3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLM4132DMFX-2.5
Texas Instruments · Voltage References · SOT-23-5
LM4132DMFX-2.5 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N/C | unconnected | No connect pin; leave it floating. |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | EN | input | Enable input: the device is on when EN is between 65% of VIN and VIN and in shutdown when EN is between 0 V and 35% of VIN, and EN must not exceed VIN. |
| 4 | VIN | power_in | Input supply that must be at least VREF + 400 mV and no more than 5.5 V (maximum input supply voltage 5.5 V). |
| 5 | VREF | power_out | Precision voltage reference output, rated for a maximum load current of 20 mA for the LM4132. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage initial accuracy (D grade, LM4132D-2.5) | VREF | -0.4 | 0.4 | % | LM4132D-2.5 (D Grade - 0.4%) | 7 | |
| Temperature coefficient (LM4132D-2.5) | TCVREF/°C | 20 | ppm/°C | -40°C ≤ TJ ≤ 125°C | 7 | ||
| Supply current | IQ | 100 | µA | -40°C ≤ TJ ≤ 125°C | 7 | ||
| Supply current in shutdown | IQ_SD | 7 | µA | -40°C ≤ TJ ≤ 125°C | 7 | ||
| Load regulation | ΔVREF/ΔILOAD | 120 | ppm/mA | -40°C ≤ TJ ≤ 125°C | 7 | ||
| Dropout voltage | VIN, VREF | 400 | mV | -40°C ≤ TJ ≤ 125°C | 7 | ||
| Short-circuit current | ISC | 75 | mA | -40°C ≤ TJ ≤ 125°C | 7 | ||
| Enable pin maximum low input level | VIL | 35 | % (VIN) | -40°C ≤ TJ ≤ 125°C | 7 | ||
| Enable pin minimum high input level | VIH | 65 | % (VIN) | -40°C ≤ TJ ≤ 125°C | 7 | ||
| Maximum input supply voltage | 5.5 | V | 4 | ||||
| Maximum load current (LM4132) | 20 | mA | LM4132 (not LM4132-3.3-Q1) | 4 | |||
| Junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Maximum voltage on any input | -0.3 | 6 | V | 3 | |||
| Power dissipation | 350 | mW | TA = 25°C | 3 | |||
| Lead temperature (soldering, 10 sec) | 260 | °C | 10 sec | 3 | |||
| Vapor phase | 215 | °C | 60 sec | 3 | |||
| Infrared | 220 | °C | 15 sec | 3 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Supply current | IQ | 60 | µA | 7 | |||
| Supply current in shutdown | IQ_SD | 3 | µA | EN = 0 V | 7 | ||
| Line regulation | ΔVREF/ΔVIN | 50 | ppm/V | VREF + 400 mV ≤ VIN ≤ 5.5 V | 7 | ||
| Load regulation | ΔVREF/ΔILOAD | 25 | ppm/mA | 0 mA ≤ ILOAD ≤ 20 mA | 7 | ||
| Long-term stability | ΔVREF | 50 | ppm | 1000 Hrs | 7 | ||
| Thermal hysteresis | 75 | ppm | -40°C ≤ TJ ≤ 125°C | 7 | |||
| Dropout voltage | VIN, VREF | 175 | mV | ILOAD = 10 mA | 7 | ||
| Output noise voltage | VN | 240 | µVPP | 0.1 Hz to 10 Hz | 7 | ||
| Junction-to-ambient thermal resistance | RθJA | 164.1 | °C/W | DBV (SOT-23), 5 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 115.3 | °C/W | DBV (SOT-23), 5 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 27.1 | °C/W | DBV (SOT-23), 5 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 12.8 | °C/W | DBV (SOT-23), 5 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 26.6 | °C/W | DBV (SOT-23), 5 pins | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LM4132DMFX-2.5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm4132dmfx-2-5-etched.step/lm4132dmfx-2-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm4132dmfx-2-5.step/lm4132dmfx-2-5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
0eee999ebdc056e2, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).