main
History Download
Ray Publish 0.1.0 5b152cd

LM4120IM5-2.5

Texas Instruments · Voltage References · SOT-23-5

LM4120IM5-2.5 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 REF unconnected The REF pin must be left unconnected in all cases, and it is sensitive to noise and capacitive loading, so it should be kept isolated on the PCB.
2 GND power_in Negative supply or ground connection.
3 Enable input Pulled to input for normal operation, and forcing this pin to ground turns off the output; floating this pin is not recommended.
4 VIN power_in Positive supply; the device operates with input voltages from 2 V to 12 V.
5 VOUT output Reference output, which can source and sink up to ±5 mA.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage initial accuracy VOUT -0.5 0.5 % LM4120-2.500 4
Temperature coefficient TCVOUT/°C 14 50 ppm/°C -40°C ≤ TA ≤ +125°C 4
Line regulation ΔVOUT/ΔVIN 0.0007 0.008 %/V 3.3 V ≤ VIN ≤ 12 V 4
Line regulation ΔVOUT/ΔVIN 0.01 %/V -40°C ≤ TA ≤ 85°C 4
Load regulation ΔVOUT/ΔILOAD 0.03 0.08 %/mA 0 mA ≤ ILOAD ≤ 1 mA 4
Load regulation ΔVOUT/ΔILOAD 0.17 %/mA -40°C ≤ TA ≤ 85°C 4
Load regulation ΔVOUT/ΔILOAD 0.01 0.04 %/mA 1 mA ≤ ILOAD ≤ 5 mA 4
Load regulation ΔVOUT/ΔILOAD 0.1 %/mA -40°C ≤ TA ≤ 85°C 4
Load regulation ΔVOUT/ΔILOAD 0.04 0.12 %/mA -1 mA ≤ ILOAD ≤ 0 mA 4
Dropout voltage VIN−VOUT 45 65 mV ILOAD = 0 mA 4
Dropout voltage VIN−VOUT 80 mV -40°C ≤ TA ≤ 85°C 4
Dropout voltage VIN−VOUT 120 150 mV ILOAD = 1 mA 4
Dropout voltage VIN−VOUT 180 mV -40°C ≤ TA ≤ 85°C 4
Dropout voltage VIN−VOUT 180 210 mV ILOAD = 5 mA 4
Dropout voltage VIN−VOUT 250 mV -40°C ≤ TA ≤ 85°C 4
Supply current IS 160 250 µA 5
Supply current IS 275 µA -40°C ≤ TA ≤ 85°C 5
Power-down supply current ISS 2 µA -40°C ≤ TA ≤ 85°C 5
Logic high input voltage VH 2.4 V -40°C ≤ TA ≤ 85°C 5
Logic low input voltage VL 0.2 V -40°C ≤ TA ≤ 85°C 5
Logic high input current IH 15 µA -40°C ≤ TA ≤ 85°C 5
Short circuit current ISC 6 30 mA VIN = 3.3 V, VOUT = 0; -40°C ≤ TA ≤ 85°C 5
Maximum voltage on input or enable pins -0.3 14 V 3
Power dissipation 350 mW TA = 25°C 3
Lead temperature, soldering (10 sec.) 260 °C Soldering, 10 sec. 3
Lead temperature, vapor phase (60 sec.) 215 °C Vapor phase, 60 sec. 3
Lead temperature, infrared (15 sec.) 220 °C Infrared, 15 sec. 3
Storage temperature Tstg -65 150 °C 3
Ambient temperature -40 85 °C 4
Junction temperature -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 170.4 °C/W DBV [SOT-23] 5-pin package 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LM4120IM5-2.5
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm4120im5-2-5-etched.step / lm4120im5-2-5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm4120im5-2-5.step / lm4120im5-2-5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (28 pp, sha256 0dff4ab1d99466fd, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF