main
Ray Publish 0.1.0 de63f3c

LM4132DMFX-2.5

Texas Instruments · Voltage References · SOT-23-5

LM4132DMFX-2.5 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 N/C unconnected No connect pin; leave it floating.
2 GND power_in Ground reference for the device.
3 EN input Enable input: the device is on when EN is between 65% of VIN and VIN and in shutdown when EN is between 0 V and 35% of VIN, and EN must not exceed VIN.
4 VIN power_in Input supply that must be at least VREF + 400 mV and no more than 5.5 V (maximum input supply voltage 5.5 V).
5 VREF power_out Precision voltage reference output, rated for a maximum load current of 20 mA for the LM4132.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage initial accuracy (D grade, LM4132D-2.5) VREF -0.4 0.4 % LM4132D-2.5 (D Grade - 0.4%) 7
Temperature coefficient (LM4132D-2.5) TCVREF/°C 20 ppm/°C -40°C ≤ TJ ≤ 125°C 7
Supply current IQ 100 µA -40°C ≤ TJ ≤ 125°C 7
Supply current in shutdown IQ_SD 7 µA -40°C ≤ TJ ≤ 125°C 7
Load regulation ΔVREF/ΔILOAD 120 ppm/mA -40°C ≤ TJ ≤ 125°C 7
Dropout voltage VIN, VREF 400 mV -40°C ≤ TJ ≤ 125°C 7
Short-circuit current ISC 75 mA -40°C ≤ TJ ≤ 125°C 7
Enable pin maximum low input level VIL 35 % (VIN) -40°C ≤ TJ ≤ 125°C 7
Enable pin minimum high input level VIH 65 % (VIN) -40°C ≤ TJ ≤ 125°C 7
Maximum input supply voltage 5.5 V 4
Maximum load current (LM4132) 20 mA LM4132 (not LM4132-3.3-Q1) 4
Junction temperature TJ -40 125 °C 4
Maximum voltage on any input -0.3 6 V 3
Power dissipation 350 mW TA = 25°C 3
Lead temperature (soldering, 10 sec) 260 °C 10 sec 3
Vapor phase 215 °C 60 sec 3
Infrared 220 °C 15 sec 3
Storage temperature Tstg -65 150 °C 3
Supply current IQ 60 µA 7
Supply current in shutdown IQ_SD 3 µA EN = 0 V 7
Line regulation ΔVREF/ΔVIN 50 ppm/V VREF + 400 mV ≤ VIN ≤ 5.5 V 7
Load regulation ΔVREF/ΔILOAD 25 ppm/mA 0 mA ≤ ILOAD ≤ 20 mA 7
Long-term stability ΔVREF 50 ppm 1000 Hrs 7
Thermal hysteresis 75 ppm -40°C ≤ TJ ≤ 125°C 7
Dropout voltage VIN, VREF 175 mV ILOAD = 10 mA 7
Output noise voltage VN 240 µVPP 0.1 Hz to 10 Hz 7
Junction-to-ambient thermal resistance RθJA 164.1 °C/W DBV (SOT-23), 5 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 115.3 °C/W DBV (SOT-23), 5 pins 4
Junction-to-board thermal resistance RθJB 27.1 °C/W DBV (SOT-23), 5 pins 4
Junction-to-top characterization parameter ψJT 12.8 °C/W DBV (SOT-23), 5 pins 4
Junction-to-board characterization parameter ψJB 26.6 °C/W DBV (SOT-23), 5 pins 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LM4132DMFX-2.5
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm4132dmfx-2-5-etched.step / lm4132dmfx-2-5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm4132dmfx-2-5.step / lm4132dmfx-2-5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 0eee999ebdc056e2, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF