component
LM5002MAX
Public Made by Adomby adom
Texas Instruments DC-DC Converters, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/lm5002max
2a0086d
LM5002MAX
Texas Instruments · DC-DC Converters · SOIC-8
LM5002MAX from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | tri_state | Switch output at drain of internal 75-V MOSFET with tri-state control, switching to high-Z when 0.5-A cycle-by-cycle current limit is triggered. |
| 2 | VIN | power_in | Input supply pin accepting 3.1 V to 75 V from external DC source; input transient filtering is recommended. |
| 3 | VCC | power_in | Regulated 6.9-V bias output tracking VIN or external 7-12-V input to reduce dissipation; minimum 0.47-µF ceramic capacitor required. |
| 4 | GND | power_in | Ground connection providing internal reference for regulator control functions and MOSFET current sensing. |
| 5 | RT | input | Frequency programming input with external resistor to GND setting oscillator range from 50 KHz to 1.5 MHz, accepting 100-pF AC-coupled external synchronization pulses. |
| 6 | FB | input | Feedback input to inverting terminal of error amplifier with 1.26-V internal reference on non-inverting terminal for output regulation. |
| 7 | COMP | output | Error amplifier open-drain output with 5-kΩ pullup resistor, requiring external loop compensation network between COMP and FB pins. |
| 8 | EN | input | Enable/UVLO input with dual-threshold logic: below 0.45 V triggers shutdown (95-µA quiescent), above 1.26 V enables normal operation, with internal 6-µA pullup when unconnected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LM5002MAX - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
lm5002max-etched.step/lm5002max-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5002max.step/lm5002max.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
a2e8ebdf06407ec2, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM5002MAX
**Texas Instruments** · DC-DC Converters · SOIC-8
LM5002MAX from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | tri_state | Switch output at drain of internal 75-V MOSFET with tri-state control, switching to high-Z when 0.5-A cycle-by-cycle current limit is triggered. |
| 2 | VIN | power_in | Input supply pin accepting 3.1 V to 75 V from external DC source; input transient filtering is recommended. |
| 3 | VCC | power_in | Regulated 6.9-V bias output tracking VIN or external 7-12-V input to reduce dissipation; minimum 0.47-µF ceramic capacitor required. |
| 4 | GND | power_in | Ground connection providing internal reference for regulator control functions and MOSFET current sensing. |
| 5 | RT | input | Frequency programming input with external resistor to GND setting oscillator range from 50 KHz to 1.5 MHz, accepting 100-pF AC-coupled external synchronization pulses. |
| 6 | FB | input | Feedback input to inverting terminal of error amplifier with 1.26-V internal reference on non-inverting terminal for output regulation. |
| 7 | COMP | output | Error amplifier open-drain output with 5-kΩ pullup resistor, requiring external loop compensation network between COMP and FB pins. |
| 8 | EN | input | Enable/UVLO input with dual-threshold logic: below 0.45 V triggers shutdown (95-µA quiescent), above 1.26 V enables normal operation, with internal 6-µA pullup when unconnected. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `LM5002MAX`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `lm5002max-etched.step` / `lm5002max-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm5002max.step` / `lm5002max.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm5002) (40 pp, sha256 `a2e8ebdf06407ec2`, retrieved 2026-09-23, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm5002max-datasheet.pdf)