main
Ray
Publish 0.1.0
5da7a80
LM43600AQPWPRQ1
Texas Instruments · DC-DC Converters · HTSSOP-16-EP
LM43600AQPWPRQ1 from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | passive | Switching output of the regulator, internally connected to both power MOSFETs; connect to the power inductor. |
| 2 | SW | passive | Switching output of the regulator, internally connected to both power MOSFETs; connect to the power inductor. |
| 3 | CBOOT | passive | Bootstrap capacitor connection for the high-side driver; connect a high-quality 470-nF capacitor from CBOOT to SW. |
| 4 | VCC | power_in | Internal bias supply output for bypassing; connect a bypass capacitor to AGND, do not connect an external load, and never short to ground during operation. |
| 5 | BIAS | power_in | Optional internal LDO supply input; tie to VOUT when 3.3 V ≤ VOUT ≤ 28 V or to an external 3.3 V or 5 V rail, with a 1 to 10 µF bypass capacitor, and tie to ground when not in use (do not float). |
| 6 | SYNC | input | Clock input to synchronize switching to an external clock; connect to ground if not used and do not float. |
| 7 | RT | passive | Connect a resistor RT to AGND to program the switching frequency; leave floating for the 500 kHz default. |
| 8 | PGOOD | output | Open-drain power-good flag output; use a 10-kΩ to 100-kΩ pullup to a logic rail or DC voltage no higher than 12 V. |
| 9 | FB | input | Feedback sense input connected to the midpoint of the feedback divider to set VOUT; do not short to ground during operation. |
| 10 | AGND | power_in | Analog ground, reference for internal references and logic; connect to system ground. |
| 11 | SS/TRK | input | Soft-start control pin; leave floating for internal soft-start, connect a capacitor to extend soft-start time or an external voltage ramp for tracking. |
| 12 | EN | input | Enable input (high = ON, low = OFF); connect to VIN, to VIN through a resistor divider, or to an external voltage or logic source, and do not float. |
| 13 | VIN | power_in | Supply input to the internal LDO and high-side power FET (3.5 V to 36 V recommended); connect to the supply and CIN bypass capacitors with a very short path. |
| 14 | VIN | power_in | Supply input to the internal LDO and high-side power FET (3.5 V to 36 V recommended); connect to the supply and CIN bypass capacitors with a very short path. |
| 15 | PGND | power_in | Power ground connected internally to the low-side power FET; connect to system ground, PAD, AGND, and CIN and COUT grounds. |
| 16 | PGND | power_in | Power ground connected internally to the low-side power FET; connect to system ground, PAD, AGND, and CIN and COUT grounds. |
| 17 | PAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-16-EP |
| Category | Power Supply Chip |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Shutdown quiescent current | ISHDN | 1.1 | 3.1 | µA | VEN = 0 V | 5 | |
| Operating quiescent current (non-switching) from VIN | IQ-NONSW | 6 | 11 | µA | VEN = 3.3 V, VFB = 1.5 V, VBIAS = 3.4 V external | 5 | |
| Operating quiescent current (non-switching) from external VBIAS | IBIAS-NONSW | 85 | 140 | µA | VEN = 3.3 V, VFB = 1.5 V, VBIAS = 3.4 V external | 5 | |
| Minimum input voltage for start-up | VIN-MIN-ST | 3.8 | V | 5 | |||
| Precision enable level for switching and regulator output | VEN-VOUT-H | 2 | 2.1 | 2.42 | V | VENABLE high level | 5 |
| Enable input leakage current | ILKG-EN | 0.8 | 1.75 | µA | VEN = 3.3 V | 5 | |
| VBIAS changeover threshold | VBIAS-ON | 2.96 | 3.2 | V | VBIAS rising threshold | 5 | |
| Feedback voltage | VFB | 1.009 | 1.016 | 1.023 | V | TJ = 25°C | 6 |
| Feedback voltage | VFB | 0.999 | 1.016 | 1.031 | V | TJ = -40°C to 85°C | 6 |
| Feedback voltage | VFB | 0.999 | 1.016 | 1.039 | V | TJ = -40°C to 125°C | 6 |
| FB input leakage current | ILKG-FB | 0.2 | 65 | nA | FB = 1.011 V | 6 | |
| Peak inductor current limit | IHS-LIMIT | 1.04 | 1.33 | 1.56 | A | 6 | |
| Inductor current valley limit | ILS-LIMIT | 0.46 | 0.6 | 0.75 | A | 6 | |
| Soft-start charge current | ISSC | 1.17 | 2.2 | 2.85 | µA | 6 | |
| Power-good overvoltage tripping threshold | VPGOOD-HIGH | 110 | 113 | % | % of FB voltage | 6 | |
| Power-good undervoltage tripping threshold | VPGOOD-LOW | 83 | 90 | % | % of FB voltage | 6 | |
| PGOOD pulldown resistance when power bad | RPGOOD | 69 | 150 | Ω | LM43600A-Q1: VEN = 3.3 V | 6 | |
| PGOOD pulldown resistance when power bad | RPGOOD | 150 | 350 | Ω | LM43600A-Q1: VEN = 0 V | 6 | |
| Minimum high side MOSFET ON time | tON-MIN | 125 | 165 | ns | 7 | ||
| Minimum high side MOSFET OFF time | tOFF-MIN | 200 | 250 | ns | 7 | ||
| Oscillator default frequency | FOSC-DEFAULT | 445 | 500 | 570 | kHz | RT pin open circuit | 7 |
| Frequency adjust accuracy | FADJ | 10 | % | With 1% resistors at RT pin | 7 | ||
| VIN to PGND (abs max) | VIN | -0.3 | 42 | V | 4 | ||
| EN to PGND (abs max) | EN | -0.3 | V | max VIN + 0.3 V | 4 | ||
| FB, RT, SS/TRK to AGND (abs max) | -0.3 | 3.6 | V | 4 | |||
| PGOOD to AGND (abs max) | -0.3 | 15 | V | 4 | |||
| SYNC to AGND (abs max) | -0.3 | 5.5 | V | 4 | |||
| BIAS to AGND (abs max) | -0.3 | 30 | V | 4 | |||
| AGND to PGND (abs max) | -0.3 | 0.3 | V | 4 | |||
| SW to PGND less than 10-ns transients | -3.5 | 42 | V | 4 | |||
| CBOOT to SW (abs max) | -0.3 | 5.5 | V | 4 | |||
| VCC to AGND (abs max) | -0.3 | 3.6 | V | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | HBM per AEC Q100-002 | 4 | |
| ESD CDM | V(ESD) | -750 | 750 | V | CDM per AEC Q100-011 | 4 | |
| Input voltage VIN to PGND | VIN | 3.5 | 36 | V | 4 | ||
| EN voltage | EN | -0.3 | V | max VIN | 4 | ||
| FB voltage | FB | -0.3 | 1.1 | V | 4 | ||
| PGOOD voltage | PGOOD | -0.3 | 12 | V | 4 | ||
| BIAS input not used | BIAS | -0.3 | 0.3 | V | 4 | ||
| BIAS input used | BIAS | 3.3 | 28 | V | max VIN or 28 V, whichever is lower | 4 | |
| AGND to PGND | -0.1 | 0.1 | V | 4 | |||
| Output voltage | VOUT | 1 | 28 | V | 4 | ||
| Output current | IOUT | 0 | 0.5 | A | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 39.9 | °C/W | PWP 16 pins | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 26.9 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 21.7 | °C/W | 5 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 2.3 | °C/W | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | The SW pin connecting to the inductor should be as short as possible, and just wide enough to carry the load current without excessive heating. Short, thick traces or copper pours (shapes) should be u | 43 |
CAD (KiCad official)
- Symbol:
LM43600AQPWPRQ1 - Footprint:
Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm - 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)
- 3D model files:
lm43600aqpwprq1-etched.step/lm43600aqpwprq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm43600aqpwprq1.step/lm43600aqpwprq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (54 pp, sha256
af73d69576790700, retrieved 2026-11-02, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM43600AQPWPRQ1
**Texas Instruments** · DC-DC Converters · HTSSOP-16-EP
LM43600AQPWPRQ1 from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | passive | Switching output of the regulator, internally connected to both power MOSFETs; connect to the power inductor. |
| 2 | SW | passive | Switching output of the regulator, internally connected to both power MOSFETs; connect to the power inductor. |
| 3 | CBOOT | passive | Bootstrap capacitor connection for the high-side driver; connect a high-quality 470-nF capacitor from CBOOT to SW. |
| 4 | VCC | power_in | Internal bias supply output for bypassing; connect a bypass capacitor to AGND, do not connect an external load, and never short to ground during operation. |
| 5 | BIAS | power_in | Optional internal LDO supply input; tie to VOUT when 3.3 V ≤ VOUT ≤ 28 V or to an external 3.3 V or 5 V rail, with a 1 to 10 µF bypass capacitor, and tie to ground when not in use (do not float). |
| 6 | SYNC | input | Clock input to synchronize switching to an external clock; connect to ground if not used and do not float. |
| 7 | RT | passive | Connect a resistor RT to AGND to program the switching frequency; leave floating for the 500 kHz default. |
| 8 | PGOOD | output | Open-drain power-good flag output; use a 10-kΩ to 100-kΩ pullup to a logic rail or DC voltage no higher than 12 V. |
| 9 | FB | input | Feedback sense input connected to the midpoint of the feedback divider to set VOUT; do not short to ground during operation. |
| 10 | AGND | power_in | Analog ground, reference for internal references and logic; connect to system ground. |
| 11 | SS/TRK | input | Soft-start control pin; leave floating for internal soft-start, connect a capacitor to extend soft-start time or an external voltage ramp for tracking. |
| 12 | EN | input | Enable input (high = ON, low = OFF); connect to VIN, to VIN through a resistor divider, or to an external voltage or logic source, and do not float. |
| 13 | VIN | power_in | Supply input to the internal LDO and high-side power FET (3.5 V to 36 V recommended); connect to the supply and CIN bypass capacitors with a very short path. |
| 14 | VIN | power_in | Supply input to the internal LDO and high-side power FET (3.5 V to 36 V recommended); connect to the supply and CIN bypass capacitors with a very short path. |
| 15 | PGND | power_in | Power ground connected internally to the low-side power FET; connect to system ground, PAD, AGND, and CIN and COUT grounds. |
| 16 | PGND | power_in | Power ground connected internally to the low-side power FET; connect to system ground, PAD, AGND, and CIN and COUT grounds. |
| 17 | PAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-16-EP |
| Category | Power Supply Chip |
| Pins | 17 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Shutdown quiescent current | ISHDN | | 1.1 | 3.1 | µA | VEN = 0 V | 5 |
| Operating quiescent current (non-switching) from VIN | IQ-NONSW | | 6 | 11 | µA | VEN = 3.3 V, VFB = 1.5 V, VBIAS = 3.4 V external | 5 |
| Operating quiescent current (non-switching) from external VBIAS | IBIAS-NONSW | | 85 | 140 | µA | VEN = 3.3 V, VFB = 1.5 V, VBIAS = 3.4 V external | 5 |
| Minimum input voltage for start-up | VIN-MIN-ST | | | 3.8 | V | | 5 |
| Precision enable level for switching and regulator output | VEN-VOUT-H | 2 | 2.1 | 2.42 | V | VENABLE high level | 5 |
| Enable input leakage current | ILKG-EN | | 0.8 | 1.75 | µA | VEN = 3.3 V | 5 |
| VBIAS changeover threshold | VBIAS-ON | | 2.96 | 3.2 | V | VBIAS rising threshold | 5 |
| Feedback voltage | VFB | 1.009 | 1.016 | 1.023 | V | TJ = 25°C | 6 |
| Feedback voltage | VFB | 0.999 | 1.016 | 1.031 | V | TJ = -40°C to 85°C | 6 |
| Feedback voltage | VFB | 0.999 | 1.016 | 1.039 | V | TJ = -40°C to 125°C | 6 |
| FB input leakage current | ILKG-FB | | 0.2 | 65 | nA | FB = 1.011 V | 6 |
| Peak inductor current limit | IHS-LIMIT | 1.04 | 1.33 | 1.56 | A | | 6 |
| Inductor current valley limit | ILS-LIMIT | 0.46 | 0.6 | 0.75 | A | | 6 |
| Soft-start charge current | ISSC | 1.17 | 2.2 | 2.85 | µA | | 6 |
| Power-good overvoltage tripping threshold | VPGOOD-HIGH | | 110 | 113 | % | % of FB voltage | 6 |
| Power-good undervoltage tripping threshold | VPGOOD-LOW | 83 | 90 | | % | % of FB voltage | 6 |
| PGOOD pulldown resistance when power bad | RPGOOD | | 69 | 150 | Ω | LM43600A-Q1: VEN = 3.3 V | 6 |
| PGOOD pulldown resistance when power bad | RPGOOD | | 150 | 350 | Ω | LM43600A-Q1: VEN = 0 V | 6 |
| Minimum high side MOSFET ON time | tON-MIN | | 125 | 165 | ns | | 7 |
| Minimum high side MOSFET OFF time | tOFF-MIN | | 200 | 250 | ns | | 7 |
| Oscillator default frequency | FOSC-DEFAULT | 445 | 500 | 570 | kHz | RT pin open circuit | 7 |
| Frequency adjust accuracy | FADJ | | 10 | | % | With 1% resistors at RT pin | 7 |
| VIN to PGND (abs max) | VIN | -0.3 | | 42 | V | | 4 |
| EN to PGND (abs max) | EN | -0.3 | | | V | max VIN + 0.3 V | 4 |
| FB, RT, SS/TRK to AGND (abs max) | | -0.3 | | 3.6 | V | | 4 |
| PGOOD to AGND (abs max) | | -0.3 | | 15 | V | | 4 |
| SYNC to AGND (abs max) | | -0.3 | | 5.5 | V | | 4 |
| BIAS to AGND (abs max) | | -0.3 | | 30 | V | | 4 |
| AGND to PGND (abs max) | | -0.3 | | 0.3 | V | | 4 |
| SW to PGND less than 10-ns transients | | -3.5 | | 42 | V | | 4 |
| CBOOT to SW (abs max) | | -0.3 | | 5.5 | V | | 4 |
| VCC to AGND (abs max) | | -0.3 | | 3.6 | V | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| ESD HBM | V(ESD) | -2000 | | 2000 | V | HBM per AEC Q100-002 | 4 |
| ESD CDM | V(ESD) | -750 | | 750 | V | CDM per AEC Q100-011 | 4 |
| Input voltage VIN to PGND | VIN | 3.5 | | 36 | V | | 4 |
| EN voltage | EN | -0.3 | | | V | max VIN | 4 |
| FB voltage | FB | -0.3 | | 1.1 | V | | 4 |
| PGOOD voltage | PGOOD | -0.3 | | 12 | V | | 4 |
| BIAS input not used | BIAS | -0.3 | | 0.3 | V | | 4 |
| BIAS input used | BIAS | 3.3 | | 28 | V | max VIN or 28 V, whichever is lower | 4 |
| AGND to PGND | | -0.1 | | 0.1 | V | | 4 |
| Output voltage | VOUT | 1 | | 28 | V | | 4 |
| Output current | IOUT | 0 | | 0.5 | A | | 4 |
| Operating junction temperature | TJ | -40 | | 125 | °C | | 4 |
| Junction-to-ambient thermal resistance | RθJA | | 39.9 | | °C/W | PWP 16 pins | 5 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 26.9 | | °C/W | | 5 |
| Junction-to-board thermal resistance | RθJB | | 21.7 | | °C/W | | 5 |
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | | 2.3 | | °C/W | | 5 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | The SW pin connecting to the inductor should be as short as possible, and just wide enough to carry the load current without excessive heating. Short, thick traces or copper pours (shapes) should be u | 43 |
## CAD (KiCad official)
- Symbol: `LM43600AQPWPRQ1`
- Footprint: `Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm`
- 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)
- 3D model files: `lm43600aqpwprq1-etched.step` / `lm43600aqpwprq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm43600aqpwprq1.step` / `lm43600aqpwprq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm43600aqpwprq1.pdf) (54 pp, sha256 `af73d69576790700`, retrieved 2026-11-02, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm43600aqpwprq1-datasheet.pdf)