← Commit history

Initial commit: component/lm5026mtx

Ray ·8ada27c267 ·
2 files changed +241
README.mdadded+52
@@ -0,0 +1,52 @@+# LM5026MTX++**Texas Instruments** · AC-DC Controllers And Regulators · TSSOP-16++LM5026MTX from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VIN | power_in | Input voltage source to the start-up regulator with operating input range of 13 V to 100 V and transient capability to 105 V. |+| 2 | UVLO | input | Line undervoltage lockout controlled by external voltage divider; enables VCC and REF regulators at 0.4-V threshold and enables SS pin and active mode at 1.25-V threshold. |+| 3 | CS | input | Current sense input for current mode control; exceeding 0.5 V terminates output pulse for cycle-by-cycle current limit; internal switch holds CS low for 100 ns after OUT_A switches high. |+| 4 | RES | input | Restart timer input with external capacitor; 10-µA current source charges capacitor during cycle-by-cycle current limit; 2.5-V threshold triggers soft-start reset and discharge at 1 µA reverting to 50 µA after first pulse. |+| 5 | TIME | input | Gate drive overlap or deadtime control; external RSET resistor to AGND produces in-phase OUT_A and OUT_B pulses with overlap; connection to REF produces out-of-phase pulses with deadtime. |+| 6 | REF | output | 5-V precision reference output with maximum output current of 10 mA; requires local 0.1-µF decoupling capacitor. |+| 7 | VCC | power_in | High voltage start-up regulator output regulated to 7.6 V; supplies power to internal circuitry; auxiliary winding above regulation setpoint disables internal start-up regulator. |+| 8 | OUT_A | output | Main switch PWM gate driver output with 3-A peak sink current capability and compound MOS-Bipolar configuration for superior gate drive characteristics. |+| 9 | OUT_B | output | Active clamp switch gate driver output with 0.5-A peak source and sink current capability; can drive P-Channel or N-Channel clamp switches. |+| 10 | PGND | power_in | Power ground connection; must connect directly to analog ground with short direct connection to AGND to avoid jitter. |+| 11 | AGND | power_in | Analog return ground connection; must connect directly to power ground with short direct connection to PGND to avoid jitter. |+| 12 | SS | input | Soft-start control pin; external capacitor with internal 50-µA current source sets soft-start ramp; current reduced to 1 µA following restart; soft-stop discharge current is 50 µA. |+| 13 | COMP | input | Pulse width modulator input accepting control current from external optocoupler error amplifier; zero input current produces maximum duty cycle while 1 mA reduces duty cycle to zero. |+| 14 | RT | input | Oscillator frequency control normally biased at 2 V; total external resistance connected between RT and AGND sets the internal oscillator frequency. |+| 15 | SYNC | bidirectional | Oscillator synchronization input/output; internal oscillator can synchronize to external clock via pulldown device; multiple LM5026 devices can be synchronized by connecting SYNC pins together. |+| 16 | DCL | input | Maximum duty cycle control; external resistor divider from RT to AGND sets the maximum output duty cycle for OUT_A. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | Power Management (PMIC) |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `LM5026MTX`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `lm5026mtx-etched.step` / `lm5026mtx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm5026mtx.step` / `lm5026mtx.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm5026) (40 pp, sha256 `521b7e5713589751`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm5026mtx-datasheet.pdf)
page.jsonadded+189
@@ -0,0 +1,189 @@+{+  "slug": "lm5026mtx",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments AC-DC Controllers And Regulators, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "lm5026mtx",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm5026mtx.kicad_sym",+    "lm5026mtx.kicad_mod",+    "lm5026mtx.glb",+    "lm5026mtx.step",+    "lm5026mtx.lbr",+    "docs/hero.png",+    "docs/lm5026mtx-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LM5026MTX",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-16",+    "pin_count": 16,+    "category": "Power Management (PMIC)",+    "subcategory": "AC-DC Controllers And Regulators",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lm5026",+    "parts": {+      "symbol": "lm5026mtx.kicad_sym",+      "footprint": "lm5026mtx.kicad_mod",+      "model_3d": "lm5026mtx-etched.glb",+      "model_3d_plain": "lm5026mtx.glb",+      "model_3d_step": "lm5026mtx-etched.step",+      "model_3d_step_plain": "lm5026mtx.step",+      "lbr": "lm5026mtx.lbr"+    },+    "distributor_links": {+      "lcsc": "C118021"+    },+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "power_in",+        "description": "Input voltage source to the start-up regulator with operating input range of 13 V to 100 V and transient capability to 105 V."+      },+      {+        "number": "2",+        "name": "UVLO",+        "type": "input",+        "description": "Line undervoltage lockout controlled by external voltage divider; enables VCC and REF regulators at 0.4-V threshold and enables SS pin and active mode at 1.25-V threshold."+      },+      {+        "number": "3",+        "name": "CS",+        "type": "input",+        "description": "Current sense input for current mode control; exceeding 0.5 V terminates output pulse for cycle-by-cycle current limit; internal switch holds CS low for 100 ns after OUT_A switches high."+      },+      {+        "number": "4",+        "name": "RES",+        "type": "input",+        "description": "Restart timer input with external capacitor; 10-µA current source charges capacitor during cycle-by-cycle current limit; 2.5-V threshold triggers soft-start reset and discharge at 1 µA reverting to 50 µA after first pulse."+      },+      {+        "number": "5",+        "name": "TIME",+        "type": "input",+        "description": "Gate drive overlap or deadtime control; external RSET resistor to AGND produces in-phase OUT_A and OUT_B pulses with overlap; connection to REF produces out-of-phase pulses with deadtime."+      },+      {+        "number": "6",+        "name": "REF",+        "type": "output",+        "description": "5-V precision reference output with maximum output current of 10 mA; requires local 0.1-µF decoupling capacitor."+      },+      {+        "number": "7",+        "name": "VCC",+        "type": "power_in",+        "description": "High voltage start-up regulator output regulated to 7.6 V; supplies power to internal circuitry; auxiliary winding above regulation setpoint disables internal start-up regulator."+      },+      {+        "number": "8",+        "name": "OUT_A",+        "type": "output",+        "description": "Main switch PWM gate driver output with 3-A peak sink current capability and compound MOS-Bipolar configuration for superior gate drive characteristics."+      },+      {+        "number": "9",+        "name": "OUT_B",+        "type": "output",+        "description": "Active clamp switch gate driver output with 0.5-A peak source and sink current capability; can drive P-Channel or N-Channel clamp switches."+      },+      {+        "number": "10",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground connection; must connect directly to analog ground with short direct connection to AGND to avoid jitter."+      },+      {+        "number": "11",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog return ground connection; must connect directly to power ground with short direct connection to PGND to avoid jitter."+      },+      {+        "number": "12",+        "name": "SS",+        "type": "input",+        "description": "Soft-start control pin; external capacitor with internal 50-µA current source sets soft-start ramp; current reduced to 1 µA following restart; soft-stop discharge current is 50 µA."+      },+      {+        "number": "13",+        "name": "COMP",+        "type": "input",+        "description": "Pulse width modulator input accepting control current from external optocoupler error amplifier; zero input current produces maximum duty cycle while 1 mA reduces duty cycle to zero."+      },+      {+        "number": "14",+        "name": "RT",+        "type": "input",+        "description": "Oscillator frequency control normally biased at 2 V; total external resistance connected between RT and AGND sets the internal oscillator frequency."+      },+      {+        "number": "15",+        "name": "SYNC",+        "type": "bidirectional",+        "description": "Oscillator synchronization input/output; internal oscillator can synchronize to external clock via pulldown device; multiple LM5026 devices can be synchronized by connecting SYNC pins together."+      },+      {+        "number": "16",+        "name": "DCL",+        "type": "input",+        "description": "Maximum duty cycle control; external resistor divider from RT to AGND sets the maximum output duty cycle for OUT_A."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 40,+        "cost_usd": 0.3743,+        "at": "2026-09-24T10:35:20"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lm5026",+        "pages": 40,+        "sha256": "521b7e5713589751",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file