main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.1 · Ray
viewers lm4132dmf-2-5: viewers · Ray
lm4132dmf-2-5-etched.glb Publish 0.1.1 · Ray
lm4132dmf-2-5-etched.step lm4132dmf-2-5: factory component page (tier=mfr) · Ray
lm4132dmf-2-5-hero.glb lm4132dmf-2-5: hero GLB from the etched model (keeps the MPN mark) · Ray
lm4132dmf-2-5-hero.overlay.json Publish 0.1.1 · Ray
lm4132dmf-2-5.glb Publish 0.1.1 · Ray
lm4132dmf-2-5.kicad_mod Publish 0.1.0 · Ray
lm4132dmf-2-5.kicad_sym Publish 0.1.0 · Ray
lm4132dmf-2-5.lbr Publish 0.1.1 · Ray
lm4132dmf-2-5.step Publish 0.1.1 · Ray
package.json Publish 0.1.1 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.1 · Ray
verification.json Verified: Rebuilt by the parts factory: tier mfr, 5 pins · Ray

LM4132DMF-2.5

Texas Instruments · Voltage Reference · SOT-23-5

LM4132DMF-2.5 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 N/C unconnected No connect pin; leave floating.
2 GND power_in Ground reference for the device.
3 EN input Enable pin: an EN voltage between 65% of VIN and VIN enables the reference, and 0 V to 35% of VIN shuts it down; the device does not operate correctly for VEN > VIN.
4 VIN power_in Input supply, which must satisfy VIN > VREF + 400 mV and remain at or below the 5.5 V maximum input supply voltage.
5 VREF power_out Reference voltage output, 2.5 V for this option, able to supply up to 20 mA of load current.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage initial accuracy (D grade, LM4132D-2.5) VREF -0.4 0.4 % 7
Temperature coefficient (D grade, LM4132D-2.5) TCVREF/°C 20 ppm/°C 7
Supply current IQ 100 µA -40°C ≤ TJ ≤ 125°C 7
Supply current in shutdown IQ_SD 7 µA -40°C ≤ TJ ≤ 125°C 7
Line regulation ΔVREF/ΔVIN 50 ppm/V VREF + 400 mV ≤ VIN ≤ 5.5 V 7
Load regulation ΔVREF/ΔILOAD 25 ppm/mA 0 mA ≤ ILOAD ≤ 20 mA 7
Load regulation ΔVREF/ΔILOAD 120 ppm/mA -40°C ≤ TJ ≤ 125°C 7
Dropout voltage VIN, VREF 400 mV -40°C ≤ TJ ≤ 125°C 7
Short-circuit current ISC 75 mA -40°C ≤ TJ ≤ 125°C 7
Enable pin maximum low input level VIL 35 % (VIN) -40°C ≤ TJ ≤ 125°C 7
Enable pin minimum high input level VIH 65 % (VIN) -40°C ≤ TJ ≤ 125°C 7
Maximum input supply voltage 5.5 V 4
Maximum load current 20 mA LM4132 4
Junction temperature TJ -40 125 °C 4
Maximum voltage on any input -0.3 6 V 3
Power dissipation 350 mW TA = 25°C 3
Lead temperature (soldering) 260 °C 10 sec 3
Lead temperature (vapor phase) 215 °C 60 sec 3
Lead temperature (infrared) 220 °C 15 sec 3
Storage temperature Tstg -65 150 °C 3
ESD human-body model V(ESD) -2000 2000 V Human-body model (HBM), per AEC Q100-002 4
Supply current IQ 60 µA 7
Supply current in shutdown IQ_SD 3 µA EN = 0 V 7
Dropout voltage VIN, VREF 175 mV ILOAD = 10 mA 7
Output noise voltage VN 240 µVPP 0.1 Hz to 10 Hz 7
Long-term stability ΔVREF 50 ppm 1000 Hrs 7
Thermal hysteresis 75 ppm -40°C ≤ TJ ≤ 125°C 7
Junction-to-ambient thermal resistance RθJA 164.1 °C/W DBV (SOT-23), 5 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 115.3 °C/W DBV (SOT-23), 5 pins 4
Junction-to-board thermal resistance RθJB 27.1 °C/W DBV (SOT-23), 5 pins 4
Junction-to-top characterization parameter ψJT 12.8 °C/W DBV (SOT-23), 5 pins 4
Junction-to-board characterization parameter ψJB 26.6 °C/W DBV (SOT-23), 5 pins 4

CAD (KiCad official)

  • Symbol: LM4132DMF-2.5
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm4132dmf-2-5-etched.step / lm4132dmf-2-5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm4132dmf-2-5.step / lm4132dmf-2-5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (44 pp, sha256 4bd8402ff026fdf1, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF