Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM4808MMX

Texas Instruments · Audio Power OpAmps · VSSOP-8

LM4808MMX from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 OUT A output Amplifier A output, typically AC-coupled to the load through an output capacitor Co, driving 16Ω or 32Ω loads.
2 IN A (-) input Amplifier A inverting input, connected through Ri and Ci from the audio source, with Rf to the output setting closed-loop gain.
3 IN A (+) input Amplifier A non-inverting input, biased to 1/2 VDD by the RB divider with bypass capacitor CB (typically 1.0µF).
4 GND power_in Ground pin; all voltages are measured with respect to it.
5 IN B (+) input Amplifier B non-inverting input, biased to 1/2 VDD together with IN A (+) via the RB divider and CB.
6 IN B (-) input Amplifier B inverting input, connected through Ri and Ci from the audio source, with Rf to the output setting closed-loop gain.
7 OUT B output Amplifier B output, typically AC-coupled to the load through an output capacitor Co, driving 16Ω or 32Ω loads.
8 VDD power_in Positive supply, operating range 2.0V to 5.5V (absolute maximum 6.0V), bypassed with a 0.1µF capacitor Cs to ground.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Operational Amplifier/Comparator
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD Supply Voltage VDD 2 5.5 V 3
IDD Supply Current IDD 1.2 3 mA VIN = 0V, IO = 0A 3
Total Power Dissipation Ptot 6 16.5 mW VIN = 0V, IO = 0A 4
Input Offset Voltage VOS 10 50 mV VIN = 0V 4
Output Swing VO 0.3 4.7 V RL = 32Ω, 0.1% THD+N 4
Output Power Po 60 70 mW THD+N = 0.1%, f = 1 kHz, RL = 32Ω 4
Supply Current (VDD = 3.3V) IDD 1 mA VDD = 3.3V; VIN = 0V, IO = 0A 4
Input Offset Voltage (VDD = 3.3V) VOS 7 mV VDD = 3.3V; VIN = 0V 4
Supply Current (VDD = 2.6V) IDD 0.9 mA VDD = 2.6V; VIN = 0V, IO = 0A 5
Input Offset Voltage (VDD = 2.6V) VOS 5 mV VDD = 2.6V; VIN = 0V 5
Operating Temperature Range TA -40 85 °C TMIN ≤ TA ≤ TMAX 3
Operating Supply Voltage VDD 2 5.5 V 3
Supply Voltage (absolute maximum) VDD 6 V 3
Input Voltage VIN -0.3 V Upper limit printed as VDD + 0.3V 3
Storage Temperature -65 150 °C 3
Junction Temperature TJ 150 °C 3
ESD Susceptibility (Human Body Model) 3500 V Human body model, 100 pF discharged through 1.5 kΩ resistor 3
ESD Susceptibility (Machine Model) 250 V Machine model, 220 pF-240 pF discharged through all pins 3
Vapor Phase Soldering 215 °C Vapor phase, 60 seconds 3
Infrared Soldering 220 °C Infrared, 15 seconds 3
Thermal Resistance Junction-to-Case (VSSOP) θJC 56 °C/W VSSOP package 3
Thermal Resistance Junction-to-Ambient (VSSOP) θJA 210 °C/W VSSOP (DGK0008A), board mounted 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LM4808MMX
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm4808mmx-etched.step / lm4808mmx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm4808mmx.step / lm4808mmx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 e622bbed694002d4, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF