main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm5002max: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm5002max: viewers · Ray
lm5002max-etched.fit.json lm5002max: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm5002max-etched.glb lm5002max: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm5002max-etched.step lm5002max: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm5002max.glb Publish 0.1.0 · Ray
lm5002max.kicad_mod Publish 0.1.0 · Ray
lm5002max.kicad_sym Publish 0.1.0 · Ray
lm5002max.lbr Publish 0.1.0 · Ray
lm5002max.step Publish 0.1.0 · Ray
package.json lm5002max: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json lm5002max: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/lm5002max · Ray

LM5002MAX

Texas Instruments · DC-DC Converters · SOIC-8

LM5002MAX from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW tri_state Switch output at drain of internal 75-V MOSFET with tri-state control, switching to high-Z when 0.5-A cycle-by-cycle current limit is triggered.
2 VIN power_in Input supply pin accepting 3.1 V to 75 V from external DC source; input transient filtering is recommended.
3 VCC power_in Regulated 6.9-V bias output tracking VIN or external 7-12-V input to reduce dissipation; minimum 0.47-µF ceramic capacitor required.
4 GND power_in Ground connection providing internal reference for regulator control functions and MOSFET current sensing.
5 RT input Frequency programming input with external resistor to GND setting oscillator range from 50 KHz to 1.5 MHz, accepting 100-pF AC-coupled external synchronization pulses.
6 FB input Feedback input to inverting terminal of error amplifier with 1.26-V internal reference on non-inverting terminal for output regulation.
7 COMP output Error amplifier open-drain output with 5-kΩ pullup resistor, requiring external loop compensation network between COMP and FB pins.
8 EN input Enable/UVLO input with dual-threshold logic: below 0.45 V triggers shutdown (95-µA quiescent), above 1.26 V enables normal operation, with internal 6-µA pullup when unconnected.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: LM5002MAX
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lm5002max-etched.step / lm5002max-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm5002max.step / lm5002max.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 a2e8ebdf06407ec2, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF