD HBM | V(ESD) | -1500 | 1500 | V | Human-body model per ANSI/ESDA/JEDEC JS-001 | 6 | |
| ESD CDM | V(ESD) | -250 | 250 | V | Charged-device model per JESD22-C101 | 6 | |
| VIN voltage | VIN | 13 | 105 | V | 6 | ||
| External voltage applied to VCC | VCC | 8 | 15 | V | 6 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 6 | ||
| Junction-to-ambient thermal resistance | RθJA | 31.3 | °C/W | NHZ (WQFN) 24 pins | 6 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 25 | °C/W | NHZ (WQFN) 24 pins | 6 | ||
| Junction-to-board thermal resistance | RθJB | 9.9 | °C/W | NHZ (WQFN) 24 pins | 6 | ||
| Junction-to-top characterization parameter | ψJT | 0.2 | °C/W | NHZ (WQFN) 24 pins | 6 | ||
| Junction-to-board characterization parameter | ψJB | 10.1 | °C/W | NHZ (WQFN) 24 pins | 6 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 1.6 | °C/W | NHZ (WQFN) 24 pins | 6 | ||
| VCC voltage | VVCC | 7.3 | 7.6 | 7.9 | V | IVCC = 10 mA, TJ = -40°C to 125°C (typ at 25°C) | 7 |
| VCC current limit | IVCC(LIM) | 58 | mA | VVCC = 7 V, TJ = -40°C to 125°C | 7 | ||
| VCC undervoltage threshold (VCC increasing), delta from regulation setpoint | VVCCUV | 0.1 | 0.2 | V | VIN = VCC; typ TJ = 25°C, max TJ = -40°C to 125°C | 7 | |
| VCC undervoltage threshold (VCC decreasing) | VVCCUV | 5.5 | 6.2 | 6.9 | V | VCC, PGND; typ TJ = 25°C, limits TJ = -40°C to 125°C | 7 |
| Start-up regulator current | IVIN | 30 | 70 | µA | VIN = 90 V, UVLO = 0 V; typ TJ = 25°C, max TJ = -40°C to 125°C | 7 | |
| Supply current into VCC from external source | 4 | 6 | mA | Outputs and COMP open, VVCC = 10 V, Outputs Switching; typ TJ = 25°C, max TJ = -40°C to 125°C | 7 | ||
| REF voltage | VREF | 4.85 | 5 | 5.15 | V | IREF = 0 mA, TJ = -40°C to 125°C (typ at 25°C) | 7 |
| REF voltage regulation | 25 | 50 | mV | IREF = 0 to 10 mA; typ TJ = 25°C, max TJ = -40°C to 125°C | 7 | ||
| REF current limit | 15 | 20 | mA | REF = 4.5 V; typ TJ = 25°C, min TJ = -40°C to 125°C | 7 | ||
| Undervoltage threshold | VUVLO | 1.212 | 1.25 | 1.288 | V | TJ = -40°C to 125°C (typ at 25°C) | 7 |
| UVLO hysteresis current | IUVLO | 19 | 23 | 27 | µA | UVLO pin sinking, TJ = -40°C to 125°C (typ at 25°C) | 7 |
| Overvoltage threshold | VOVP | 1.212 | 1.25 | 1.288 | V | TJ = -40°C to 125°C (typ at 25°C) | 7 |
| OVP hysteresis current | IOVP | 19 | 23 | 27 | µA | OVP pin sourcing, TJ = -40°C to 125°C (typ at 25°C) | 7 |
| Current limit threshold | VCS | 0.288 | 0.25 | 0.272 | V | TJ = -40°C to 125°C (typ at 25°C); min/max as printed | 7 |
| CS sink impedance (clocked) | 32 | 60 | Ω | Internal FET sink impedance; typ TJ = 25°C, max TJ = -40°C to 125°C | 7 | ||
| RES threshold | VRES | 2.4 | 2.5 | 2.6 | V | TJ = -40°C to 125°C (typ at 25°C) | 8 |
| RES charge source current | 16 | 22 | 28 | µA | VRES = 1.5 V, TJ = -40°C to 125°C (typ at 25°C) | 8 | |
| RES discharge sink current | 8 | 12 | 16 | µA | VRES = 1 V, TJ = -40°C to 125°C (typ at 25°C) | 8 | |
| SS charging current in normal operation | ISS | 80 | 110 | 140 | µA | VSS = 0, TJ = -40°C to 125°C (typ at 25°C) | 8 |
| SS charging current during hiccup mode restart | ISS | 0.6 | 1.2 | 1.8 | µA | VSS = 0, TJ = -40°C to 125°C (typ at 25°C) | 8 |
| Frequency 1 (at HO) | FSW1 | 185 | 200 | 215 | kHz | RRT = 15 kΩ, TJ = -40°C to 125°C (typ at 25°C) | 8 |
| Frequency 1 (at HO), second row | FSW1 | 180 | 220 | kHz | RRT = 15 kΩ, TJ = -40°C to 125°C | 8 | |
| Frequency 2 (at HO) | FSW2 | 430 | 500 | 570 | kHz | RRT = 5.49 kΩ, TJ = -40°C to 125°C (typ at 25°C) | 8 |
| Input sync threshold | 2.5 | 3 | 3.4 | V | TJ = -40°C to 125°C (typ at 25°C) | 8 | |
| SS to RAMP offset | VPWM-OS | 0.7 | 1 | 1.2 | V | TJ = -40°C to 125°C (typ at 25°C) | 8 |
| Output high voltage (HO, LO) | 0.25 | 0.5 | V | IOUT = 50 mA, VHB - VHO, VVCC - VLO; typ TJ = 25°C, max TJ = -40°C to 125°C | 8 | ||
| Output low voltage (HO, LO) | 0.2 | 0.5 | V | IOUT = 100 mA; typ TJ = 25°C, max TJ = -40°C to 125°C | 8 | ||
| RAMP comparator threshold | 2.4 | 2.5 | 2.6 | V | COMP current = 0, TJ = -40°C to 125°C (typ at 25°C) | 9 | |
| SR output high voltage | 0.1 | 0.25 | V | IOUT = 5 mA, VREF - VSR1, VREF - VSR2; typ TJ = 25°C, max TJ = -40°C to 125°C | 9 | ||
| SR output low voltage | 0.08 | 0.2 | V | IOUT = 10 mA (sink); typ TJ = 25°C, max TJ = -40°C to 125°C | 9 | ||
| T1 dead time | T1 | 68 | 86 | 120 | ns | RDLY = 27.4 k, TJ = -40°C to 125°C (typ at 25°C) | 9 |
| T2 dead time | T2 | 15 | 26 | 39 | ns | RDLY = 27.4 k, TJ = -40°C to 125°C (typ at 25°C) | 9 |
| Shutdown temperature | TSD | 165 | °C | 9 | |||
| Thermal shutdown hysteresis | 20 | °C | 9 |
CAD (KiCad official)
- Symbol:
LM5035CSQX - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm - 3D model: WQFN-24-EP(4x5) (KiCad packages3D, STEP)
- 3D model files:
lm5035csqx-etched.step/lm5035csqx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5035csqx.step/lm5035csqx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
7a684235714b154c, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).