main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm5033sd: viewers · Ray
lm5033sd-etched.glb Publish 0.1.0 · Ray
lm5033sd-etched.step lm5033sd: factory component page (tier=mfr) · Ray
lm5033sd-hero.glb lm5033sd: hero GLB from the etched model (keeps the MPN mark) · Ray
lm5033sd-hero.overlay.json Publish 0.1.0 · Ray
lm5033sd.glb Publish 0.1.0 · Ray
lm5033sd.kicad_mod Publish 0.1.0 · Ray
lm5033sd.kicad_sym Publish 0.1.0 · Ray
lm5033sd.lbr Publish 0.1.0 · Ray
lm5033sd.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 11 pins · Ray

LM5033SD

Texas Instruments · DC-DC Controllers · WSON-10-EP(4x4)

LM5033SD from Texas Instruments, in a WSON-10-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input to the start-up regulator, with input range from 15 V to 90 V and transient capability to 100 V.
2 REF output Sink-only output that requires an external pullup resistor and can be used as a 2.5-V precision output reference for external circuitry.
3 COMP input Feedback to the inverting input of the PWM comparator through a 3:1 divider, with duty cycle increasing as pin voltage increases and an internal 5-kΩ pullup to 5.2 V.
4 VCC power_in 9.6-V output from the internal high-voltage series pass regulator; an external 10 V to 15 V can be applied to shut down the internal regulator, and an internal diode connects VCC to VIN.
5 OUT1 output Alternating output gate driver that can source and sink 1.5 A.
6 OUT2 output Alternating output gate driver that can source and sink 1.5 A.
7 GND power_in Ground connection; external ground connections must be made with care for optimum performance.
8 CS input Current sense input for current limit detection; if the voltage exceeds 0.5 V the outputs are disabled and the SS pin is discharged to ground.
9 RT/SYNC input Oscillator timing resistor pin where an external resistor to ground sets the frequency, and it also accepts AC-coupled synchronization pulses from an external source.
10 SS input Soft-start pin where an internal 10-µA current source and external capacitor set the timing, and which can be pulled below 0.5 V to disable the output drivers.
11 EP passive Exposed die attach pad on the WSON package that must be connected to a PCB thermal pad at ground potential.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-10-EP(4x4)
Category Power Supply Chip
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC voltage VCCReg 9.2 9.6 10 V VCC is open 5
VCC current limit ICC(OUT) 20 34 mA OUT1 and OUT2 disabled, extended supply to VCC disconnected 5
Startup regulator current into VIN IIN 150 500 µA Normal operation, VIN = 90 V 5
UVT hysteresis (decreasing VCC) UVT 2.3 2.8 3.3 V 5
Supply current from external source to VCC ICC(IN) 2 3 mA VSS = 0 V 5
Reference output voltage VREF 2.44 2.5 2.56 V REF sink current = 5 mA 5
REF current sink capability 5 13 mA 5
CS threshold voltage 0.45 0.5 0.55 V 5
CS current sink capability (clocked) 3 6 mA VCS ≤ 0.3 V 5
Soft-start current source 7 10 13 µA 5
Soft-start to COMP offset 0.25 0.5 0.75 V 5
Internal frequency FS1 175 200 225 kHz RT = 26.7 kΩ 5
COMP open circuit voltage 4.2 5.2 6.2 V 5
COMP short circuit current 0.6 1.1 1.5 mA VCOMP = 0 V 5
Deadtime tD 85 135 185 ns CLOAD = 0 at OUT1 and OUT2, time measured from 10% of falling output to 10% of rising output 5
Output low voltage 0.25 0.75 V IOUT = 100 mA (sink) 5
VIN to GND VIN -0.3 100 V 4
VCC to GND VCC -0.3 16 V 4
RT/SYNC to GND -0.3 5.5 V 4
COMP, CS, and SS to GND -0.3 7 V 4
Maximum junction temperature TJ(MAX) 150 °C 4
Storage temperature Tstg -65 150 °C 4
ESD HBM V(ESD) -2000 2000 V Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 4
Input voltage VIN 15 99 V 4
Operating junction temperature TJ -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 38.1 °C/W DPR (WSON) 10 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 36.7 °C/W DPR (WSON) 10 pins 4
Junction-to-board thermal resistance RθJB 15.2 °C/W DPR (WSON) 10 pins 4
Junction-to-top characterization parameter ψJT 0.3 °C/W DPR (WSON) 10 pins 4
Junction-to-board characterization parameter ψJB 15.5 °C/W DPR (WSON) 10 pins 4
Junction-to-case (bottom) thermal resistance RθJC(bot) 4.7 °C/W DPR (WSON) 10 pins 4
CS delay to output 30 ns VCS taken from zero to 0.6 V, time for VOUT1 or VOUT2 to fall to 90% of VCC, CLOAD = 0 at OUT1 and OUT2 5
Internal frequency FS2 600 kHz RT = 8.2 kΩ 5
Rise time 16 ns CLOAD = 1 nF 5
Fall time 16 ns CLOAD = 1 nF 5
Shutdown temperature tSD 165 °C 5
Shutdown temperature hysteresis 15 °C 5

CAD (KiCad official)

  • Symbol: LM5033SD
  • Footprint: Package_SON:WSON-10-1EP_4x4mm_P0.8mm_EP2.6x3mm
  • 3D model: WSON-10-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: lm5033sd-etched.step / lm5033sd-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm5033sd.step / lm5033sd.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (28 pp, sha256 0c354dacbb795bad, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF