component
LM5010MHX
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+51@@ -0,0 +1,51 @@+# LM5010MHX++**Texas Instruments** · DC-DC Converters · HTSSOP-14-EP++LM5010MHX from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NC | unconnected | No connection. |+| 2 | SW | output | Switching node internally connected to buck switch source; connect to inductor, free-wheeling diode, and bootstrap capacitor. |+| 3 | BST | input | Boost pin for bootstrap capacitor; connect 0.022-µF capacitor from SW to this pin, charged from VCC through internal diode during OFF-time. |+| 4 | ISEN | input | Current sense input; recirculating current flows through internal sense resistor and out this pin to free-wheeling diode; current limit nominally 1.25 A. |+| 5 | SGND | power_in | Sense ground; recirculating current flows into this pin to current sense resistor. |+| 6 | RTN | power_in | Circuit ground for all internal circuitry other than current limit detection. |+| 7 | NC | unconnected | No connection. |+| 8 | NC | unconnected | No connection. |+| 9 | FB | input | Feedback input from regulated output; internally connected to regulation and overvoltage comparators; regulation level 2.5 V. |+| 10 | SS | input | Soft start input; internal 11.5-µA current source charges external capacitor to 2.5 V for soft start function. |+| 11 | RON/SD | input | ON-time control and shutdown input; external resistor from VIN to this pin sets buck switch ON-time; grounding this pin shuts down regulator. |+| 12 | VCC | power_in | Output from startup regulator nominally 7 V; external voltage 7.5 V to 14 V can be applied to reduce internal dissipation; internal diode to VIN. |+| 13 | VIN | power_in | Input supply with nominal range 8 V to 75 V. |+| 14 | NC | unconnected | No connection. |+| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-14-EP |+| Category | Power Management (PMIC) |+| Pins | 15 |++## CAD (KiCad official)++- Symbol: `LM5010MHX`+- Footprint: `Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)+- 3D model files: `lm5010mhx-etched.step` / `lm5010mhx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm5010mhx.step` / `lm5010mhx.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm5010) (35 pp, sha256 `78d80822c7c15f07`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm5010mhx-datasheet.pdf)
page.jsonadded+186@@ -0,0 +1,186 @@+{+ "slug": "lm5010mhx",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, HTSSOP-14-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "lm5010mhx",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm5010mhx.kicad_sym",+ "lm5010mhx.kicad_mod",+ "lm5010mhx.glb",+ "lm5010mhx.step",+ "lm5010mhx.lbr",+ "docs/hero.png",+ "docs/lm5010mhx-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "LM5010MHX",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-14-EP",+ "pin_count": 15,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lm5010",+ "parts": {+ "symbol": "lm5010mhx.kicad_sym",+ "footprint": "lm5010mhx.kicad_mod",+ "model_3d": "lm5010mhx-etched.glb",+ "model_3d_plain": "lm5010mhx.glb",+ "model_3d_step": "lm5010mhx-etched.step",+ "model_3d_step_plain": "lm5010mhx.step",+ "lbr": "lm5010mhx.lbr"+ },+ "distributor_links": {+ "lcsc": "C388177"+ },+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection."+ },+ {+ "number": "2",+ "name": "SW",+ "type": "output",+ "description": "Switching node internally connected to buck switch source; connect to inductor, free-wheeling diode, and bootstrap capacitor."+ },+ {+ "number": "3",+ "name": "BST",+ "type": "input",+ "description": "Boost pin for bootstrap capacitor; connect 0.022-µF capacitor from SW to this pin, charged from VCC through internal diode during OFF-time."+ },+ {+ "number": "4",+ "name": "ISEN",+ "type": "input",+ "description": "Current sense input; recirculating current flows through internal sense resistor and out this pin to free-wheeling diode; current limit nominally 1.25 A."+ },+ {+ "number": "5",+ "name": "SGND",+ "type": "power_in",+ "description": "Sense ground; recirculating current flows into this pin to current sense resistor."+ },+ {+ "number": "6",+ "name": "RTN",+ "type": "power_in",+ "description": "Circuit ground for all internal circuitry other than current limit detection."+ },+ {+ "number": "7",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection."+ },+ {+ "number": "8",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection."+ },+ {+ "number": "9",+ "name": "FB",+ "type": "input",+ "description": "Feedback input from regulated output; internally connected to regulation and overvoltage comparators; regulation level 2.5 V."+ },+ {+ "number": "10",+ "name": "SS",+ "type": "input",+ "description": "Soft start input; internal 11.5-µA current source charges external capacitor to 2.5 V for soft start function."+ },+ {+ "number": "11",+ "name": "RON/SD",+ "type": "input",+ "description": "ON-time control and shutdown input; external resistor from VIN to this pin sets buck switch ON-time; grounding this pin shuts down regulator."+ },+ {+ "number": "12",+ "name": "VCC",+ "type": "power_in",+ "description": "Output from startup regulator nominally 7 V; external voltage 7.5 V to 14 V can be applied to reduce internal dissipation; internal diode to VIN."+ },+ {+ "number": "13",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply with nominal range 8 V to 75 V."+ },+ {+ "number": "14",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection."+ },+ {+ "number": "15",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 15 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 35,+ "cost_usd": 0.3549,+ "at": "2026-09-22T21:23:44"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lm5010",+ "pages": 35,+ "sha256": "78d80822c7c15f07",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 15,+ "described": 15,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}