main
History Download
Ray Initial commit: component/lm5026mtx 8ada27c

LM5026MTX

Texas Instruments · AC-DC Controllers And Regulators · TSSOP-16

LM5026MTX from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input voltage source to the start-up regulator with operating input range of 13 V to 100 V and transient capability to 105 V.
2 UVLO input Line undervoltage lockout controlled by external voltage divider; enables VCC and REF regulators at 0.4-V threshold and enables SS pin and active mode at 1.25-V threshold.
3 CS input Current sense input for current mode control; exceeding 0.5 V terminates output pulse for cycle-by-cycle current limit; internal switch holds CS low for 100 ns after OUT_A switches high.
4 RES input Restart timer input with external capacitor; 10-µA current source charges capacitor during cycle-by-cycle current limit; 2.5-V threshold triggers soft-start reset and discharge at 1 µA reverting to 50 µA after first pulse.
5 TIME input Gate drive overlap or deadtime control; external RSET resistor to AGND produces in-phase OUT_A and OUT_B pulses with overlap; connection to REF produces out-of-phase pulses with deadtime.
6 REF output 5-V precision reference output with maximum output current of 10 mA; requires local 0.1-µF decoupling capacitor.
7 VCC power_in High voltage start-up regulator output regulated to 7.6 V; supplies power to internal circuitry; auxiliary winding above regulation setpoint disables internal start-up regulator.
8 OUT_A output Main switch PWM gate driver output with 3-A peak sink current capability and compound MOS-Bipolar configuration for superior gate drive characteristics.
9 OUT_B output Active clamp switch gate driver output with 0.5-A peak source and sink current capability; can drive P-Channel or N-Channel clamp switches.
10 PGND power_in Power ground connection; must connect directly to analog ground with short direct connection to AGND to avoid jitter.
11 AGND power_in Analog return ground connection; must connect directly to power ground with short direct connection to PGND to avoid jitter.
12 SS input Soft-start control pin; external capacitor with internal 50-µA current source sets soft-start ramp; current reduced to 1 µA following restart; soft-stop discharge current is 50 µA.
13 COMP input Pulse width modulator input accepting control current from external optocoupler error amplifier; zero input current produces maximum duty cycle while 1 mA reduces duty cycle to zero.
14 RT input Oscillator frequency control normally biased at 2 V; total external resistance connected between RT and AGND sets the internal oscillator frequency.
15 SYNC bidirectional Oscillator synchronization input/output; internal oscillator can synchronize to external clock via pulldown device; multiple LM5026 devices can be synchronized by connecting SYNC pins together.
16 DCL input Maximum duty cycle control; external resistor divider from RT to AGND sets the maximum output duty cycle for OUT_A.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-16
Category Power Management (PMIC)
Pins 16

CAD (KiCad official)

  • Symbol: LM5026MTX
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: lm5026mtx-etched.step / lm5026mtx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm5026mtx.step / lm5026mtx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 521b7e5713589751, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF