component
LM5010MHX
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/lm5010mhx
7feae9f
LM5010MHX
Texas Instruments · DC-DC Converters · HTSSOP-14-EP
LM5010MHX from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection. |
| 2 | SW | output | Switching node internally connected to buck switch source; connect to inductor, free-wheeling diode, and bootstrap capacitor. |
| 3 | BST | input | Boost pin for bootstrap capacitor; connect 0.022-µF capacitor from SW to this pin, charged from VCC through internal diode during OFF-time. |
| 4 | ISEN | input | Current sense input; recirculating current flows through internal sense resistor and out this pin to free-wheeling diode; current limit nominally 1.25 A. |
| 5 | SGND | power_in | Sense ground; recirculating current flows into this pin to current sense resistor. |
| 6 | RTN | power_in | Circuit ground for all internal circuitry other than current limit detection. |
| 7 | NC | unconnected | No connection. |
| 8 | NC | unconnected | No connection. |
| 9 | FB | input | Feedback input from regulated output; internally connected to regulation and overvoltage comparators; regulation level 2.5 V. |
| 10 | SS | input | Soft start input; internal 11.5-µA current source charges external capacitor to 2.5 V for soft start function. |
| 11 | RON/SD | input | ON-time control and shutdown input; external resistor from VIN to this pin sets buck switch ON-time; grounding this pin shuts down regulator. |
| 12 | VCC | power_in | Output from startup regulator nominally 7 V; external voltage 7.5 V to 14 V can be applied to reduce internal dissipation; internal diode to VIN. |
| 13 | VIN | power_in | Input supply with nominal range 8 V to 75 V. |
| 14 | NC | unconnected | No connection. |
| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-14-EP |
| Category | Power Management (PMIC) |
| Pins | 15 |
CAD (KiCad official)
- Symbol:
LM5010MHX - Footprint:
Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm - 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
- 3D model files:
lm5010mhx-etched.step/lm5010mhx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5010mhx.step/lm5010mhx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
78d80822c7c15f07, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM5010MHX
**Texas Instruments** · DC-DC Converters · HTSSOP-14-EP
LM5010MHX from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection. |
| 2 | SW | output | Switching node internally connected to buck switch source; connect to inductor, free-wheeling diode, and bootstrap capacitor. |
| 3 | BST | input | Boost pin for bootstrap capacitor; connect 0.022-µF capacitor from SW to this pin, charged from VCC through internal diode during OFF-time. |
| 4 | ISEN | input | Current sense input; recirculating current flows through internal sense resistor and out this pin to free-wheeling diode; current limit nominally 1.25 A. |
| 5 | SGND | power_in | Sense ground; recirculating current flows into this pin to current sense resistor. |
| 6 | RTN | power_in | Circuit ground for all internal circuitry other than current limit detection. |
| 7 | NC | unconnected | No connection. |
| 8 | NC | unconnected | No connection. |
| 9 | FB | input | Feedback input from regulated output; internally connected to regulation and overvoltage comparators; regulation level 2.5 V. |
| 10 | SS | input | Soft start input; internal 11.5-µA current source charges external capacitor to 2.5 V for soft start function. |
| 11 | RON/SD | input | ON-time control and shutdown input; external resistor from VIN to this pin sets buck switch ON-time; grounding this pin shuts down regulator. |
| 12 | VCC | power_in | Output from startup regulator nominally 7 V; external voltage 7.5 V to 14 V can be applied to reduce internal dissipation; internal diode to VIN. |
| 13 | VIN | power_in | Input supply with nominal range 8 V to 75 V. |
| 14 | NC | unconnected | No connection. |
| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-14-EP |
| Category | Power Management (PMIC) |
| Pins | 15 |
## CAD (KiCad official)
- Symbol: `LM5010MHX`
- Footprint: `Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm`
- 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
- 3D model files: `lm5010mhx-etched.step` / `lm5010mhx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm5010mhx.step` / `lm5010mhx.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm5010) (35 pp, sha256 `78d80822c7c15f07`, retrieved 2026-09-22, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm5010mhx-datasheet.pdf)