main
Ray
Publish 0.1.1
00b8074
LM431CCM3
Texas Instruments · Voltage Reference · SOT-23
LM431CCM3 from Texas Instruments, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cathode | bidirectional | Cathode is the shunt current/output voltage pin; the datasheet gives a cathode voltage range of VREF to 37 V and a continuous cathode current of 1 to 100 mA recommended (absolute maximum 150 mA). |
| 2 | Reference | input | Reference pin sets the adjustable output voltage through the external R1/R2 divider; reference input current is limited to 10 mA maximum and the absolute minimum reference voltage is -0.5 V. |
| 3 | Anode | power_in | Anode pin is normally grounded and is the common return for the shunt regulator. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference voltage (LM431C grade) | VREF | 2.485 | 2.5 | 2.51 | V | VZ = VREF, II = 10 mA, LM431C (Figure 6) | 5 |
| Deviation of reference input voltage over temperature | VDEV | 8 | 17 | mV | VZ = VREF, II = 10 mA, TA = full range (Figure 6) | 5 | |
| Ratio of change in reference voltage to change in cathode voltage, VZ from VREF to 10 V | ΔVREF/ΔVZ | -1.4 | -2.7 | mV/V | IZ = 10 mA, VZ from VREF to 10 V (Figure 7) | 5 | |
| Ratio of change in reference voltage to change in cathode voltage, VZ from 10 V to 36 V | ΔVREF/ΔVZ | -1 | -2 | mV/V | IZ = 10 mA, VZ from 10 V to 36 V (Figure 7) | 5 | |
| Reference input current | IREF | 2 | 4 | μA | R1 = 10 kΩ, R2 = ∞, II = 10 mA (Figure 7) | 5 | |
| Deviation of reference input current over temperature | ∝IREF | 0.4 | 1.2 | μA | R1 = 10 kΩ, R2 = ∞, II = 10 mA, TA = full range (Figure 7) | 5 | |
| Minimum cathode current for regulation | IZ(MIN) | 0.4 | 1 | mA | VZ = VREF (Figure 6) | 5 | |
| OFF-state current | IZ(OFF) | 0.3 | 1 | μA | VZ = 36 V, VREF = 0 V (Figure 8) | 5 | |
| Cathode voltage | 37 | V | 4 | ||||
| Reference voltage | -0.5 | V | 4 | ||||
| Continuous cathode current | -10 | 150 | mA | 4 | |||
| Reference input current | 10 | mA | 4 | ||||
| Internal power dissipation, SOT-23 package | 0.28 | W | Ratings at TA = 25°C; derate 2.2 mW/°C above 25°C | 4 | |||
| Operating temperature, commercial (LM431xC) | 0 | 70 | °C | 4 | |||
| Storage temperature | -65 | 150 | °C | 4 | |||
| Cathode voltage (VREF) | 37 | V | Operating free-air temperature range | 4 | |||
| Cathode current | 1 | 100 | mA | Operating free-air temperature range | 4 | ||
| Junction-to-ambient thermal resistance, DBZ (SOT-23) | RθJA | 267.7 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance, DBZ (SOT-23) | RθJC(top) | 138.3 | °C/W | 4 | |||
| Junction-to-board thermal resistance, DBZ (SOT-23) | RθJB | 61 | °C/W | 4 | |||
| Junction-to-top characterization parameter, DBZ (SOT-23) | ψJT | 21.5 | °C/W | 4 | |||
| Junction-to-board characterization parameter, DBZ (SOT-23) | ψJB | 60.1 | °C/W | 4 | |||
| Average temperature coefficient of reference voltage | 50 | ppm/°C | 1 |
CAD (KiCad official)
- Symbol:
LM431CCM3 - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.12 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm431ccm3-etched.step/lm431ccm3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm431ccm3.step/lm431ccm3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
9c0bcff4967eaad2, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM431CCM3
**Texas Instruments** · Voltage Reference · SOT-23
LM431CCM3 from Texas Instruments, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cathode | bidirectional | Cathode is the shunt current/output voltage pin; the datasheet gives a cathode voltage range of VREF to 37 V and a continuous cathode current of 1 to 100 mA recommended (absolute maximum 150 mA). |
| 2 | Reference | input | Reference pin sets the adjustable output voltage through the external R1/R2 divider; reference input current is limited to 10 mA maximum and the absolute minimum reference voltage is -0.5 V. |
| 3 | Anode | power_in | Anode pin is normally grounded and is the common return for the shunt regulator. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23 |
| Category | Power Management (PMIC) |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference voltage (LM431C grade) | VREF | 2.485 | 2.5 | 2.51 | V | VZ = VREF, II = 10 mA, LM431C (Figure 6) | 5 |
| Deviation of reference input voltage over temperature | VDEV | | 8 | 17 | mV | VZ = VREF, II = 10 mA, TA = full range (Figure 6) | 5 |
| Ratio of change in reference voltage to change in cathode voltage, VZ from VREF to 10 V | ΔVREF/ΔVZ | | -1.4 | -2.7 | mV/V | IZ = 10 mA, VZ from VREF to 10 V (Figure 7) | 5 |
| Ratio of change in reference voltage to change in cathode voltage, VZ from 10 V to 36 V | ΔVREF/ΔVZ | | -1 | -2 | mV/V | IZ = 10 mA, VZ from 10 V to 36 V (Figure 7) | 5 |
| Reference input current | IREF | | 2 | 4 | μA | R1 = 10 kΩ, R2 = ∞, II = 10 mA (Figure 7) | 5 |
| Deviation of reference input current over temperature | ∝IREF | | 0.4 | 1.2 | μA | R1 = 10 kΩ, R2 = ∞, II = 10 mA, TA = full range (Figure 7) | 5 |
| Minimum cathode current for regulation | IZ(MIN) | | 0.4 | 1 | mA | VZ = VREF (Figure 6) | 5 |
| OFF-state current | IZ(OFF) | | 0.3 | 1 | μA | VZ = 36 V, VREF = 0 V (Figure 8) | 5 |
| Cathode voltage | | | | 37 | V | | 4 |
| Reference voltage | | -0.5 | | | V | | 4 |
| Continuous cathode current | | -10 | | 150 | mA | | 4 |
| Reference input current | | | | 10 | mA | | 4 |
| Internal power dissipation, SOT-23 package | | | | 0.28 | W | Ratings at TA = 25°C; derate 2.2 mW/°C above 25°C | 4 |
| Operating temperature, commercial (LM431xC) | | 0 | | 70 | °C | | 4 |
| Storage temperature | | -65 | | 150 | °C | | 4 |
| Cathode voltage (VREF) | | | | 37 | V | Operating free-air temperature range | 4 |
| Cathode current | | 1 | | 100 | mA | Operating free-air temperature range | 4 |
| Junction-to-ambient thermal resistance, DBZ (SOT-23) | RθJA | | 267.7 | | °C/W | | 4 |
| Junction-to-case (top) thermal resistance, DBZ (SOT-23) | RθJC(top) | | 138.3 | | °C/W | | 4 |
| Junction-to-board thermal resistance, DBZ (SOT-23) | RθJB | | 61 | | °C/W | | 4 |
| Junction-to-top characterization parameter, DBZ (SOT-23) | ψJT | | 21.5 | | °C/W | | 4 |
| Junction-to-board characterization parameter, DBZ (SOT-23) | ψJB | | 60.1 | | °C/W | | 4 |
| Average temperature coefficient of reference voltage | | | | 50 | ppm/°C | | 1 |
## CAD (KiCad official)
- Symbol: `LM431CCM3`
- Footprint: `Package_TO_SOT_SMD:SOT-23`
- 3D model: SOT-23, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.12 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `lm431ccm3-etched.step` / `lm431ccm3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm431ccm3.step` / `lm431ccm3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm431.pdf) (37 pp, sha256 `9c0bcff4967eaad2`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm431ccm3-datasheet.pdf)