LM43600PWPT

{
  "schema_version": 1,
  "type": "component",
  "slug": "lm43600pwpt",
  "title": "LM43600PWPT",
  "brief": "Texas Instruments DC-DC Converters, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power supply chip",
    "lm43600pwpt",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "LM43600PWPT",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-16-EP",
    "pin_count": 17,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm43600",
    "parts": {
      "symbol": "lm43600pwpt.kicad_sym",
      "footprint": "lm43600pwpt.kicad_mod",
      "model_3d": "lm43600pwpt-hero.glb",
      "model_3d_plain": "lm43600pwpt.glb",
      "model_3d_step": "lm43600pwpt-etched.step",
      "model_3d_step_plain": "lm43600pwpt.step",
      "lbr": "lm43600pwpt.lbr"
    },
    "distributor_links": {
      "lcsc": "C2071199",
      "digikey": "296-38370-2-ND",
      "mouser": "595-LM43600PWPT"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T20:01:58Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-38370-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-LM43600PWPT",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SW",
        "type": "power_out",
        "description": "Switching output of the regulator, internally connected to both power MOSFETs; connect to the power inductor."
      },
      {
        "number": "2",
        "name": "SW",
        "type": "power_out",
        "description": "Switching output of the regulator, internally connected to both power MOSFETs; connect to the power inductor."
      },
      {
        "number": "3",
        "name": "CBOOT",
        "type": "passive",
        "description": "Bootstrap capacitor connection for the high-side driver; connect a high-quality 470-nF capacitor from CBOOT to SW."
      },
      {
        "number": "4",
        "name": "VCC",
        "type": "power_out",
        "description": "Internal bias supply output for bypassing; connect the bypass capacitor to AGND, do not connect an external load, and never short this pin to ground during operation."
      },
      {
        "number": "5",
        "name": "BIAS",
        "type": "power_in",
        "description": "Optional internal LDO supply input; TI recommends tying to VOUT when 3.3 V ≤ VOUT ≤ 28 V or to an external 3.3-V or 5-V rail, with a 1 to 10 µF bypass capacitor to ground, and tie to ground when not in use."
      },
      {
        "number": "6",
        "name": "SYNC",
        "type": "input",
        "description": "Clock input to synchronize switching to an external clock; use proper high-speed termination, connect to ground if not used, and do not float."
      },
      {
        "number": "7",
        "name": "RT",
        "type": "passive",
        "description": "Connect a resistor RT from this pin to AGND to program the switching frequency; leave floating for the 50-kHz default switching frequency."
      },
      {
        "number": "8",
        "name": "PGOOD",
        "type": "output",
        "description": "Open-drain power-good flag output; use a 10 kΩ to 100 kΩ pullup resistor to a logic rail or other DC voltage no higher than 12 V."
      },
      {
        "number": "9",
        "name": "FB",
        "type": "input",
        "description": "Feedback sense input, connected to the midpoint of the feedback divider to set VOUT; do not short this pin to ground during operation."
      },
      {
        "number": "10",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground pin, the ground reference for internal references and logic; connect to system ground."
      },
      {
        "number": "11",
        "name": "SS/TRK",
        "type": "input",
        "description": "Soft-start control pin; leave floating for internal soft-start slew rate, connect a capacitor to extend soft-start time, or connect an external voltage ramp for tracking."
      },
      {
        "number": "12",
        "name": "EN",
        "type": "input",
        "description": "Enable input: high = ON and low = OFF; connect to VIN, through a resistor divider, or to an external voltage or logic source, and do not float."
      },
      {
        "number": "13",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply input to the internal LDO and high-side power FET; connect to the power supply and bypass capacitor CIN, keeping the path from VIN to CIN and PGND as short as possible."
      },
      {
        "number": "14",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply input to the internal LDO and high-side power FET; connect to the power supply and bypass capacitor CIN, keeping the path from VIN to CIN and PGND as short as possible."
      },
      {
        "number": "15",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground pin, connected internally to the low-side power FET; connect to system ground, PAD, AGND, and the ground pins of CIN and COUT, keeping the path to CIN as short as possible."
      },
      {
        "number": "16",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground pin, connected internally to the low-side power FET; connect to system ground, PAD, AGND, and the ground pins of CIN and COUT, keeping the path to CIN as short as possible."
      },
      {
        "number": "17",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exposed thermal pad is printed as 'PAD' with no pin number in the datasheet pin table, so it is ; Pin types were mapped from the datasheet's P/A/G column to KiCad ERC classes. SW and VCC are mapped ; The pinout is for the PWP 16-pin HTSSOP package. The ordering addendum (page 47) confirms LM43600PWP",
          "exposed pad 17 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0667,
        "at": "2026-10-08T20:01:15"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm43600",
        "pages": 53,
        "sha256": "b0c7584744fe3343",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm43600pwpt.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7982746831c0bd23f4690608869ad67776faae5c762fb0376666126a3998921b",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm43600pwpt-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07b80775ce272101b4d2d2a6148476e8bf3be526128cc9f79ffb1dab37526eb9",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "HTSSOP-16-EP",
      "Category": "Power Supply Chip",
      "Pins": "17"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lm43600pwpt"
  ],
  "discovery_pitch": "LM43600PWPT (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm43600pwpt.kicad_sym",
    "lm43600pwpt.kicad_mod",
    "lm43600pwpt.glb",
    "lm43600pwpt.step",
    "lm43600pwpt.lbr",
    "docs/hero.png",
    "docs/lm43600pwpt-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm43600pwpt-hero.glb",
    "lm43600pwpt-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}