main
Ray
Publish 0.1.0
b83a42f
LM4808MMX
Texas Instruments · Audio Power OpAmps · VSSOP-8
LM4808MMX from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Amplifier A output, typically AC-coupled to the load through an output capacitor Co, driving 16Ω or 32Ω loads. |
| 2 | IN A (-) | input | Amplifier A inverting input, connected through Ri and Ci from the audio source, with Rf to the output setting closed-loop gain. |
| 3 | IN A (+) | input | Amplifier A non-inverting input, biased to 1/2 VDD by the RB divider with bypass capacitor CB (typically 1.0µF). |
| 4 | GND | power_in | Ground pin; all voltages are measured with respect to it. |
| 5 | IN B (+) | input | Amplifier B non-inverting input, biased to 1/2 VDD together with IN A (+) via the RB divider and CB. |
| 6 | IN B (-) | input | Amplifier B inverting input, connected through Ri and Ci from the audio source, with Rf to the output setting closed-loop gain. |
| 7 | OUT B | output | Amplifier B output, typically AC-coupled to the load through an output capacitor Co, driving 16Ω or 32Ω loads. |
| 8 | VDD | power_in | Positive supply, operating range 2.0V to 5.5V (absolute maximum 6.0V), bypassed with a 0.1µF capacitor Cs to ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Supply Voltage | VDD | 2 | 5.5 | V | 3 | ||
| IDD Supply Current | IDD | 1.2 | 3 | mA | VIN = 0V, IO = 0A | 3 | |
| Total Power Dissipation | Ptot | 6 | 16.5 | mW | VIN = 0V, IO = 0A | 4 | |
| Input Offset Voltage | VOS | 10 | 50 | mV | VIN = 0V | 4 | |
| Output Swing | VO | 0.3 | 4.7 | V | RL = 32Ω, 0.1% THD+N | 4 | |
| Output Power | Po | 60 | 70 | mW | THD+N = 0.1%, f = 1 kHz, RL = 32Ω | 4 | |
| Supply Current (VDD = 3.3V) | IDD | 1 | mA | VDD = 3.3V; VIN = 0V, IO = 0A | 4 | ||
| Input Offset Voltage (VDD = 3.3V) | VOS | 7 | mV | VDD = 3.3V; VIN = 0V | 4 | ||
| Supply Current (VDD = 2.6V) | IDD | 0.9 | mA | VDD = 2.6V; VIN = 0V, IO = 0A | 5 | ||
| Input Offset Voltage (VDD = 2.6V) | VOS | 5 | mV | VDD = 2.6V; VIN = 0V | 5 | ||
| Operating Temperature Range | TA | -40 | 85 | °C | TMIN ≤ TA ≤ TMAX | 3 | |
| Operating Supply Voltage | VDD | 2 | 5.5 | V | 3 | ||
| Supply Voltage (absolute maximum) | VDD | 6 | V | 3 | |||
| Input Voltage | VIN | -0.3 | V | Upper limit printed as VDD + 0.3V | 3 | ||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Junction Temperature | TJ | 150 | °C | 3 | |||
| ESD Susceptibility (Human Body Model) | 3500 | V | Human body model, 100 pF discharged through 1.5 kΩ resistor | 3 | |||
| ESD Susceptibility (Machine Model) | 250 | V | Machine model, 220 pF-240 pF discharged through all pins | 3 | |||
| Vapor Phase Soldering | 215 | °C | Vapor phase, 60 seconds | 3 | |||
| Infrared Soldering | 220 | °C | Infrared, 15 seconds | 3 | |||
| Thermal Resistance Junction-to-Case (VSSOP) | θJC | 56 | °C/W | VSSOP package | 3 | ||
| Thermal Resistance Junction-to-Ambient (VSSOP) | θJA | 210 | °C/W | VSSOP (DGK0008A), board mounted | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LM4808MMX - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm4808mmx-etched.step/lm4808mmx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm4808mmx.step/lm4808mmx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
e622bbed694002d4, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# LM4808MMX
**Texas Instruments** · Audio Power OpAmps · VSSOP-8
LM4808MMX from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Amplifier A output, typically AC-coupled to the load through an output capacitor Co, driving 16Ω or 32Ω loads. |
| 2 | IN A (-) | input | Amplifier A inverting input, connected through Ri and Ci from the audio source, with Rf to the output setting closed-loop gain. |
| 3 | IN A (+) | input | Amplifier A non-inverting input, biased to 1/2 VDD by the RB divider with bypass capacitor CB (typically 1.0µF). |
| 4 | GND | power_in | Ground pin; all voltages are measured with respect to it. |
| 5 | IN B (+) | input | Amplifier B non-inverting input, biased to 1/2 VDD together with IN A (+) via the RB divider and CB. |
| 6 | IN B (-) | input | Amplifier B inverting input, connected through Ri and Ci from the audio source, with Rf to the output setting closed-loop gain. |
| 7 | OUT B | output | Amplifier B output, typically AC-coupled to the load through an output capacitor Co, driving 16Ω or 32Ω loads. |
| 8 | VDD | power_in | Positive supply, operating range 2.0V to 5.5V (absolute maximum 6.0V), bypassed with a 0.1µF capacitor Cs to ground. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Supply Voltage | VDD | 2 | | 5.5 | V | | 3 |
| IDD Supply Current | IDD | | 1.2 | 3 | mA | VIN = 0V, IO = 0A | 3 |
| Total Power Dissipation | Ptot | | 6 | 16.5 | mW | VIN = 0V, IO = 0A | 4 |
| Input Offset Voltage | VOS | | 10 | 50 | mV | VIN = 0V | 4 |
| Output Swing | VO | 0.3 | | 4.7 | V | RL = 32Ω, 0.1% THD+N | 4 |
| Output Power | Po | 60 | 70 | | mW | THD+N = 0.1%, f = 1 kHz, RL = 32Ω | 4 |
| Supply Current (VDD = 3.3V) | IDD | | | 1 | mA | VDD = 3.3V; VIN = 0V, IO = 0A | 4 |
| Input Offset Voltage (VDD = 3.3V) | VOS | | | 7 | mV | VDD = 3.3V; VIN = 0V | 4 |
| Supply Current (VDD = 2.6V) | IDD | | | 0.9 | mA | VDD = 2.6V; VIN = 0V, IO = 0A | 5 |
| Input Offset Voltage (VDD = 2.6V) | VOS | | | 5 | mV | VDD = 2.6V; VIN = 0V | 5 |
| Operating Temperature Range | TA | -40 | | 85 | °C | TMIN ≤ TA ≤ TMAX | 3 |
| Operating Supply Voltage | VDD | 2 | | 5.5 | V | | 3 |
| Supply Voltage (absolute maximum) | VDD | | | 6 | V | | 3 |
| Input Voltage | VIN | -0.3 | | | V | Upper limit printed as VDD + 0.3V | 3 |
| Storage Temperature | | -65 | | 150 | °C | | 3 |
| Junction Temperature | TJ | | | 150 | °C | | 3 |
| ESD Susceptibility (Human Body Model) | | | | 3500 | V | Human body model, 100 pF discharged through 1.5 kΩ resistor | 3 |
| ESD Susceptibility (Machine Model) | | | | 250 | V | Machine model, 220 pF-240 pF discharged through all pins | 3 |
| Vapor Phase Soldering | | | | 215 | °C | Vapor phase, 60 seconds | 3 |
| Infrared Soldering | | | | 220 | °C | Infrared, 15 seconds | 3 |
| Thermal Resistance Junction-to-Case (VSSOP) | θJC | | 56 | | °C/W | VSSOP package | 3 |
| Thermal Resistance Junction-to-Ambient (VSSOP) | θJA | | 210 | | °C/W | VSSOP (DGK0008A), board mounted | 3 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `LM4808MMX`
- Footprint: `Package_SO:VSSOP-8_3x3mm_P0.65mm`
- 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `lm4808mmx-etched.step` / `lm4808mmx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm4808mmx.step` / `lm4808mmx.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm4808.pdf) (29 pp, sha256 `e622bbed694002d4`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/lm4808mmx-datasheet.pdf)