main
Ray
Publish 0.1.1
85ab144
LM4132DMF-2.5
Texas Instruments · Voltage Reference · SOT-23-5
LM4132DMF-2.5 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N/C | unconnected | No connect pin; leave floating. |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | EN | input | Enable pin: an EN voltage between 65% of VIN and VIN enables the reference, and 0 V to 35% of VIN shuts it down; the device does not operate correctly for VEN > VIN. |
| 4 | VIN | power_in | Input supply, which must satisfy VIN > VREF + 400 mV and remain at or below the 5.5 V maximum input supply voltage. |
| 5 | VREF | power_out | Reference voltage output, 2.5 V for this option, able to supply up to 20 mA of load current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage initial accuracy (D grade, LM4132D-2.5) | VREF | -0.4 | 0.4 | % | 7 | ||
| Temperature coefficient (D grade, LM4132D-2.5) | TCVREF/°C | 20 | ppm/°C | 7 | |||
| Supply current | IQ | 100 | µA | -40°C ≤ TJ ≤ 125°C | 7 | ||
| Supply current in shutdown | IQ_SD | 7 | µA | -40°C ≤ TJ ≤ 125°C | 7 | ||
| Line regulation | ΔVREF/ΔVIN | 50 | ppm/V | VREF + 400 mV ≤ VIN ≤ 5.5 V | 7 | ||
| Load regulation | ΔVREF/ΔILOAD | 25 | ppm/mA | 0 mA ≤ ILOAD ≤ 20 mA | 7 | ||
| Load regulation | ΔVREF/ΔILOAD | 120 | ppm/mA | -40°C ≤ TJ ≤ 125°C | 7 | ||
| Dropout voltage | VIN, VREF | 400 | mV | -40°C ≤ TJ ≤ 125°C | 7 | ||
| Short-circuit current | ISC | 75 | mA | -40°C ≤ TJ ≤ 125°C | 7 | ||
| Enable pin maximum low input level | VIL | 35 | % (VIN) | -40°C ≤ TJ ≤ 125°C | 7 | ||
| Enable pin minimum high input level | VIH | 65 | % (VIN) | -40°C ≤ TJ ≤ 125°C | 7 | ||
| Maximum input supply voltage | 5.5 | V | 4 | ||||
| Maximum load current | 20 | mA | LM4132 | 4 | |||
| Junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Maximum voltage on any input | -0.3 | 6 | V | 3 | |||
| Power dissipation | 350 | mW | TA = 25°C | 3 | |||
| Lead temperature (soldering) | 260 | °C | 10 sec | 3 | |||
| Lead temperature (vapor phase) | 215 | °C | 60 sec | 3 | |||
| Lead temperature (infrared) | 220 | °C | 15 sec | 3 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| ESD human-body model | V(ESD) | -2000 | 2000 | V | Human-body model (HBM), per AEC Q100-002 | 4 | |
| Supply current | IQ | 60 | µA | 7 | |||
| Supply current in shutdown | IQ_SD | 3 | µA | EN = 0 V | 7 | ||
| Dropout voltage | VIN, VREF | 175 | mV | ILOAD = 10 mA | 7 | ||
| Output noise voltage | VN | 240 | µVPP | 0.1 Hz to 10 Hz | 7 | ||
| Long-term stability | ΔVREF | 50 | ppm | 1000 Hrs | 7 | ||
| Thermal hysteresis | 75 | ppm | -40°C ≤ TJ ≤ 125°C | 7 | |||
| Junction-to-ambient thermal resistance | RθJA | 164.1 | °C/W | DBV (SOT-23), 5 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 115.3 | °C/W | DBV (SOT-23), 5 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 27.1 | °C/W | DBV (SOT-23), 5 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 12.8 | °C/W | DBV (SOT-23), 5 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 26.6 | °C/W | DBV (SOT-23), 5 pins | 4 |
CAD (KiCad official)
- Symbol:
LM4132DMF-2.5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm4132dmf-2-5-etched.step/lm4132dmf-2-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm4132dmf-2-5.step/lm4132dmf-2-5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (44 pp, sha256
4bd8402ff026fdf1, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM4132DMF-2.5
**Texas Instruments** · Voltage Reference · SOT-23-5
LM4132DMF-2.5 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N/C | unconnected | No connect pin; leave floating. |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | EN | input | Enable pin: an EN voltage between 65% of VIN and VIN enables the reference, and 0 V to 35% of VIN shuts it down; the device does not operate correctly for VEN > VIN. |
| 4 | VIN | power_in | Input supply, which must satisfy VIN > VREF + 400 mV and remain at or below the 5.5 V maximum input supply voltage. |
| 5 | VREF | power_out | Reference voltage output, 2.5 V for this option, able to supply up to 20 mA of load current. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage initial accuracy (D grade, LM4132D-2.5) | VREF | -0.4 | | 0.4 | % | | 7 |
| Temperature coefficient (D grade, LM4132D-2.5) | TCVREF/°C | | | 20 | ppm/°C | | 7 |
| Supply current | IQ | | | 100 | µA | -40°C ≤ TJ ≤ 125°C | 7 |
| Supply current in shutdown | IQ_SD | | | 7 | µA | -40°C ≤ TJ ≤ 125°C | 7 |
| Line regulation | ΔVREF/ΔVIN | | | 50 | ppm/V | VREF + 400 mV ≤ VIN ≤ 5.5 V | 7 |
| Load regulation | ΔVREF/ΔILOAD | | | 25 | ppm/mA | 0 mA ≤ ILOAD ≤ 20 mA | 7 |
| Load regulation | ΔVREF/ΔILOAD | | | 120 | ppm/mA | -40°C ≤ TJ ≤ 125°C | 7 |
| Dropout voltage | VIN, VREF | | | 400 | mV | -40°C ≤ TJ ≤ 125°C | 7 |
| Short-circuit current | ISC | | | 75 | mA | -40°C ≤ TJ ≤ 125°C | 7 |
| Enable pin maximum low input level | VIL | | | 35 | % (VIN) | -40°C ≤ TJ ≤ 125°C | 7 |
| Enable pin minimum high input level | VIH | 65 | | | % (VIN) | -40°C ≤ TJ ≤ 125°C | 7 |
| Maximum input supply voltage | | | | 5.5 | V | | 4 |
| Maximum load current | | | | 20 | mA | LM4132 | 4 |
| Junction temperature | TJ | -40 | | 125 | °C | | 4 |
| Maximum voltage on any input | | -0.3 | | 6 | V | | 3 |
| Power dissipation | | | | 350 | mW | TA = 25°C | 3 |
| Lead temperature (soldering) | | | | 260 | °C | 10 sec | 3 |
| Lead temperature (vapor phase) | | | | 215 | °C | 60 sec | 3 |
| Lead temperature (infrared) | | | | 220 | °C | 15 sec | 3 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 3 |
| ESD human-body model | V(ESD) | -2000 | | 2000 | V | Human-body model (HBM), per AEC Q100-002 | 4 |
| Supply current | IQ | | 60 | | µA | | 7 |
| Supply current in shutdown | IQ_SD | | 3 | | µA | EN = 0 V | 7 |
| Dropout voltage | VIN, VREF | | 175 | | mV | ILOAD = 10 mA | 7 |
| Output noise voltage | VN | | 240 | | µVPP | 0.1 Hz to 10 Hz | 7 |
| Long-term stability | ΔVREF | | 50 | | ppm | 1000 Hrs | 7 |
| Thermal hysteresis | | | 75 | | ppm | -40°C ≤ TJ ≤ 125°C | 7 |
| Junction-to-ambient thermal resistance | RθJA | | 164.1 | | °C/W | DBV (SOT-23), 5 pins | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 115.3 | | °C/W | DBV (SOT-23), 5 pins | 4 |
| Junction-to-board thermal resistance | RθJB | | 27.1 | | °C/W | DBV (SOT-23), 5 pins | 4 |
| Junction-to-top characterization parameter | ψJT | | 12.8 | | °C/W | DBV (SOT-23), 5 pins | 4 |
| Junction-to-board characterization parameter | ψJB | | 26.6 | | °C/W | DBV (SOT-23), 5 pins | 4 |
## CAD (KiCad official)
- Symbol: `LM4132DMF-2.5`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `lm4132dmf-2-5-etched.step` / `lm4132dmf-2-5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm4132dmf-2-5.step` / `lm4132dmf-2-5.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm4132.pdf) (44 pp, sha256 `4bd8402ff026fdf1`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm4132dmf-2-5-datasheet.pdf)