main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm431ccm3: viewers · Ray
lm431ccm3-etched.glb Publish 0.1.0 · Ray
lm431ccm3-etched.step lm431ccm3: factory component page (tier=mfr) · Ray
lm431ccm3-hero.glb lm431ccm3: hero GLB from the etched model (keeps the MPN mark) · Ray
lm431ccm3-hero.overlay.json Publish 0.1.1 · Ray
lm431ccm3.glb Publish 0.1.0 · Ray
lm431ccm3.kicad_mod Publish 0.1.0 · Ray
lm431ccm3.kicad_sym Publish 0.1.1 · Ray
lm431ccm3.lbr Publish 0.1.1 · Ray
lm431ccm3.step Publish 0.1.1 · Ray
package.json Publish 0.1.1 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.1 · Ray
verification.json Verified: Rebuilt by the parts factory: tier mfr, 3 pins · Ray

LM431CCM3

Texas Instruments · Voltage Reference · SOT-23

LM431CCM3 from Texas Instruments, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Cathode bidirectional Cathode is the shunt current/output voltage pin; the datasheet gives a cathode voltage range of VREF to 37 V and a continuous cathode current of 1 to 100 mA recommended (absolute maximum 150 mA).
2 Reference input Reference pin sets the adjustable output voltage through the external R1/R2 divider; reference input current is limited to 10 mA maximum and the absolute minimum reference voltage is -0.5 V.
3 Anode power_in Anode pin is normally grounded and is the common return for the shunt regulator.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23
Category Power Management (PMIC)
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reference voltage (LM431C grade) VREF 2.485 2.5 2.51 V VZ = VREF, II = 10 mA, LM431C (Figure 6) 5
Deviation of reference input voltage over temperature VDEV 8 17 mV VZ = VREF, II = 10 mA, TA = full range (Figure 6) 5
Ratio of change in reference voltage to change in cathode voltage, VZ from VREF to 10 V ΔVREF/ΔVZ -1.4 -2.7 mV/V IZ = 10 mA, VZ from VREF to 10 V (Figure 7) 5
Ratio of change in reference voltage to change in cathode voltage, VZ from 10 V to 36 V ΔVREF/ΔVZ -1 -2 mV/V IZ = 10 mA, VZ from 10 V to 36 V (Figure 7) 5
Reference input current IREF 2 4 μA R1 = 10 kΩ, R2 = ∞, II = 10 mA (Figure 7) 5
Deviation of reference input current over temperature ∝IREF 0.4 1.2 μA R1 = 10 kΩ, R2 = ∞, II = 10 mA, TA = full range (Figure 7) 5
Minimum cathode current for regulation IZ(MIN) 0.4 1 mA VZ = VREF (Figure 6) 5
OFF-state current IZ(OFF) 0.3 1 μA VZ = 36 V, VREF = 0 V (Figure 8) 5
Cathode voltage 37 V 4
Reference voltage -0.5 V 4
Continuous cathode current -10 150 mA 4
Reference input current 10 mA 4
Internal power dissipation, SOT-23 package 0.28 W Ratings at TA = 25°C; derate 2.2 mW/°C above 25°C 4
Operating temperature, commercial (LM431xC) 0 70 °C 4
Storage temperature -65 150 °C 4
Cathode voltage (VREF) 37 V Operating free-air temperature range 4
Cathode current 1 100 mA Operating free-air temperature range 4
Junction-to-ambient thermal resistance, DBZ (SOT-23) RθJA 267.7 °C/W 4
Junction-to-case (top) thermal resistance, DBZ (SOT-23) RθJC(top) 138.3 °C/W 4
Junction-to-board thermal resistance, DBZ (SOT-23) RθJB 61 °C/W 4
Junction-to-top characterization parameter, DBZ (SOT-23) ψJT 21.5 °C/W 4
Junction-to-board characterization parameter, DBZ (SOT-23) ψJB 60.1 °C/W 4
Average temperature coefficient of reference voltage 50 ppm/°C 1

CAD (KiCad official)

  • Symbol: LM431CCM3
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.12 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm431ccm3-etched.step / lm431ccm3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm431ccm3.step / lm431ccm3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 9c0bcff4967eaad2, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF